The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/amd64/amd64/mptable.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
    3  * Copyright (c) 1996, by Steve Passe
    4  * All rights reserved.
    5  *
    6  * Redistribution and use in source and binary forms, with or without
    7  * modification, are permitted provided that the following conditions
    8  * are met:
    9  * 1. Redistributions of source code must retain the above copyright
   10  *    notice, this list of conditions and the following disclaimer.
   11  * 2. The name of the developer may NOT be used to endorse or promote products
   12  *    derived from this software without specific prior written permission.
   13  *
   14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   24  * SUCH DAMAGE.
   25  */
   26 
   27 #include <sys/cdefs.h>
   28 __FBSDID("$FreeBSD: releng/7.3/sys/amd64/amd64/mptable.c 180695 2008-07-22 14:27:47Z rwatson $");
   29 
   30 #include <sys/param.h>
   31 #include <sys/systm.h>
   32 #include <sys/bus.h>
   33 #include <sys/kernel.h>
   34 #include <sys/malloc.h>
   35 
   36 #include <vm/vm.h>
   37 #include <vm/vm_param.h>
   38 #include <vm/pmap.h>
   39 
   40 #include <machine/apicreg.h>
   41 #include <machine/frame.h>
   42 #include <machine/intr_machdep.h>
   43 #include <machine/apicvar.h>
   44 #include <machine/md_var.h>
   45 #include <machine/mptable.h>
   46 #include <machine/specialreg.h>
   47 
   48 #include <dev/pci/pcivar.h>
   49 
   50 /* string defined by the Intel MP Spec as identifying the MP table */
   51 #define MP_SIG                  0x5f504d5f      /* _MP_ */
   52 
   53 #define MAX_LAPIC_ID            63      /* Max local APIC ID for HTT fixup */
   54 
   55 #define BIOS_BASE               (0xf0000)
   56 #define BIOS_SIZE               (0x10000)
   57 #define BIOS_COUNT              (BIOS_SIZE/4)
   58 
   59 typedef void mptable_entry_handler(u_char *entry, void *arg);
   60 
   61 static basetable_entry basetable_entry_types[] =
   62 {
   63         {0, 20, "Processor"},
   64         {1, 8, "Bus"},
   65         {2, 8, "I/O APIC"},
   66         {3, 8, "I/O INT"},
   67         {4, 8, "Local INT"}
   68 };
   69 
   70 typedef struct BUSDATA {
   71         u_char  bus_id;
   72         enum busTypes bus_type;
   73 }       bus_datum;
   74 
   75 typedef struct INTDATA {
   76         u_char  int_type;
   77         u_short int_flags;
   78         u_char  src_bus_id;
   79         u_char  src_bus_irq;
   80         u_char  dst_apic_id;
   81         u_char  dst_apic_int;
   82         u_char  int_vector;
   83 }       io_int, local_int;
   84 
   85 typedef struct BUSTYPENAME {
   86         u_char  type;
   87         char    name[7];
   88 }       bus_type_name;
   89 
   90 /* From MP spec v1.4, table 4-8. */
   91 static bus_type_name bus_type_table[] =
   92 {
   93         {UNKNOWN_BUSTYPE, "CBUS  "},
   94         {UNKNOWN_BUSTYPE, "CBUSII"},
   95         {EISA, "EISA  "},
   96         {UNKNOWN_BUSTYPE, "FUTURE"},
   97         {UNKNOWN_BUSTYPE, "INTERN"},
   98         {ISA, "ISA   "},
   99         {UNKNOWN_BUSTYPE, "MBI   "},
  100         {UNKNOWN_BUSTYPE, "MBII  "},
  101         {MCA, "MCA   "},
  102         {UNKNOWN_BUSTYPE, "MPI   "},
  103         {UNKNOWN_BUSTYPE, "MPSA  "},
  104         {UNKNOWN_BUSTYPE, "NUBUS "},
  105         {PCI, "PCI   "},
  106         {UNKNOWN_BUSTYPE, "PCMCIA"},
  107         {UNKNOWN_BUSTYPE, "TC    "},
  108         {UNKNOWN_BUSTYPE, "VL    "},
  109         {UNKNOWN_BUSTYPE, "VME   "},
  110         {UNKNOWN_BUSTYPE, "XPRESS"}
  111 };
  112 
  113 /* From MP spec v1.4, table 5-1. */
  114 static int default_data[7][5] =
  115 {
  116 /*   nbus, id0, type0, id1, type1 */
  117         {1, 0, ISA, 255, NOBUS},
  118         {1, 0, EISA, 255, NOBUS},
