1 /*-
2 * Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD: releng/8.0/sys/amd64/acpica/madt.c 193530 2009-06-05 18:44:36Z jkim $");
32
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/bus.h>
36 #include <sys/kernel.h>
37 #include <sys/malloc.h>
38 #include <sys/smp.h>
39
40 #include <vm/vm.h>
41 #include <vm/vm_param.h>
42 #include <vm/pmap.h>
43
44 #include <machine/apicreg.h>
45 #include <machine/frame.h>
46 #include <machine/intr_machdep.h>
47 #include <machine/apicvar.h>
48 #include <machine/md_var.h>
49 #include <machine/specialreg.h>
50
51 #include <contrib/dev/acpica/include/acpi.h>
52 #include <contrib/dev/acpica/include/accommon.h>
53 #include <contrib/dev/acpica/include/actables.h>
54
55 #include <dev/acpica/acpivar.h>
56 #include <dev/pci/pcivar.h>
57
58 typedef void madt_entry_handler(ACPI_SUBTABLE_HEADER *entry, void *arg);
59
60 /* These two arrays are indexed by APIC IDs. */
61 struct ioapic_info {
62 void *io_apic;
63 UINT32 io_vector;
64 } ioapics[MAX_APIC_ID + 1];
65
66 struct lapic_info {
67 u_int la_enabled:1;
68 u_int la_acpi_id:8;
69 } lapics[MAX_APIC_ID + 1];
70
71 static int madt_found_sci_override;
72 static ACPI_TABLE_MADT *madt;
73 static vm_paddr_t madt_physaddr;
74 static vm_offset_t madt_length;
75
76 MALLOC_DEFINE(M_MADT, "madt_table", "ACPI MADT Table Items");
77
78 static enum intr_polarity interrupt_polarity(UINT16 IntiFlags, UINT8 Source);
79 static enum intr_trigger interrupt_trigger(UINT16 IntiFlags, UINT8 Source);
80 static int madt_find_cpu(u_int acpi_id, u_int *apic_id);
81 static int madt_find_interrupt(int intr, void **apic, u_int *pin);
82 static void *madt_map(vm_paddr_t pa, int offset, vm_offset_t length);
83 static void *madt_map_table(vm_paddr_t pa, int offset, const char *sig);
84 static void madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg);
85 static void madt_parse_interrupt_override(
86 ACPI_MADT_INTERRUPT_OVERRIDE *intr);
87 static void madt_parse_ints(ACPI_SUBTABLE_HEADER *entry,
88 void *arg __unused);
89 static void madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi);
90 static void madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi);
91 static int madt_probe(void);
92 static int madt_probe_cpus(void);
93 static void madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry,
94 void *arg __unused);
95 static int madt_probe_table(vm_paddr_t address);
96 static void madt_register(void *dummy);
97 static int madt_setup_local(void);
98 static int madt_setup_io(void);
99 static void madt_unmap(void *data, vm_offset_t length);
100 static void madt_unmap_table(void *table);
101 static void madt_walk_table(madt_entry_handler *handler, void *arg);
102
103 static struct apic_enumerator madt_enumerator = {
104 "MADT",
105 madt_probe,
106 madt_probe_cpus,
107 madt_setup_local,
108 madt_setup_io
109 };
110
111 /*
112 * Code to abuse the crashdump map to map in the tables for the early
113 * probe. We cheat and make the following assumptions about how we
114 * use this KVA: pages 0 and 1 are used to map in the header of each
115 * table found via the RSDT or XSDT and pages 2 to n are used to map
116 * in the RSDT or XSDT. We have to use 2 pages for the table headers
117 * in case a header spans a page boundary. The offset is in pages;
118 * the length is in bytes.
