FreeBSD/Linux Kernel Cross Reference
sys/amd64/amd64/fpu.c
1 /*-
2 * Copyright (c) 1990 William Jolitz.
3 * Copyright (c) 1991 The Regents of the University of California.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 4. Neither the name of the University nor the names of its contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 *
30 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91
31 */
32
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
35
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/bus.h>
39 #include <sys/kernel.h>
40 #include <sys/lock.h>
41 #include <sys/malloc.h>
42 #include <sys/module.h>
43 #include <sys/mutex.h>
44 #include <sys/mutex.h>
45 #include <sys/proc.h>
46 #include <sys/sysctl.h>
47 #include <machine/bus.h>
48 #include <sys/rman.h>
49 #include <sys/signalvar.h>
50 #include <vm/uma.h>
51
52 #include <machine/cputypes.h>
53 #include <machine/frame.h>
54 #include <machine/intr_machdep.h>
55 #include <machine/md_var.h>
56 #include <machine/pcb.h>
57 #include <machine/psl.h>
58 #include <machine/resource.h>
59 #include <machine/specialreg.h>
60 #include <machine/segments.h>
61 #include <machine/ucontext.h>
62
63 /*
64 * Floating point support.
65 */
66
67 #if defined(__GNUCLIKE_ASM) && !defined(lint)
68
69 #define fldcw(cw) __asm __volatile("fldcw %0" : : "m" (cw))
70 #define fnclex() __asm __volatile("fnclex")
71 #define fninit() __asm __volatile("fninit")
72 #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr)))
73 #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=am" (*(addr)))
74 #define fxrstor(addr) __asm __volatile("fxrstor %0" : : "m" (*(addr)))
75 #define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr)))
76 #define ldmxcsr(csr) __asm __volatile("ldmxcsr %0" : : "m" (csr))
77 #define stmxcsr(addr) __asm __volatile("stmxcsr %0" : : "m" (*(addr)))
78
79 static __inline void
80 xrstor(char *addr, uint64_t mask)
81 {
82 uint32_t low, hi;
83
84 low = mask;
85 hi = mask >> 32;
86 __asm __volatile("xrstor %0" : : "m" (*addr), "a" (low), "d" (hi));
87 }
88
89 static __inline void
90 xsave(char *addr, uint64_t mask)
91 {
92 uint32_t low, hi;
93
94 low = mask;
95 hi = mask >> 32;
96 __asm __volatile("xsave %0" : "=m" (*addr) : "a" (low), "d" (hi) :
97 "memory");
98 }
99
100 #else /* !(__GNUCLIKE_ASM && !lint) */
101
102 void fldcw(u_short cw);
103 void fnclex(void);
104 void fninit(void);
105 void fnstcw(caddr_t addr);
106 void fnstsw(caddr_t addr);
107 void fxsave(caddr_t addr);
108 void fxrstor(caddr_t addr);
109 void ldmxcsr(u_int csr);
110 void stmxcsr(u_int *csr);
111 void xrstor(char *addr, uint64_t mask);
112 void xsave(char *addr, uint64_t mask);
113
114 #endif /* __GNUCLIKE_ASM && !lint */
115
116 #define start_emulating() load_cr0(rcr0() | CR0_TS)
117 #define stop_emulating() clts()
118
119 CTASSERT(sizeof(struct savefpu) == 512);
120 CTASSERT(sizeof(struct xstate_hdr) == 64);
121 CTASSERT(sizeof(struct savefpu_ymm) == 832);
122
123 /*
124 * This requirement is to make it easier for asm code to calculate
125 * offset of the fpu save area from the pcb address. FPU save area
126 * must be 64-byte aligned.
127 */
128 CTASSERT(sizeof(struct pcb) % XSAVE_AREA_ALIGN == 0);
129
130 /*
131 * Ensure the copy of XCR0 saved in a core is contained in the padding
132 * area.