  119         {1, 0, EISA, 255, NOBUS},
  120         {1, 0, MCA, 255, NOBUS},
  121         {2, 0, ISA, 1, PCI},
  122         {2, 0, EISA, 1, PCI},
  123         {2, 0, MCA, 1, PCI}
  124 };
  125 
  126 struct pci_probe_table_args {
  127         u_char bus;
  128         u_char found;
  129 };
  130 
  131 struct pci_route_interrupt_args {
  132         u_char bus;             /* Source bus. */
  133         u_char irq;             /* Source slot:pin. */
  134         int vector;             /* Return value. */
  135 };
  136 
  137 static mpfps_t mpfps;
  138 static mpcth_t mpct;
  139 static void *ioapics[MAX_APIC_ID + 1];
  140 static bus_datum *busses;
  141 static int mptable_nioapics, mptable_nbusses, mptable_maxbusid;
  142 static int pci0 = -1;
  143 
  144 static MALLOC_DEFINE(M_MPTABLE, "mptable", "MP Table Items");
  145 
  146 static enum intr_polarity conforming_polarity(u_char src_bus,
  147             u_char src_bus_irq);
  148 static enum intr_trigger conforming_trigger(u_char src_bus, u_char src_bus_irq);
  149 static enum intr_polarity intentry_polarity(int_entry_ptr intr);
  150 static enum intr_trigger intentry_trigger(int_entry_ptr intr);
  151 static int      lookup_bus_type(char *name);
  152 static void     mptable_count_items(void);
  153 static void     mptable_count_items_handler(u_char *entry, void *arg);
  154 #ifdef MPTABLE_FORCE_HTT
  155 static void     mptable_hyperthread_fixup(u_long id_mask);
  156 #endif
  157 static void     mptable_parse_apics_and_busses(void);
  158 static void     mptable_parse_apics_and_busses_handler(u_char *entry,
  159     void *arg);
  160 static void     mptable_parse_default_config_ints(void);
  161 static void     mptable_parse_ints(void);
  162 static void     mptable_parse_ints_handler(u_char *entry, void *arg);
  163 static void     mptable_parse_io_int(int_entry_ptr intr);
  164 static void     mptable_parse_local_int(int_entry_ptr intr);
  165 static void     mptable_pci_probe_table_handler(u_char *entry, void *arg);
  166 static void     mptable_pci_route_interrupt_handler(u_char *entry, void *arg);
  167 static void     mptable_pci_setup(void);
  168 static int      mptable_probe(void);
  169 static int      mptable_probe_cpus(void);
  170 static void     mptable_probe_cpus_handler(u_char *entry, void *arg __unused);
  171 static void     mptable_register(void *dummy);
  172 static int      mptable_setup_local(void);
  173 static int      mptable_setup_io(void);
  174 static void     mptable_walk_table(mptable_entry_handler *handler, void *arg);
  175 static int      search_for_sig(u_int32_t target, int count);
  176 
  177 static struct apic_enumerator mptable_enumerator = {
  178         "MPTable",
  179         mptable_probe,
  180         mptable_probe_cpus,
  181         mptable_setup_local,
  182         mptable_setup_io
  183 };
  184 
  185 /*
  186  * look for the MP spec signature
  187  */
  188 
  189 static int
  190 search_for_sig(u_int32_t target, int count)
  191 {
  192         int     x;
  193         u_int32_t *addr = (u_int32_t *) (KERNBASE + target);
  194 
  195         for (x = 0; x < count; x += 4)
  196                 if (addr[x] == MP_SIG)
  197                         /* make array index a byte index */
  198                         return (target + (x * sizeof(u_int32_t)));
  199         return (-1);
  200 }
  201 
  202 static int
  203 lookup_bus_type(char *name)
  204 {
  205         int     x;
  206 
  207         for (x = 0; x < MAX_BUSTYPE; ++x)
  208                 if (strncmp(bus_type_table[x].name, name, 6) == 0)
  209                         return (bus_type_table[x].type);
  210 
  211         return (UNKNOWN_BUSTYPE);
  212 }
  213 
  214 /*
  215  * Look for an Intel MP spec table (ie, SMP capable hardware).