119 */
120 static void *
121 madt_map(vm_paddr_t pa, int offset, vm_offset_t length)
122 {
123 vm_offset_t va, off;
124 void *data;
125
126 off = pa & PAGE_MASK;
127 length = roundup(length + off, PAGE_SIZE);
128 pa = pa & PG_FRAME;
129 va = (vm_offset_t)pmap_kenter_temporary(pa, offset) +
130 (offset * PAGE_SIZE);
131 data = (void *)(va + off);
132 length -= PAGE_SIZE;
133 while (length > 0) {
134 va += PAGE_SIZE;
135 pa += PAGE_SIZE;
136 length -= PAGE_SIZE;
137 pmap_kenter(va, pa);
138 invlpg(va);
139 }
140 return (data);
141 }
142
143 static void
144 madt_unmap(void *data, vm_offset_t length)
145 {
146 vm_offset_t va, off;
147
148 va = (vm_offset_t)data;
149 off = va & PAGE_MASK;
150 length = roundup(length + off, PAGE_SIZE);
151 va &= ~PAGE_MASK;
152 while (length > 0) {
153 pmap_kremove(va);
154 invlpg(va);
155 va += PAGE_SIZE;
156 length -= PAGE_SIZE;
157 }
158 }
159
160 static void *
161 madt_map_table(vm_paddr_t pa, int offset, const char *sig)
162 {
163 ACPI_TABLE_HEADER *header;
164 vm_offset_t length;
165 void *table;
166
167 header = madt_map(pa, offset, sizeof(ACPI_TABLE_HEADER));
168 if (strncmp(header->Signature, sig, ACPI_NAME_SIZE) != 0) {
169 madt_unmap(header, sizeof(ACPI_TABLE_HEADER));
170 return (NULL);
171 }
172 length = header->Length;
173 madt_unmap(header, sizeof(ACPI_TABLE_HEADER));
174 table = madt_map(pa, offset, length);
175 if (ACPI_FAILURE(AcpiTbChecksum(table, length))) {
176 if (bootverbose)
177 printf("MADT: Failed checksum for table %s\n", sig);
178 madt_unmap(table, length);
179 return (NULL);
180 }
181 return (table);
182 }
183
184 static void
185 madt_unmap_table(void *table)
186 {
187 ACPI_TABLE_HEADER *header;
188
189 header = (ACPI_TABLE_HEADER *)table;
190 madt_unmap(table, header->Length);
191 }
192
193 /*
194 * Look for an ACPI Multiple APIC Description Table ("APIC")
195 */
196 static int
197 madt_probe(void)
198 {
199 ACPI_PHYSICAL_ADDRESS rsdp_ptr;
200 ACPI_TABLE_RSDP *rsdp;
201 ACPI_TABLE_RSDT *rsdt;
202 ACPI_TABLE_XSDT *xsdt;
203 int i, count;
204
205 if (resource_disabled("acpi", 0))
206 return (ENXIO);
207
208 /*
209 * Map in the RSDP. Since ACPI uses AcpiOsMapMemory() which in turn
210 * calls pmap_mapbios() to find the RSDP, we assume that we can use
211 * pmap_mapbios() to map the RSDP.
212 */
213 if ((rsdp_ptr = AcpiOsGetRootPointer()) == 0)
214 return (ENXIO);
215 rsdp = pmap_mapbios(rsdp_ptr, sizeof(ACPI_TABLE_RSDP));
216 if (rsdp == NULL) {
217 if (bootverbose)
218 printf("MADT: Failed to map RSDP\n");
219 return (ENXIO);
220 }
221
222 /*
223 * For ACPI >= 2.0, use the XSDT if it is available.
224 * Otherwise, use the RSDT. We map the XSDT or RSDT at page 1
225 * in the crashdump area. Page 0 is used to map in the
226 * headers of candidate ACPI tables.
227 */
228 if (rsdp->Revision >= 2 && rsdp->XsdtPhysicalAddress != 0) {
229 /*
230 * AcpiOsGetRootPointer only verifies the checksum for
231 * the version 1.0 portion of the RSDP. Version 2.0 has
232 * an additional checksum that we verify first.