133 */
134 CTASSERT(X86_XSTATE_XCR0_OFFSET >= offsetof(struct savefpu, sv_pad) &&
135 X86_XSTATE_XCR0_OFFSET + sizeof(uint64_t) <= sizeof(struct savefpu));
136
137 static void fpu_clean_state(void);
138
139 SYSCTL_INT(_hw, HW_FLOATINGPT, floatingpoint, CTLFLAG_RD,
140 SYSCTL_NULL_INT_PTR, 1, "Floating point instructions executed in hardware");
141
142 int lazy_fpu_switch = 0;
143 SYSCTL_INT(_hw, OID_AUTO, lazy_fpu_switch, CTLFLAG_RWTUN | CTLFLAG_NOFETCH,
144 &lazy_fpu_switch, 0,
145 "Lazily load FPU context after context switch");
146
147 int use_xsave; /* non-static for cpu_switch.S */
148 uint64_t xsave_mask; /* the same */
149 static uma_zone_t fpu_save_area_zone;
150 static struct savefpu *fpu_initialstate;
151
152 struct xsave_area_elm_descr {
153 u_int offset;
154 u_int size;
155 } *xsave_area_desc;
156
157 void
158 fpusave(void *addr)
159 {
160
161 if (use_xsave)
162 xsave((char *)addr, xsave_mask);
163 else
164 fxsave((char *)addr);
165 }
166
167 void
168 fpurestore(void *addr)
169 {
170
171 if (use_xsave)
172 xrstor((char *)addr, xsave_mask);
173 else
174 fxrstor((char *)addr);
175 }
176
177 void
178 fpususpend(void *addr)
179 {
180 u_long cr0;
181
182 cr0 = rcr0();
183 stop_emulating();
184 fpusave(addr);
185 load_cr0(cr0);
186 }
187
188 void
189 fpuresume(void *addr)
190 {
191 u_long cr0;
192
193 cr0 = rcr0();
194 stop_emulating();
195 fninit();
196 if (use_xsave)
197 load_xcr(XCR0, xsave_mask);
198 fpurestore(addr);
199 load_cr0(cr0);
200 }
201
202 /*
203 * Enable XSAVE if supported and allowed by user.
204 * Calculate the xsave_mask.
205 */
206 static void
207 fpuinit_bsp1(void)
208 {
209 u_int cp[4];
210 uint64_t xsave_mask_user;
211
212 TUNABLE_INT_FETCH("hw.lazy_fpu_switch", &lazy_fpu_switch);
213 if ((cpu_feature2 & CPUID2_XSAVE) != 0) {
214 use_xsave = 1;
215 TUNABLE_INT_FETCH("hw.use_xsave", &use_xsave);
216 }
217 if (!use_xsave)
218 return;
219
220 cpuid_count(0xd, 0x0, cp);
221 xsave_mask = XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE;
222 if ((cp[0] & xsave_mask) != xsave_mask)
223 panic("CPU0 does not support X87 or SSE: %x", cp[0]);
224 xsave_mask = ((uint64_t)cp[3] << 32) | cp[0];
225 xsave_mask_user = xsave_mask;
226 TUNABLE_ULONG_FETCH("hw.xsave_mask", &xsave_mask_user);
227 xsave_mask_user |= XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE;
228 xsave_mask &= xsave_mask_user;
229 if ((xsave_mask & XFEATURE_AVX512) != XFEATURE_AVX512)
230 xsave_mask &= ~XFEATURE_AVX512;
231 if ((xsave_mask & XFEATURE_MPX) != XFEATURE_MPX)
232 xsave_mask &= ~XFEATURE_MPX;
233
234 cpuid_count(0xd, 0x1, cp);
235 if ((cp[0] & CPUID_EXTSTATE_XSAVEOPT) != 0) {
236 /*
237 * Patch the XSAVE instruction in the cpu_switch code
238 * to XSAVEOPT. We assume that XSAVE encoding used
239 * REX byte, and set the bit 4 of the r/m byte.
240 */
241 ctx_switch_xsave[3] |= 0x10;
242 }
243 }
244
245 /*
246 * Calculate the fpu save area size.
247 */
248 static void
249 fpuinit_bsp2(void)
250 {
251 u_int cp[4];
252
253 if (use_xsave) {
254 cpuid_count(0xd, 0x0, cp);
255 cpu_max_ext_state_size = cp[1];
256
257 /*
258 * Reload the cpu_feature2, since we enabled OSXSAVE.
259 */
260 do_cpuid(1, cp);
261 cpu_feature2 = cp[2];
262 } else
263 cpu_max_ext_state_size = sizeof(struct savefpu);
264 }
265
266 /*
267 * Initialize the floating point unit.
268 */
269 void
270 fpuinit(void)
271 {
272 register_t saveintr;
273 u_int mxcsr;
274 u_short control;
275
276 if (IS_BSP())
277 fpuinit_bsp1();
278
279 if (use_xsave) {
280 load_cr4(rcr4() | CR4_XSAVE);
281 load_xcr(XCR0, xsave_mask);
282 }
283
284 /*
285 * XCR0 shall be set up before CPU can report the save area size.
286 */
287 if (IS_BSP())
288 fpuinit_bsp2();
289
290 /*
291 * It is too early for critical_enter() to work on AP.
292 */
293 saveintr = intr_disable();
294 stop_emulating();
295 fninit();
296 control = __INITIAL_FPUCW__;
297 fldcw(control);
298 mxcsr = __INITIAL_MXCSR__;
299 ldmxcsr(mxcsr);
300 start_emulating();
301 intr_restore(saveintr);
302 }
303
304 /*
305 * On the boot CPU we generate a clean state that is used to
306 * initialize the floating point unit when it is first used by a
307 * process.