  216  */
  217 static int
  218 mptable_probe(void)
  219 {
  220         int     x;
  221         u_int32_t segment;
  222         u_int32_t target;
  223 
  224         /* see if EBDA exists */
  225         segment = (u_int32_t) *(u_short *)(KERNBASE + 0x40e);
  226         if (segment != 0) {
  227                 /* search first 1K of EBDA */
  228                 target = (u_int32_t) (segment << 4);
  229                 if ((x = search_for_sig(target, 1024 / 4)) >= 0)
  230                         goto found;
  231         } else {
  232                 /* last 1K of base memory, effective 'top of base' passed in */
  233                 target = (u_int32_t) ((basemem * 1024) - 0x400);
  234                 if ((x = search_for_sig(target, 1024 / 4)) >= 0)
  235                         goto found;
  236         }
  237 
  238         /* search the BIOS */
  239         target = (u_int32_t) BIOS_BASE;
  240         if ((x = search_for_sig(target, BIOS_COUNT)) >= 0)
  241                 goto found;
  242 
  243         /* nothing found */
  244         return (ENXIO);
  245 
  246 found:
  247         mpfps = (mpfps_t)(KERNBASE + x);
  248 
  249         /* Map in the configuration table if it exists. */
  250         if (mpfps->config_type != 0) {
  251                 if (bootverbose)
  252                         printf(
  253                 "MP Table version 1.%d found using Default Configuration %d\n",
  254                             mpfps->spec_rev, mpfps->config_type);
  255                 if (mpfps->config_type != 5 && mpfps->config_type != 6) {
  256                         printf(
  257                         "MP Table Default Configuration %d is unsupported\n",
  258                             mpfps->config_type);
  259                         return (ENXIO);
  260                 }
  261                 mpct = NULL;
  262         } else {
  263                 if ((uintptr_t)mpfps->pap >= 1024 * 1024) {
  264                         printf("%s: Unable to map MP Configuration Table\n",
  265                             __func__);
  266                         return (ENXIO);
  267                 }
  268                 mpct = (mpcth_t)(KERNBASE + (uintptr_t)mpfps->pap);
  269                 if (mpct->base_table_length + (uintptr_t)mpfps->pap >=
  270                     1024 * 1024) {
  271                         printf("%s: Unable to map end of MP Config Table\n",
  272                             __func__);
  273                         return (ENXIO);
  274                 }
  275                 if (mpct->signature[0] != 'P' || mpct->signature[1] != 'C' ||
  276                     mpct->signature[2] != 'M' || mpct->signature[3] != 'P') {
  277                         printf("%s: MP Config Table has bad signature: %c%c%c%c\n",
  278                             __func__, mpct->signature[0], mpct->signature[1],
  279                             mpct->signature[2], mpct->signature[3]);
  280                         return (ENXIO);
  281                 }
  282                 if (bootverbose)
  283                         printf(
  284                         "MP Configuration Table version 1.%d found at %p\n",
  285                             mpct->spec_rev, mpct);
  286         }
  287 
  288         return (-100);
  289 }
  290 
  291 /*
  292  * Run through the MP table enumerating CPUs.