233 */
234 if (AcpiTbChecksum((UINT8 *)rsdp, ACPI_RSDP_XCHECKSUM_LENGTH)) {
235 if (bootverbose)
236 printf("MADT: RSDP failed extended checksum\n");
237 return (ENXIO);
238 }
239 xsdt = madt_map_table(rsdp->XsdtPhysicalAddress, 2,
240 ACPI_SIG_XSDT);
241 if (xsdt == NULL) {
242 if (bootverbose)
243 printf("MADT: Failed to map XSDT\n");
244 return (ENXIO);
245 }
246 count = (xsdt->Header.Length - sizeof(ACPI_TABLE_HEADER)) /
247 sizeof(UINT64);
248 for (i = 0; i < count; i++)
249 if (madt_probe_table(xsdt->TableOffsetEntry[i]))
250 break;
251 madt_unmap_table(xsdt);
252 } else {
253 rsdt = madt_map_table(rsdp->RsdtPhysicalAddress, 2,
254 ACPI_SIG_RSDT);
255 if (rsdt == NULL) {
256 if (bootverbose)
257 printf("MADT: Failed to map RSDT\n");
258 return (ENXIO);
259 }
260 count = (rsdt->Header.Length - sizeof(ACPI_TABLE_HEADER)) /
261 sizeof(UINT32);
262 for (i = 0; i < count; i++)
263 if (madt_probe_table(rsdt->TableOffsetEntry[i]))
264 break;
265 madt_unmap_table(rsdt);
266 }
267 pmap_unmapbios((vm_offset_t)rsdp, sizeof(ACPI_TABLE_RSDP));
268 if (madt_physaddr == 0) {
269 if (bootverbose)
270 printf("MADT: No MADT table found\n");
271 return (ENXIO);
272 }
273 if (bootverbose)
274 printf("MADT: Found table at 0x%jx\n",
275 (uintmax_t)madt_physaddr);
276
277 /*
278 * Verify that we can map the full table and that its checksum is
279 * correct, etc.
280 */
281 madt = madt_map_table(madt_physaddr, 0, ACPI_SIG_MADT);
282 if (madt == NULL)
283 return (ENXIO);
284 madt_unmap_table(madt);
285 madt = NULL;
286
287 return (0);
288 }
289
290 /*
291 * See if a given ACPI table is the MADT.
292 */
293 static int
294 madt_probe_table(vm_paddr_t address)
295 {
296 ACPI_TABLE_HEADER *table;
297
298 table = madt_map(address, 0, sizeof(ACPI_TABLE_HEADER));
299 if (table == NULL) {
300 if (bootverbose)
301 printf("MADT: Failed to map table at 0x%jx\n",
302 (uintmax_t)address);
303 return (0);
304 }
305 if (bootverbose)
306 printf("Table '%.4s' at 0x%jx\n", table->Signature,
307 (uintmax_t)address);
308
309 if (strncmp(table->Signature, ACPI_SIG_MADT, ACPI_NAME_SIZE) != 0) {
310 madt_unmap(table, sizeof(ACPI_TABLE_HEADER));
311 return (0);
312 }
313 madt_physaddr = address;
314 madt_length = table->Length;
315 madt_unmap(table, sizeof(ACPI_TABLE_HEADER));
316 return (1);
317 }
318
319 /*
320 * Run through the MP table enumerating CPUs.
321 */
322 static int
323 madt_probe_cpus(void)
324 {
325
326 madt = madt_map_table(madt_physaddr, 0, ACPI_SIG_MADT);
327 KASSERT(madt != NULL, ("Unable to re-map MADT"));
328 madt_walk_table(madt_probe_cpus_handler, NULL);
329 madt_unmap_table(madt);
330 madt = NULL;
331 return (0);
332 }
333
334 /*
335 * Initialize the local APIC on the BSP.
336 */
337 static int
338 madt_setup_local(void)
339 {
340
341 madt = pmap_mapbios(madt_physaddr, madt_length);
342 lapic_init(madt->Address);
343 printf("ACPI APIC Table: <%.*s %.*s>\n",
344 (int)sizeof(madt->Header.OemId), madt->Header.OemId,
345 (int)sizeof(madt->Header.OemTableId), madt->Header.OemTableId);
346
347 /*
348 * We ignore 64-bit local APIC override entries. Should we
349 * perhaps emit a warning here if we find one?
350 */
351 return (0);
352 }
353
354 /*
355 * Enumerate I/O APICs and setup interrupt sources.