308 */
309 static void
310 fpuinitstate(void *arg __unused)
311 {
312 register_t saveintr;
313 int cp[4], i, max_ext_n;
314
315 fpu_initialstate = malloc(cpu_max_ext_state_size, M_DEVBUF,
316 M_WAITOK | M_ZERO);
317 saveintr = intr_disable();
318 stop_emulating();
319
320 fpusave(fpu_initialstate);
321 if (fpu_initialstate->sv_env.en_mxcsr_mask)
322 cpu_mxcsr_mask = fpu_initialstate->sv_env.en_mxcsr_mask;
323 else
324 cpu_mxcsr_mask = 0xFFBF;
325
326 /*
327 * The fninit instruction does not modify XMM registers or x87
328 * registers (MM/ST). The fpusave call dumped the garbage
329 * contained in the registers after reset to the initial state
330 * saved. Clear XMM and x87 registers file image to make the
331 * startup program state and signal handler XMM/x87 register
332 * content predictable.
333 */
334 bzero(fpu_initialstate->sv_fp, sizeof(fpu_initialstate->sv_fp));
335 bzero(fpu_initialstate->sv_xmm, sizeof(fpu_initialstate->sv_xmm));
336
337 /*
338 * Create a table describing the layout of the CPU Extended
339 * Save Area.
340 */
341 if (use_xsave) {
342 max_ext_n = flsl(xsave_mask);
343 xsave_area_desc = malloc(max_ext_n * sizeof(struct
344 xsave_area_elm_descr), M_DEVBUF, M_WAITOK | M_ZERO);
345 /* x87 state */
346 xsave_area_desc[0].offset = 0;
347 xsave_area_desc[0].size = 160;
348 /* XMM */
349 xsave_area_desc[1].offset = 160;
350 xsave_area_desc[1].size = 288 - 160;
351
352 for (i = 2; i < max_ext_n; i++) {
353 cpuid_count(0xd, i, cp);
354 xsave_area_desc[i].offset = cp[1];
355 xsave_area_desc[i].size = cp[0];
356 }
357 }
358
359 fpu_save_area_zone = uma_zcreate("FPU_save_area",
360 cpu_max_ext_state_size, NULL, NULL, NULL, NULL,
361 XSAVE_AREA_ALIGN - 1, 0);
362
363 start_emulating();
364 intr_restore(saveintr);
365 }
366 SYSINIT(fpuinitstate, SI_SUB_DRIVERS, SI_ORDER_ANY, fpuinitstate, NULL);
367
368 /*
369 * Free coprocessor (if we have it).
370 */
371 void
372 fpuexit(struct thread *td)
373 {
374
375 critical_enter();
376 if (curthread == PCPU_GET(fpcurthread)) {
377 stop_emulating();
378 fpusave(curpcb->pcb_save);
379 start_emulating();
380 PCPU_SET(fpcurthread, NULL);
381 }
382 critical_exit();
383 }
384
385 int
386 fpuformat(void)
387 {
388
389 return (_MC_FPFMT_XMM);
390 }
391
392 /*
393 * The following mechanism is used to ensure that the FPE_... value
394 * that is passed as a trapcode to the signal handler of the user
395 * process does not have more than one bit set.
396 *
397 * Multiple bits may be set if the user process modifies the control
398 * word while a status word bit is already set. While this is a sign
399 * of bad coding, we have no choise than to narrow them down to one
400 * bit, since we must not send a trapcode that is not exactly one of
401 * the FPE_ macros.
402 *
403 * The mechanism has a static table with 127 entries. Each combination
404 * of the 7 FPU status word exception bits directly translates to a
405 * position in this table, where a single FPE_... value is stored.
406 * This FPE_... value stored there is considered the "most important"
407 * of the exception bits and will be sent as the signal code. The
408 * precedence of the bits is based upon Intel Document "Numerical
409 * Applications", Chapter "Special Computational Situations".
410 *
411 * The macro to choose one of these values does these steps: 1) Throw
412 * away status word bits that cannot be masked. 2) Throw away the bits
413 * currently masked in the control word, assuming the user isn't
414 * interested in them anymore. 3) Reinsert status word bit 7 (stack
415 * fault) if it is set, which cannot be masked but must be presered.
416 * 4) Use the remaining bits to point into the trapcode table.
417 *
418 * The 6 maskable bits in order of their preference, as stated in the
419 * above referenced Intel manual:
420 * 1 Invalid operation (FP_X_INV)
421 * 1a Stack underflow
422 * 1b Stack overflow
423 * 1c Operand of unsupported format
424 * 1d SNaN operand.