  293  */
  294 static int
  295 mptable_probe_cpus(void)
  296 {
  297         u_long cpu_mask;
  298 
  299         /* Is this a pre-defined config? */
  300         if (mpfps->config_type != 0) {
  301                 lapic_create(0, 1);
  302                 lapic_create(1, 0);
  303         } else {
  304                 cpu_mask = 0;
  305                 mptable_walk_table(mptable_probe_cpus_handler, &cpu_mask);
  306 #ifdef MPTABLE_FORCE_HTT
  307                 mptable_hyperthread_fixup(cpu_mask);
  308 #endif
  309         }
  310         return (0);
  311 }
  312 
  313 /*
  314  * Initialize the local APIC on the BSP.
  315  */
  316 static int
  317 mptable_setup_local(void)
  318 {
  319         vm_paddr_t addr;
  320 
  321         /* Is this a pre-defined config? */
  322         printf("MPTable: <");
  323         if (mpfps->config_type != 0) {
  324                 addr = DEFAULT_APIC_BASE;
  325                 printf("Default Configuration %d", mpfps->config_type);
  326         } else {
  327                 addr = mpct->apic_address;
  328                 printf("%.*s %.*s", (int)sizeof(mpct->oem_id), mpct->oem_id,
  329                     (int)sizeof(mpct->product_id), mpct->product_id);
  330         }
  331         printf(">\n");
  332         lapic_init(addr);
  333         return (0);
  334 }
  335 
  336 /*
  337  * Run through the MP table enumerating I/O APICs.
  338  */
  339 static int
  340 mptable_setup_io(void)
  341 {
  342         int i;
  343         u_char byte;
  344 
  345         /* First, we count individual items and allocate arrays. */
  346         mptable_count_items();
  347         busses = malloc((mptable_maxbusid + 1) * sizeof(bus_datum), M_MPTABLE,
  348             M_WAITOK);
  349         for (i = 0; i <= mptable_maxbusid; i++)
  350                 busses[i].bus_type = NOBUS;
  351 
  352         /* Second, we run through adding I/O APIC's and busses. */
  353         mptable_parse_apics_and_busses();       
  354 
  355         /* Third, we run through the table tweaking interrupt sources. */
  356         mptable_parse_ints();
  357 
  358         /* Fourth, we register all the I/O APIC's. */
  359         for (i = 0; i <= MAX_APIC_ID; i++)
  360                 if (ioapics[i] != NULL)
  361                         ioapic_register(ioapics[i]);
  362 
  363         /* Fifth, we setup data structures to handle PCI interrupt routing. */
  364         mptable_pci_setup();
  365 
  366         /* Finally, we throw the switch to enable the I/O APIC's. */
  367         if (mpfps->mpfb2 & MPFB2_IMCR_PRESENT) {
  368                 outb(0x22, 0x70);       /* select IMCR */
  369                 byte = inb(0x23);       /* current contents */
  370                 byte |= 0x01;           /* mask external INTR */
  371                 outb(0x23, byte);       /* disconnect 8259s/NMI */
  372         }
  373 
  374         return (0);
  375 }
  376 
  377 static void
  378 mptable_register(void *dummy __unused)
  379 {
  380 
  381         apic_register_enumerator(&mptable_enumerator);
  382 }
  383 SYSINIT(mptable_register, SI_SUB_TUNABLES - 1, SI_ORDER_FIRST,
  384     mptable_register, NULL);
  385 
  386 /*
  387  * Call the handler routine for each entry in the MP config table.