356 */
357 static int
358 madt_setup_io(void)
359 {
360 void *ioapic;
361 u_int pin;
362 int i;
363
364 /* Try to initialize ACPI so that we can access the FADT. */
365 i = acpi_Startup();
366 if (ACPI_FAILURE(i)) {
367 printf("MADT: ACPI Startup failed with %s\n",
368 AcpiFormatException(i));
369 printf("Try disabling either ACPI or apic support.\n");
370 panic("Using MADT but ACPI doesn't work");
371 }
372
373 /* First, we run through adding I/O APIC's. */
374 madt_walk_table(madt_parse_apics, NULL);
375
376 /* Second, we run through the table tweaking interrupt sources. */
377 madt_walk_table(madt_parse_ints, NULL);
378
379 /*
380 * If there was not an explicit override entry for the SCI,
381 * force it to use level trigger and active-low polarity.
382 */
383 if (!madt_found_sci_override) {
384 if (madt_find_interrupt(AcpiGbl_FADT.SciInterrupt, &ioapic,
385 &pin) != 0)
386 printf("MADT: Could not find APIC for SCI IRQ %u\n",
387 AcpiGbl_FADT.SciInterrupt);
388 else {
389 printf(
390 "MADT: Forcing active-low polarity and level trigger for SCI\n");
391 ioapic_set_polarity(ioapic, pin, INTR_POLARITY_LOW);
392 ioapic_set_triggermode(ioapic, pin, INTR_TRIGGER_LEVEL);
393 }
394 }
395
396 /* Third, we register all the I/O APIC's. */
397 for (i = 0; i <= MAX_APIC_ID; i++)
398 if (ioapics[i].io_apic != NULL)
399 ioapic_register(ioapics[i].io_apic);
400
401 /* Finally, we throw the switch to enable the I/O APIC's. */
402 acpi_SetDefaultIntrModel(ACPI_INTR_APIC);
403
404 return (0);
405 }
406
407 static void
408 madt_register(void *dummy __unused)
409 {
410
411 apic_register_enumerator(&madt_enumerator);
412 }
413 SYSINIT(madt_register, SI_SUB_TUNABLES - 1, SI_ORDER_FIRST,
414 madt_register, NULL);
415
416 /*
417 * Call the handler routine for each entry in the MADT table.
418 */
419 static void
420 madt_walk_table(madt_entry_handler *handler, void *arg)
421 {
422 ACPI_SUBTABLE_HEADER *entry;
423 u_char *p, *end;
424
425 end = (u_char *)(madt) + madt->Header.Length;
426 for (p = (u_char *)(madt + 1); p < end; ) {
427 entry = (ACPI_SUBTABLE_HEADER *)p;
428 handler(entry, arg);
429 p += entry->Length;
430 }
431 }
432
433 static void
434 madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry, void *arg)
435 {
436 ACPI_MADT_LOCAL_APIC *proc;
437 struct lapic_info *la;
438
439 switch (entry->Type) {
440 case ACPI_MADT_TYPE_LOCAL_APIC:
441 /*
442 * The MADT does not include a BSP flag, so we have to
443 * let the MP code figure out which CPU is the BSP on
444 * its own.
445 */
446 proc = (ACPI_MADT_LOCAL_APIC *)entry;
447 if (bootverbose)
448 printf("MADT: Found CPU APIC ID %u ACPI ID %u: %s\n",
449 proc->Id, proc->ProcessorId,
450 (proc->LapicFlags & ACPI_MADT_ENABLED) ?
451 "enabled" : "disabled");
452 if (!(proc->LapicFlags & ACPI_MADT_ENABLED))
453 break;
454 if (proc->Id > MAX_APIC_ID)
455 panic("%s: CPU ID %u too high", __func__, proc->Id);
456 la = &lapics[proc->Id];
457 KASSERT(la->la_enabled == 0,
458 ("Duplicate local APIC ID %u", proc->Id));
459 la->la_enabled = 1;
460 la->la_acpi_id = proc->ProcessorId;
461 lapic_create(proc->Id, 0);
462 break;
463 }
464 }
465
466
467 /*
468 * Add an I/O APIC from an entry in the table.