425 * 2 QNaN operand (not an exception, irrelavant here)
426 * 3 Any other invalid-operation not mentioned above or zero divide
427 * (FP_X_INV, FP_X_DZ)
428 * 4 Denormal operand (FP_X_DNML)
429 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL)
430 * 6 Inexact result (FP_X_IMP)
431 */
432 static char fpetable[128] = {
433 0,
434 FPE_FLTINV, /* 1 - INV */
435 FPE_FLTUND, /* 2 - DNML */
436 FPE_FLTINV, /* 3 - INV | DNML */
437 FPE_FLTDIV, /* 4 - DZ */
438 FPE_FLTINV, /* 5 - INV | DZ */
439 FPE_FLTDIV, /* 6 - DNML | DZ */
440 FPE_FLTINV, /* 7 - INV | DNML | DZ */
441 FPE_FLTOVF, /* 8 - OFL */
442 FPE_FLTINV, /* 9 - INV | OFL */
443 FPE_FLTUND, /* A - DNML | OFL */
444 FPE_FLTINV, /* B - INV | DNML | OFL */
445 FPE_FLTDIV, /* C - DZ | OFL */
446 FPE_FLTINV, /* D - INV | DZ | OFL */
447 FPE_FLTDIV, /* E - DNML | DZ | OFL */
448 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */
449 FPE_FLTUND, /* 10 - UFL */
450 FPE_FLTINV, /* 11 - INV | UFL */
451 FPE_FLTUND, /* 12 - DNML | UFL */
452 FPE_FLTINV, /* 13 - INV | DNML | UFL */
453 FPE_FLTDIV, /* 14 - DZ | UFL */
454 FPE_FLTINV, /* 15 - INV | DZ | UFL */
455 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */
456 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */
457 FPE_FLTOVF, /* 18 - OFL | UFL */
458 FPE_FLTINV, /* 19 - INV | OFL | UFL */
459 FPE_FLTUND, /* 1A - DNML | OFL | UFL */
460 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */
461 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */
462 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */
463 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */
464 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */
465 FPE_FLTRES, /* 20 - IMP */
466 FPE_FLTINV, /* 21 - INV | IMP */
467 FPE_FLTUND, /* 22 - DNML | IMP */
468 FPE_FLTINV, /* 23 - INV | DNML | IMP */
469 FPE_FLTDIV, /* 24 - DZ | IMP */
470 FPE_FLTINV, /* 25 - INV | DZ | IMP */
471 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */
472 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */
473 FPE_FLTOVF, /* 28 - OFL | IMP */
474 FPE_FLTINV, /* 29 - INV | OFL | IMP */
475 FPE_FLTUND, /* 2A - DNML | OFL | IMP */
476 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */
477 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */
478 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */
479 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */
480 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */
481 FPE_FLTUND, /* 30 - UFL | IMP */
482 FPE_FLTINV, /* 31 - INV | UFL | IMP */
483 FPE_FLTUND, /* 32 - DNML | UFL | IMP */
484 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */
485 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */
486 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */
487 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */
488 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */
489 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */
490 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */
491 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */
492 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */
493 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */
494 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */
495 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */
496 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */
497 FPE_FLTSUB, /* 40 - STK */
498 FPE_FLTSUB, /* 41 - INV | STK */
499 FPE_FLTUND, /* 42 - DNML | STK */
500 FPE_FLTSUB, /* 43 - INV | DNML | STK */
501 FPE_FLTDIV, /* 44 - DZ | STK */
502 FPE_FLTSUB, /* 45 - INV | DZ | STK */
503 FPE_FLTDIV, /* 46 - DNML | DZ | STK */
504 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */
505 FPE_FLTOVF, /* 48 - OFL | STK */
506 FPE_FLTSUB, /* 49 - INV | OFL | STK */
507 FPE_FLTUND, /* 4A - DNML | OFL | STK */
508 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */
509 FPE_FLTDIV, /* 4C - DZ | OFL | STK */
510 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */
511 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */
512 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */
513 FPE_FLTUND, /* 50 - UFL | STK */
514 FPE_FLTSUB, /* 51 - INV | UFL | STK */
515 FPE_FLTUND, /* 52 - DNML | UFL | STK */
516 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */
517 FPE_FLTDIV, /* 54 - DZ | UFL | STK */
518 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */
519 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */
520 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */
521 FPE_FLTOVF, /* 58 - OFL | UFL | STK */
522 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */
523 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */
524 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */
525 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */
526 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */
527 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */
528 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */
529 FPE_FLTRES, /* 60 - IMP | STK */
530 FPE_FLTSUB, /* 61 - INV | IMP | STK */
531 FPE_FLTUND, /* 62 - DNML | IMP | STK */
532 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */
533 FPE_FLTDIV, /* 64 - DZ | IMP | STK */
534 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */
535 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */
536 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */
537 FPE_FLTOVF, /* 68 - OFL | IMP | STK */
538 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */
539 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */
540 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */
541 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */
542 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */
543 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */
544 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */
545 FPE_FLTUND, /* 70 - UFL | IMP | STK */
546 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */
547 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */
548 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */
549 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */
550 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */
551 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */
552 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */
553 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */
554 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */
555 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */
556 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */
557 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */
558 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */
559 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */
560 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */
561 };
562
563 /*
564 * Read the FP status and control words, then generate si_code value
565 * for SIGFPE. The error code chosen will be one of the
566 * FPE_... macros. It will be sent as the second argument to old
567 * BSD-style signal handlers and as "siginfo_t->si_code" (second
568 * argument) to SA_SIGINFO signal handlers.