  388  */
  389 static void
  390 mptable_walk_table(mptable_entry_handler *handler, void *arg)
  391 {
  392         u_int i;
  393         u_char *entry;
  394 
  395         entry = (u_char *)(mpct + 1);
  396         for (i = 0; i < mpct->entry_count; i++) {
  397                 switch (*entry) {
  398                 case MPCT_ENTRY_PROCESSOR:
  399                 case MPCT_ENTRY_IOAPIC:
  400                 case MPCT_ENTRY_BUS:
  401                 case MPCT_ENTRY_INT:
  402                 case MPCT_ENTRY_LOCAL_INT:
  403                         break;
  404                 default:
  405                         panic("%s: Unknown MP Config Entry %d\n", __func__,
  406                             (int)*entry);
  407                 }
  408                 handler(entry, arg);
  409                 entry += basetable_entry_types[*entry].length;
  410         }
  411 }
  412 
  413 static void
  414 mptable_probe_cpus_handler(u_char *entry, void *arg)
  415 {
  416         proc_entry_ptr proc;
  417         u_long *cpu_mask;
  418 
  419         switch (*entry) {
  420         case MPCT_ENTRY_PROCESSOR:
  421                 proc = (proc_entry_ptr)entry;
  422                 if (proc->cpu_flags & PROCENTRY_FLAG_EN) {
  423                         lapic_create(proc->apic_id, proc->cpu_flags &
  424                             PROCENTRY_FLAG_BP);
  425                         if (proc->apic_id < MAX_LAPIC_ID) {
  426                                 cpu_mask = (u_long *)arg;
  427                                 *cpu_mask |= (1ul << proc->apic_id);
  428                         }
  429                 }
  430                 break;
  431         }
  432 }
  433 
  434 static void
  435 mptable_count_items_handler(u_char *entry, void *arg __unused)
  436 {
  437         io_apic_entry_ptr apic;
  438         bus_entry_ptr bus;
  439 
  440         switch (*entry) {
  441         case MPCT_ENTRY_BUS:
  442                 bus = (bus_entry_ptr)entry;
  443                 mptable_nbusses++;
  444                 if (bus->bus_id > mptable_maxbusid)
  445                         mptable_maxbusid = bus->bus_id;
  446                 break;
  447         case MPCT_ENTRY_IOAPIC:
  448                 apic = (io_apic_entry_ptr)entry;
  449                 if (apic->apic_flags & IOAPICENTRY_FLAG_EN)
  450                         mptable_nioapics++;
  451                 break;
  452         }
  453 }
  454 
  455 /*
  456  * Count items in the table.
  457  */
  458 static void
  459 mptable_count_items(void)
  460 {
  461 
  462         /* Is this a pre-defined config? */
  463         if (mpfps->config_type != 0) {
  464                 mptable_nioapics = 1;
  465                 switch (mpfps->config_type) {
  466                 case 1:
  467                 case 2:
  468                 case 3:
  469                 case 4:
  470                         mptable_nbusses = 1;
  471                         break;
  472                 case 5:
  473                 case 6:
  474                 case 7:
  475                         mptable_nbusses = 2;
  476                         break;
  477                 default:
  478                         panic("Unknown pre-defined MP Table config type %d",
  479                             mpfps->config_type);
  480                 }
  481                 mptable_maxbusid = mptable_nbusses - 1;
  482         } else
  483                 mptable_walk_table(mptable_count_items_handler, NULL);
  484 }
  485 
  486 /*
  487  * Add a bus or I/O APIC from an entry in the table.