469 */
470 static void
471 madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
472 {
473 ACPI_MADT_IO_APIC *apic;
474
475 switch (entry->Type) {
476 case ACPI_MADT_TYPE_IO_APIC:
477 apic = (ACPI_MADT_IO_APIC *)entry;
478 if (bootverbose)
479 printf(
480 "MADT: Found IO APIC ID %u, Interrupt %u at %p\n",
481 apic->Id, apic->GlobalIrqBase,
482 (void *)(uintptr_t)apic->Address);
483 if (apic->Id > MAX_APIC_ID)
484 panic("%s: I/O APIC ID %u too high", __func__,
485 apic->Id);
486 if (ioapics[apic->Id].io_apic != NULL)
487 panic("%s: Double APIC ID %u", __func__, apic->Id);
488 if (apic->GlobalIrqBase >= FIRST_MSI_INT) {
489 printf("MADT: Ignoring bogus I/O APIC ID %u", apic->Id);
490 break;
491 }
492 ioapics[apic->Id].io_apic = ioapic_create(apic->Address,
493 apic->Id, apic->GlobalIrqBase);
494 ioapics[apic->Id].io_vector = apic->GlobalIrqBase;
495 break;
496 default:
497 break;
498 }
499 }
500
501 /*
502 * Determine properties of an interrupt source. Note that for ACPI these
503 * functions are only used for ISA interrupts, so we assume ISA bus values
504 * (Active Hi, Edge Triggered) for conforming values except for the ACPI
505 * SCI for which we use Active Lo, Level Triggered.
506 */
507 static enum intr_polarity
508 interrupt_polarity(UINT16 IntiFlags, UINT8 Source)
509 {
510
511 switch (IntiFlags & ACPI_MADT_POLARITY_MASK) {
512 case ACPI_MADT_POLARITY_CONFORMS:
513 if (Source == AcpiGbl_FADT.SciInterrupt)
514 return (INTR_POLARITY_LOW);
515 else
516 return (INTR_POLARITY_HIGH);
517 case ACPI_MADT_POLARITY_ACTIVE_HIGH:
518 return (INTR_POLARITY_HIGH);
519 case ACPI_MADT_POLARITY_ACTIVE_LOW:
520 return (INTR_POLARITY_LOW);
521 default:
522 panic("Bogus Interrupt Polarity");
523 }
524 }
525
526 static enum intr_trigger
527 interrupt_trigger(UINT16 IntiFlags, UINT8 Source)
528 {
529
530 switch (IntiFlags & ACPI_MADT_TRIGGER_MASK) {
531 case ACPI_MADT_TRIGGER_CONFORMS:
532 if (Source == AcpiGbl_FADT.SciInterrupt)
533 return (INTR_TRIGGER_LEVEL);
534 else
535 return (INTR_TRIGGER_EDGE);
536 case ACPI_MADT_TRIGGER_EDGE:
537 return (INTR_TRIGGER_EDGE);
538 case ACPI_MADT_TRIGGER_LEVEL:
539 return (INTR_TRIGGER_LEVEL);
540 default:
541 panic("Bogus Interrupt Trigger Mode");
542 }
543 }
544
545 /*
546 * Find the local APIC ID associated with a given ACPI Processor ID.
547 */
548 static int
549 madt_find_cpu(u_int acpi_id, u_int *apic_id)
550 {
551 int i;
552
553 for (i = 0; i <= MAX_APIC_ID; i++) {
554 if (!lapics[i].la_enabled)
555 continue;
556 if (lapics[i].la_acpi_id != acpi_id)
557 continue;
558 *apic_id = i;
559 return (0);
560 }
561 return (ENOENT);
562 }
563
564 /*
565 * Find the IO APIC and pin on that APIC associated with a given global
566 * interrupt.