569 *
570 * Some time ago, we cleared the x87 exceptions with FNCLEX there.
571 * Clearing exceptions was necessary mainly to avoid IRQ13 bugs. The
572 * usermode code which understands the FPU hardware enough to enable
573 * the exceptions, can also handle clearing the exception state in the
574 * handler. The only consequence of not clearing the exception is the
575 * rethrow of the SIGFPE on return from the signal handler and
576 * reexecution of the corresponding instruction.
577 *
578 * For XMM traps, the exceptions were never cleared.
579 */
580 int
581 fputrap_x87(void)
582 {
583 struct savefpu *pcb_save;
584 u_short control, status;
585
586 critical_enter();
587
588 /*
589 * Interrupt handling (for another interrupt) may have pushed the
590 * state to memory. Fetch the relevant parts of the state from
591 * wherever they are.
592 */
593 if (PCPU_GET(fpcurthread) != curthread) {
594 pcb_save = curpcb->pcb_save;
595 control = pcb_save->sv_env.en_cw;
596 status = pcb_save->sv_env.en_sw;
597 } else {
598 fnstcw(&control);
599 fnstsw(&status);
600 }
601
602 critical_exit();
603 return (fpetable[status & ((~control & 0x3f) | 0x40)]);
604 }
605
606 int
607 fputrap_sse(void)
608 {
609 u_int mxcsr;
610
611 critical_enter();
612 if (PCPU_GET(fpcurthread) != curthread)
613 mxcsr = curpcb->pcb_save->sv_env.en_mxcsr;
614 else
615 stmxcsr(&mxcsr);
616 critical_exit();
617 return (fpetable[(mxcsr & (~mxcsr >> 7)) & 0x3f]);
618 }
619
620 static void
621 restore_fpu_curthread(struct thread *td)
622 {
623 struct pcb *pcb;
624
625 /*
626 * Record new context early in case frstor causes a trap.
627 */
628 PCPU_SET(fpcurthread, td);
629
630 stop_emulating();
631 fpu_clean_state();
632 pcb = td->td_pcb;
633
634 if ((pcb->pcb_flags & PCB_FPUINITDONE) == 0) {
635 /*
636 * This is the first time this thread has used the FPU or
637 * the PCB doesn't contain a clean FPU state. Explicitly
638 * load an initial state.
639 *
640 * We prefer to restore the state from the actual save
641 * area in PCB instead of directly loading from
642 * fpu_initialstate, to ignite the XSAVEOPT
643 * tracking engine.
644 */
645 bcopy(fpu_initialstate, pcb->pcb_save,
646 cpu_max_ext_state_size);
647 fpurestore(pcb->pcb_save);
648 if (pcb->pcb_initial_fpucw != __INITIAL_FPUCW__)
649 fldcw(pcb->pcb_initial_fpucw);
650 if (PCB_USER_FPU(pcb))
651 set_pcb_flags(pcb, PCB_FPUINITDONE |
652 PCB_USERFPUINITDONE);
653 else
654 set_pcb_flags(pcb, PCB_FPUINITDONE);
655 } else
656 fpurestore(pcb->pcb_save);
657 }
658
659 /*
660 * Device Not Available (DNA, #NM) exception handler.
661 *
662 * It would be better to switch FP context here (if curthread !=
663 * fpcurthread) and not necessarily for every context switch, but it
664 * is too hard to access foreign pcb's.
665 */
666 void
667 fpudna(void)
668 {
669 struct thread *td;
670
671 td = curthread;
672 /*
673 * This handler is entered with interrupts enabled, so context
674 * switches may occur before critical_enter() is executed. If
675 * a context switch occurs, then when we regain control, our
676 * state will have been completely restored. The CPU may
677 * change underneath us, but the only part of our context that
678 * lives in the CPU is CR0.TS and that will be "restored" by
679 * setting it on the new CPU.
680 */
681 critical_enter();
682
683 if (__predict_false(PCPU_GET(fpcurthread) == td)) {
684 /*
685 * Some virtual machines seems to set %cr0.TS at
686 * arbitrary moments. Silently clear the TS bit
687 * regardless of the eager/lazy FPU context switch
688 * mode.