  488  */
  489 static void
  490 mptable_parse_apics_and_busses_handler(u_char *entry, void *arg __unused)
  491 {
  492         io_apic_entry_ptr apic;
  493         bus_entry_ptr bus;
  494         enum busTypes bus_type;
  495         int i;
  496 
  497 
  498         switch (*entry) {
  499         case MPCT_ENTRY_BUS:
  500                 bus = (bus_entry_ptr)entry;
  501                 bus_type = lookup_bus_type(bus->bus_type);
  502                 if (bus_type == UNKNOWN_BUSTYPE) {
  503                         printf("MPTable: Unknown bus %d type \"", bus->bus_id);
  504                         for (i = 0; i < 6; i++)
  505                                 printf("%c", bus->bus_type[i]);
  506                         printf("\"\n");
  507                 }
  508                 busses[bus->bus_id].bus_id = bus->bus_id;
  509                 busses[bus->bus_id].bus_type = bus_type;
  510                 break;
  511         case MPCT_ENTRY_IOAPIC:
  512                 apic = (io_apic_entry_ptr)entry;
  513                 if (!(apic->apic_flags & IOAPICENTRY_FLAG_EN))
  514                         break;
  515                 if (apic->apic_id > MAX_APIC_ID)
  516                         panic("%s: I/O APIC ID %d too high", __func__,
  517                             apic->apic_id);
  518                 if (ioapics[apic->apic_id] != NULL)
  519                         panic("%s: Double APIC ID %d", __func__,
  520                             apic->apic_id);
  521                 ioapics[apic->apic_id] = ioapic_create(apic->apic_address,
  522                     apic->apic_id, -1);
  523                 break;
  524         default:
  525                 break;
  526         }
  527 }
  528 
  529 /*
  530  * Enumerate I/O APIC's and busses.
  531  */
  532 static void
  533 mptable_parse_apics_and_busses(void)
  534 {
  535 
  536         /* Is this a pre-defined config? */
  537         if (mpfps->config_type != 0) {
  538                 ioapics[2] = ioapic_create(DEFAULT_IO_APIC_BASE, 2, 0);
  539                 busses[0].bus_id = 0;
  540                 busses[0].bus_type = default_data[mpfps->config_type - 1][2];
  541                 if (mptable_nbusses > 1) {
  542                         busses[1].bus_id = 1;
  543                         busses[1].bus_type =
  544                             default_data[mpfps->config_type - 1][4];
  545                 }
  546         } else
  547                 mptable_walk_table(mptable_parse_apics_and_busses_handler,
  548                     NULL);
  549 }
  550 
  551 /*
  552  * Determine conforming polarity for a given bus type.
  553  */
  554 static enum intr_polarity
  555 conforming_polarity(u_char src_bus, u_char src_bus_irq)
  556 {
  557 
  558         KASSERT(src_bus <= mptable_maxbusid, ("bus id %d too large", src_bus));
  559         switch (busses[src_bus].bus_type) {
  560         case ISA:
  561         case EISA:
  562                 return (INTR_POLARITY_HIGH);
  563         case PCI:
  564                 return (INTR_POLARITY_LOW);
  565         default:
  566                 panic("%s: unknown bus type %d", __func__,
  567                     busses[src_bus].bus_type);
  568         }
  569 }
  570 
  571 /*
  572  * Determine conforming trigger for a given bus type.