567 */
568 static int
569 madt_find_interrupt(int intr, void **apic, u_int *pin)
570 {
571 int i, best;
572
573 best = -1;
574 for (i = 0; i <= MAX_APIC_ID; i++) {
575 if (ioapics[i].io_apic == NULL ||
576 ioapics[i].io_vector > intr)
577 continue;
578 if (best == -1 ||
579 ioapics[best].io_vector < ioapics[i].io_vector)
580 best = i;
581 }
582 if (best == -1)
583 return (ENOENT);
584 *apic = ioapics[best].io_apic;
585 *pin = intr - ioapics[best].io_vector;
586 if (*pin > 32)
587 printf("WARNING: Found intpin of %u for vector %d\n", *pin,
588 intr);
589 return (0);
590 }
591
592 /*
593 * Parse an interrupt source override for an ISA interrupt.
594 */
595 static void
596 madt_parse_interrupt_override(ACPI_MADT_INTERRUPT_OVERRIDE *intr)
597 {
598 void *new_ioapic, *old_ioapic;
599 u_int new_pin, old_pin;
600 enum intr_trigger trig;
601 enum intr_polarity pol;
602 char buf[64];
603
604 if (acpi_quirks & ACPI_Q_MADT_IRQ0 && intr->SourceIrq == 0 &&
605 intr->GlobalIrq == 2) {
606 if (bootverbose)
607 printf("MADT: Skipping timer override\n");
608 return;
609 }
610 if (bootverbose)
611 printf("MADT: Interrupt override: source %u, irq %u\n",
612 intr->SourceIrq, intr->GlobalIrq);
613 KASSERT(intr->Bus == 0, ("bus for interrupt overrides must be zero"));
614 if (madt_find_interrupt(intr->GlobalIrq, &new_ioapic, &new_pin) != 0) {
615 printf("MADT: Could not find APIC for vector %u (IRQ %u)\n",
616 intr->GlobalIrq, intr->SourceIrq);
617 return;
618 }
619
620 /*
621 * Lookup the appropriate trigger and polarity modes for this
622 * entry.
623 */
624 trig = interrupt_trigger(intr->IntiFlags, intr->SourceIrq);
625 pol = interrupt_polarity(intr->IntiFlags, intr->SourceIrq);
626
627 /*
628 * If the SCI is identity mapped but has edge trigger and
629 * active-hi polarity or the force_sci_lo tunable is set,
630 * force it to use level/lo.
631 */
632 if (intr->SourceIrq == AcpiGbl_FADT.SciInterrupt) {
633 madt_found_sci_override = 1;
634 if (getenv_string("hw.acpi.sci.trigger", buf, sizeof(buf))) {
635 if (tolower(buf[0]) == 'e')
636 trig = INTR_TRIGGER_EDGE;
637 else if (tolower(buf[0]) == 'l')
638 trig = INTR_TRIGGER_LEVEL;
639 else
640 panic(
641 "Invalid trigger %s: must be 'edge' or 'level'",
642 buf);
643 printf("MADT: Forcing SCI to %s trigger\n",
644 trig == INTR_TRIGGER_EDGE ? "edge" : "level");
645 }
646 if (getenv_string("hw.acpi.sci.polarity", buf, sizeof(buf))) {
647 if (tolower(buf[0]) == 'h')
648 pol = INTR_POLARITY_HIGH;
649 else if (tolower(buf[0]) == 'l')
650 pol = INTR_POLARITY_LOW;
651 else
652 panic(
653 "Invalid polarity %s: must be 'high' or 'low'",
654 buf);
655 printf("MADT: Forcing SCI to active %s polarity\n",
656 pol == INTR_POLARITY_HIGH ? "high" : "low");
657 }
658 }
659
660 /* Remap the IRQ if it is mapped to a different interrupt vector. */
661 if (intr->SourceIrq != intr->GlobalIrq) {
662 /*
663 * If the SCI is remapped to a non-ISA global interrupt,
664 * then override the vector we use to setup and allocate
665 * the interrupt.