689 */
690 stop_emulating();
691 } else {
692 if (__predict_false(PCPU_GET(fpcurthread) != NULL)) {
693 panic(
694 "fpudna: fpcurthread = %p (%d), curthread = %p (%d)\n",
695 PCPU_GET(fpcurthread),
696 PCPU_GET(fpcurthread)->td_tid, td, td->td_tid);
697 }
698 restore_fpu_curthread(td);
699 }
700 critical_exit();
701 }
702
703 void fpu_activate_sw(struct thread *td); /* Called from the context switch */
704 void
705 fpu_activate_sw(struct thread *td)
706 {
707
708 if (lazy_fpu_switch || (td->td_pflags & TDP_KTHREAD) != 0 ||
709 !PCB_USER_FPU(td->td_pcb)) {
710 PCPU_SET(fpcurthread, NULL);
711 start_emulating();
712 } else if (PCPU_GET(fpcurthread) != td) {
713 restore_fpu_curthread(td);
714 }
715 }
716
717 void
718 fpudrop(void)
719 {
720 struct thread *td;
721
722 td = PCPU_GET(fpcurthread);
723 KASSERT(td == curthread, ("fpudrop: fpcurthread != curthread"));
724 CRITICAL_ASSERT(td);
725 PCPU_SET(fpcurthread, NULL);
726 clear_pcb_flags(td->td_pcb, PCB_FPUINITDONE);
727 start_emulating();
728 }
729
730 /*
731 * Get the user state of the FPU into pcb->pcb_user_save without
732 * dropping ownership (if possible). It returns the FPU ownership
733 * status.
734 */
735 int
736 fpugetregs(struct thread *td)
737 {
738 struct pcb *pcb;
739 uint64_t *xstate_bv, bit;
740 char *sa;
741 int max_ext_n, i, owned;
742
743 pcb = td->td_pcb;
744 critical_enter();
745 if ((pcb->pcb_flags & PCB_USERFPUINITDONE) == 0) {
746 bcopy(fpu_initialstate, get_pcb_user_save_pcb(pcb),
747 cpu_max_ext_state_size);
748 get_pcb_user_save_pcb(pcb)->sv_env.en_cw =
749 pcb->pcb_initial_fpucw;
750 fpuuserinited(td);
751 critical_exit();
752 return (_MC_FPOWNED_PCB);
753 }
754 if (td == PCPU_GET(fpcurthread) && PCB_USER_FPU(pcb)) {
755 fpusave(get_pcb_user_save_pcb(pcb));
756 owned = _MC_FPOWNED_FPU;
757 } else {
758 owned = _MC_FPOWNED_PCB;
759 }
760 if (use_xsave) {
761 /*
762 * Handle partially saved state.
763 */
764 sa = (char *)get_pcb_user_save_pcb(pcb);
765 xstate_bv = (uint64_t *)(sa + sizeof(struct savefpu) +
766 offsetof(struct xstate_hdr, xstate_bv));
767 max_ext_n = flsl(xsave_mask);
768 for (i = 0; i < max_ext_n; i++) {
769 bit = 1ULL << i;
770 if ((xsave_mask & bit) == 0 || (*xstate_bv & bit) != 0)
771 continue;
772 bcopy((char *)fpu_initialstate +
773 xsave_area_desc[i].offset,
774 sa + xsave_area_desc[i].offset,
775 xsave_area_desc[i].size);
776 *xstate_bv |= bit;
777 }
778 }
779 critical_exit();
780 return (owned);
781 }
782
783 void
784 fpuuserinited(struct thread *td)
785 {
786 struct pcb *pcb;
787
788 CRITICAL_ASSERT(td);
789 pcb = td->td_pcb;
790 if (PCB_USER_FPU(pcb))
791 set_pcb_flags(pcb,
792 PCB_FPUINITDONE | PCB_USERFPUINITDONE);
793 else
794 set_pcb_flags(pcb, PCB_FPUINITDONE);
795 }
796
797 int
798 fpusetxstate(struct thread *td, char *xfpustate, size_t xfpustate_size)
799 {
800 struct xstate_hdr *hdr, *ehdr;
801 size_t len, max_len;
802 uint64_t bv;
803
804 /* XXXKIB should we clear all extended state in xstate_bv instead ? */
805 if (xfpustate == NULL)
806 return (0);
807 if (!use_xsave)
808 return (EOPNOTSUPP);
809
810 len = xfpustate_size;
811 if (len < sizeof(struct xstate_hdr))
812 return (EINVAL);
813 max_len = cpu_max_ext_state_size - sizeof(struct savefpu);
814 if (len > max_len)
815 return (EINVAL);
816
817 ehdr = (struct xstate_hdr *)xfpustate;
818 bv = ehdr->xstate_bv;
819
820 /*
821 * Avoid #gp.
822 */
823 if (bv & ~xsave_mask)
824 return (EINVAL);
825
826 hdr = (struct xstate_hdr *)(get_pcb_user_save_td(td) + 1);
827
828 hdr->xstate_bv = bv;
829 bcopy(xfpustate + sizeof(struct xstate_hdr),
830 (char *)(hdr + 1), len - sizeof(struct xstate_hdr));
831
832 return (0);
833 }
834
835 /*
836 * Set the state of the FPU.
837 */
838 int
839 fpusetregs(struct thread *td, struct savefpu *addr, char *xfpustate,
840 size_t xfpustate_size)
841 {
842 struct pcb *pcb;
843 int error;
844
845 addr->sv_env.en_mxcsr &= cpu_mxcsr_mask;
846 pcb = td->td_pcb;
847 error = 0;
848 critical_enter();
849 if (td == PCPU_GET(fpcurthread) && PCB_USER_FPU(pcb)) {
850 error = fpusetxstate(td, xfpustate, xfpustate_size);
851 if (error == 0) {
852 bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr));
853 fpurestore(get_pcb_user_save_td(td));
854 set_pcb_flags(pcb, PCB_FPUINITDONE |
855 PCB_USERFPUINITDONE);
856 }
857 } else {
858 error = fpusetxstate(td, xfpustate, xfpustate_size);
859 if (error == 0) {
860 bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr));
861 fpuuserinited(td);
862 }
863 }
864 critical_exit();
865 return (error);
866 }
867
868 /*
869 * On AuthenticAMD processors, the fxrstor instruction does not restore
870 * the x87's stored last instruction pointer, last data pointer, and last
871 * opcode values, except in the rare case in which the exception summary
872 * (ES) bit in the x87 status word is set to 1.
873 *
874 * In order to avoid leaking this information across processes, we clean
875 * these values by performing a dummy load before executing fxrstor().
876 */
877 static void
878 fpu_clean_state(void)
879 {
880 static float dummy_variable = 0.0;
881 u_short status;
882
883 /*
884 * Clear the ES bit in the x87 status word if it is currently
885 * set, in order to avoid causing a fault in the upcoming load.
886 */
887 fnstsw(&status);
888 if (status & 0x80)
889 fnclex();
890
891 /*
892 * Load the dummy variable into the x87 stack. This mangles
893 * the x87 stack, but we don't care since we're about to call
894 * fxrstor() anyway.
895 */
896 __asm __volatile("ffree %%st(7); flds %0" : : "m" (dummy_variable));
897 }
898
899 /*
900 * This really sucks. We want the acpi version only, but it requires
901 * the isa_if.h file in order to get the definitions.
902 */
903 #include "opt_isa.h"
904 #ifdef DEV_ISA
905 #include <isa/isavar.h>
906 /*
907 * This sucks up the legacy ISA support assignments from PNPBIOS/ACPI.
908 */
909 static struct isa_pnp_id fpupnp_ids[] = {
910 { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */
911 { 0 }
912 };
913
914 static int
915 fpupnp_probe(device_t dev)
916 {
917 int result;
918
919 result = ISA_PNP_PROBE(device_get_parent(dev), dev, fpupnp_ids);
920 if (result <= 0)
921 device_quiet(dev);
922 return (result);
923 }
924
925 static int
926 fpupnp_attach(device_t dev)
927 {
928
929 return (0);
930 }
931
932 static device_method_t fpupnp_methods[] = {
933 /* Device interface */
934 DEVMETHOD(device_probe, fpupnp_probe),
935 DEVMETHOD(device_attach, fpupnp_attach),
936 DEVMETHOD(device_detach, bus_generic_detach),
937 DEVMETHOD(device_shutdown, bus_generic_shutdown),
938 DEVMETHOD(device_suspend, bus_generic_suspend),
939 DEVMETHOD(device_resume, bus_generic_resume),
940
941 { 0, 0 }
942 };
943
944 static driver_t fpupnp_driver = {
945 "fpupnp",
946 fpupnp_methods,
947 1, /* no softc */
948 };
949
950 static devclass_t fpupnp_devclass;
951
952 DRIVER_MODULE(fpupnp, acpi, fpupnp_driver, fpupnp_devclass, 0, 0);
953 #endif /* DEV_ISA */
954
955 static MALLOC_DEFINE(M_FPUKERN_CTX, "fpukern_ctx",
956 "Kernel contexts for FPU state");
957
958 #define FPU_KERN_CTX_FPUINITDONE 0x01
959 #define FPU_KERN_CTX_DUMMY 0x02 /* avoided save for the kern thread */
960
961 struct fpu_kern_ctx {
962 struct savefpu *prev;
963 uint32_t flags;
964 char hwstate1[];
965 };
966
967 struct fpu_kern_ctx *
968 fpu_kern_alloc_ctx(u_int flags)
969 {
970 struct fpu_kern_ctx *res;
971 size_t sz;
972
973 sz = sizeof(struct fpu_kern_ctx) + XSAVE_AREA_ALIGN +
974 cpu_max_ext_state_size;
975 res = malloc(sz, M_FPUKERN_CTX, ((flags & FPU_KERN_NOWAIT) ?