666 */
667 if (intr->GlobalIrq > 15 &&
668 intr->SourceIrq == AcpiGbl_FADT.SciInterrupt)
669 acpi_OverrideInterruptLevel(intr->GlobalIrq);
670 else
671 ioapic_remap_vector(new_ioapic, new_pin,
672 intr->SourceIrq);
673 if (madt_find_interrupt(intr->SourceIrq, &old_ioapic,
674 &old_pin) != 0)
675 printf("MADT: Could not find APIC for source IRQ %u\n",
676 intr->SourceIrq);
677 else if (ioapic_get_vector(old_ioapic, old_pin) ==
678 intr->SourceIrq)
679 ioapic_disable_pin(old_ioapic, old_pin);
680 }
681
682 /* Program the polarity and trigger mode. */
683 ioapic_set_triggermode(new_ioapic, new_pin, trig);
684 ioapic_set_polarity(new_ioapic, new_pin, pol);
685 }
686
687 /*
688 * Parse an entry for an NMI routed to an IO APIC.
689 */
690 static void
691 madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi)
692 {
693 void *ioapic;
694 u_int pin;
695
696 if (madt_find_interrupt(nmi->GlobalIrq, &ioapic, &pin) != 0) {
697 printf("MADT: Could not find APIC for vector %u\n",
698 nmi->GlobalIrq);
699 return;
700 }
701
702 ioapic_set_nmi(ioapic, pin);
703 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
704 ioapic_set_triggermode(ioapic, pin,
705 interrupt_trigger(nmi->IntiFlags, 0));
706 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
707 ioapic_set_polarity(ioapic, pin,
708 interrupt_polarity(nmi->IntiFlags, 0));
709 }
710
711 /*
712 * Parse an entry for an NMI routed to a local APIC LVT pin.
713 */
714 static void
715 madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi)
716 {
717 u_int apic_id, pin;
718
719 if (nmi->ProcessorId == 0xff)
720 apic_id = APIC_ID_ALL;
721 else if (madt_find_cpu(nmi->ProcessorId, &apic_id) != 0) {
722 if (bootverbose)
723 printf("MADT: Ignoring local NMI routed to "
724 "ACPI CPU %u\n", nmi->ProcessorId);
725 return;
726 }
727 if (nmi->Lint == 0)
728 pin = LVT_LINT0;
729 else
730 pin = LVT_LINT1;
731 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI);
732 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
733 lapic_set_lvt_triggermode(apic_id, pin,
734 interrupt_trigger(nmi->IntiFlags, 0));
735 if (!(nmi->IntiFlags & ACPI_MADT_POLARITY_CONFORMS))
736 lapic_set_lvt_polarity(apic_id, pin,
737 interrupt_polarity(nmi->IntiFlags, 0));
738 }
739
740 /*
741 * Parse interrupt entries.
742 */
743 static void
744 madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
745 {
746
747 switch (entry->Type) {
748 case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE:
749 madt_parse_interrupt_override(
750 (ACPI_MADT_INTERRUPT_OVERRIDE *)entry);
751 break;
752 case ACPI_MADT_TYPE_NMI_SOURCE:
753 madt_parse_nmi((ACPI_MADT_NMI_SOURCE *)entry);
754 break;
755 case ACPI_MADT_TYPE_LOCAL_APIC_NMI:
756 madt_parse_local_nmi((ACPI_MADT_LOCAL_APIC_NMI *)entry);
757 break;
758 }
759 }
760
761 /*
762 * Setup per-CPU ACPI IDs.
763 */
764 static void
765 madt_set_ids(void *dummy)
766 {
767 struct lapic_info *la;
768 struct pcpu *pc;
769 u_int i;
770
771 if (madt == NULL)
772 return;
773 for (i = 0; i < MAXCPU; i++) {
774 if (CPU_ABSENT(i))
775 continue;
776 pc = pcpu_find(i);
777 KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
778 la = &lapics[pc->pc_apic_id];
779 if (!la->la_enabled)
780 panic("APIC: CPU with APIC ID %u is not enabled",
781 pc->pc_apic_id);
782 pc->pc_acpi_id = la->la_acpi_id;
783 if (bootverbose)
784 printf("APIC: CPU %u has ACPI ID %u\n", i,
785 la->la_acpi_id);
786 }
787 }
788 SYSINIT(madt_set_ids, SI_SUB_CPU, SI_ORDER_ANY, madt_set_ids, NULL);
Cache object: 7fcd16b2b3ed58b101bbddb141ecf7a0
|