976 M_NOWAIT : M_WAITOK) | M_ZERO);
977 return (res);
978 }
979
980 void
981 fpu_kern_free_ctx(struct fpu_kern_ctx *ctx)
982 {
983
984 /* XXXKIB clear the memory ? */
985 free(ctx, M_FPUKERN_CTX);
986 }
987
988 static struct savefpu *
989 fpu_kern_ctx_savefpu(struct fpu_kern_ctx *ctx)
990 {
991 vm_offset_t p;
992
993 p = (vm_offset_t)&ctx->hwstate1;
994 p = roundup2(p, XSAVE_AREA_ALIGN);
995 return ((struct savefpu *)p);
996 }
997
998 int
999 fpu_kern_enter(struct thread *td, struct fpu_kern_ctx *ctx, u_int flags)
1000 {
1001 struct pcb *pcb;
1002
1003 if ((flags & FPU_KERN_KTHR) != 0 && is_fpu_kern_thread(0)) {
1004 ctx->flags = FPU_KERN_CTX_DUMMY;
1005 return (0);
1006 }
1007 pcb = td->td_pcb;
1008 critical_enter();
1009 KASSERT(!PCB_USER_FPU(pcb) || pcb->pcb_save ==
1010 get_pcb_user_save_pcb(pcb), ("mangled pcb_save"));
1011 ctx->flags = 0;
1012 if ((pcb->pcb_flags & PCB_FPUINITDONE) != 0)
1013 ctx->flags |= FPU_KERN_CTX_FPUINITDONE;
1014 fpuexit(td);
1015 ctx->prev = pcb->pcb_save;
1016 pcb->pcb_save = fpu_kern_ctx_savefpu(ctx);
1017 set_pcb_flags(pcb, PCB_KERNFPU);
1018 clear_pcb_flags(pcb, PCB_FPUINITDONE);
1019 critical_exit();
1020 return (0);
1021 }
1022
1023 int
1024 fpu_kern_leave(struct thread *td, struct fpu_kern_ctx *ctx)
1025 {
1026 struct pcb *pcb;
1027
1028 if (is_fpu_kern_thread(0) && (ctx->flags & FPU_KERN_CTX_DUMMY) != 0)
1029 return (0);
1030 KASSERT((ctx->flags & FPU_KERN_CTX_DUMMY) == 0, ("dummy ctx"));
1031 pcb = td->td_pcb;
1032 critical_enter();
1033 if (curthread == PCPU_GET(fpcurthread))
1034 fpudrop();
1035 pcb->pcb_save = ctx->prev;
1036 if (pcb->pcb_save == get_pcb_user_save_pcb(pcb)) {
1037 if ((pcb->pcb_flags & PCB_USERFPUINITDONE) != 0) {
1038 set_pcb_flags(pcb, PCB_FPUINITDONE);
1039 clear_pcb_flags(pcb, PCB_KERNFPU);
1040 } else
1041 clear_pcb_flags(pcb, PCB_FPUINITDONE | PCB_KERNFPU);
1042 } else {
1043 if ((ctx->flags & FPU_KERN_CTX_FPUINITDONE) != 0)
1044 set_pcb_flags(pcb, PCB_FPUINITDONE);
1045 else
1046 clear_pcb_flags(pcb, PCB_FPUINITDONE);
1047 KASSERT(!PCB_USER_FPU(pcb), ("unpaired fpu_kern_leave"));
1048 }
1049 critical_exit();
1050 return (0);
1051 }
1052
1053 int
1054 fpu_kern_thread(u_int flags)
1055 {
1056
1057 KASSERT((curthread->td_pflags & TDP_KTHREAD) != 0,
1058 ("Only kthread may use fpu_kern_thread"));
1059 KASSERT(curpcb->pcb_save == get_pcb_user_save_pcb(curpcb),
1060 ("mangled pcb_save"));
1061 KASSERT(PCB_USER_FPU(curpcb), ("recursive call"));
1062
1063 set_pcb_flags(curpcb, PCB_KERNFPU);
1064 return (0);
1065 }
1066
1067 int
1068 is_fpu_kern_thread(u_int flags)
1069 {
1070
1071 if ((curthread->td_pflags & TDP_KTHREAD) == 0)
1072 return (0);
1073 return ((curpcb->pcb_flags & PCB_KERNFPU) != 0);
1074 }
1075
1076 /*
1077 * FPU save area alloc/free/init utility routines
1078 */
1079 struct savefpu *
1080 fpu_save_area_alloc(void)
1081 {
1082
1083 return (uma_zalloc(fpu_save_area_zone, 0));
1084 }
1085
1086 void
1087 fpu_save_area_free(struct savefpu *fsa)
1088 {
1089
1090 uma_zfree(fpu_save_area_zone, fsa);
1091 }
1092
1093 void
1094 fpu_save_area_reset(struct savefpu *fsa)
1095 {
1096
1097 bcopy(fpu_initialstate, fsa, cpu_max_ext_state_size);
1098 }
Cache object: bcc964c197ba61f6c015368113d9b6e4
|