  573  */
  574 static enum intr_trigger
  575 conforming_trigger(u_char src_bus, u_char src_bus_irq)
  576 {
  577 
  578         KASSERT(src_bus <= mptable_maxbusid, ("bus id %d too large", src_bus));
  579         switch (busses[src_bus].bus_type) {
  580         case ISA:
  581                 if (elcr_found)
  582                         return (elcr_read_trigger(src_bus_irq));
  583                 else
  584                         return (INTR_TRIGGER_EDGE);
  585         case PCI:
  586                 return (INTR_TRIGGER_LEVEL);
  587         case EISA:
  588                 KASSERT(src_bus_irq < 16, ("Invalid EISA IRQ %d", src_bus_irq));
  589                 KASSERT(elcr_found, ("Missing ELCR"));
  590                 return (elcr_read_trigger(src_bus_irq));
  591         default:
  592                 panic("%s: unknown bus type %d", __func__,
  593                     busses[src_bus].bus_type);
  594         }
  595 }
  596 
  597 static enum intr_polarity
  598 intentry_polarity(int_entry_ptr intr)
  599 {
  600 
  601         switch (intr->int_flags & INTENTRY_FLAGS_POLARITY) {
  602         case INTENTRY_FLAGS_POLARITY_CONFORM:
  603                 return (conforming_polarity(intr->src_bus_id,
  604                             intr->src_bus_irq));
  605         case INTENTRY_FLAGS_POLARITY_ACTIVEHI:
  606                 return (INTR_POLARITY_HIGH);
  607         case INTENTRY_FLAGS_POLARITY_ACTIVELO:
  608                 return (INTR_POLARITY_LOW);
  609         default:
  610                 panic("Bogus interrupt flags");
  611         }
  612 }
  613 
  614 static enum intr_trigger
  615 intentry_trigger(int_entry_ptr intr)
  616 {
  617 
  618         switch (intr->int_flags & INTENTRY_FLAGS_TRIGGER) {
  619         case INTENTRY_FLAGS_TRIGGER_CONFORM:
  620                 return (conforming_trigger(intr->src_bus_id,
  621                             intr->src_bus_irq));
  622         case INTENTRY_FLAGS_TRIGGER_EDGE:
  623                 return (INTR_TRIGGER_EDGE);
  624         case INTENTRY_FLAGS_TRIGGER_LEVEL:
  625                 return (INTR_TRIGGER_LEVEL);
  626         default:
  627                 panic("Bogus interrupt flags");
  628         }
  629 }
  630 
  631 /*
  632  * Parse an interrupt entry for an I/O interrupt routed to a pin on an I/O APIC.
  633  */
  634 static void
  635 mptable_parse_io_int(int_entry_ptr intr)
  636 {
  637         void *ioapic;
  638         u_int pin, apic_id;
  639 
  640         apic_id = intr->dst_apic_id;
  641         if (intr->dst_apic_id == 0xff) {
  642                 /*
  643                  * An APIC ID of 0xff means that the interrupt is connected
  644                  * to the specified pin on all I/O APICs in the system.  If
  645                  * there is only one I/O APIC, then use that APIC to route
  646                  * the interrupts.  If there is more than one I/O APIC, then
  647                  * punt.
  648                  */
  649                 if (mptable_nioapics == 1) {
  650                         apic_id = 0;
  651                         while (ioapics[apic_id] == NULL)
  652                                 apic_id++;
  653                 } else {
  654                         printf(
  655                         "MPTable: Ignoring global interrupt entry for pin %d\n",
  656                             intr->dst_apic_int);
  657                         return;
  658                 }
  659         }
  660         if (apic_id > MAX_APIC_ID) {
  661                 printf("MPTable: Ignoring interrupt entry for ioapic%d\n",
  662                     intr->dst_apic_id);
  663                 return;
  664         }
  665         ioapic = ioapics[apic_id];
  666         if (ioapic == NULL) {
  667                 printf(
  668         "MPTable: Ignoring interrupt entry for missing ioapic%d\n",
  669                     apic_id);
  670                 return;
  671         }
  672         pin = intr->dst_apic_int;
  673         switch (intr->int_type) {
  674         case INTENTRY_TYPE_INT:
  675                 switch (busses[intr->src_bus_id].bus_type) {
  676                 case NOBUS:
  677                         panic("interrupt from missing bus");
  678                 case ISA:
  679                 case EISA:
  680                         if (busses[intr->src_bus_id].bus_type == ISA)
  681                                 ioapic_set_bus(ioapic, pin, APIC_BUS_ISA);
  682                         else
  683                                 ioapic_set_bus(ioapic, pin, APIC_BUS_EISA);
  684                         if (intr->src_bus_irq == pin)
  685                                 break;
  686                         ioapic_remap_vector(ioapic, pin, intr->src_bus_irq);
  687                         if (ioapic_get_vector(ioapic, intr->src_bus_irq) ==
  688                             intr->src_bus_irq)
  689                                 ioapic_disable_pin(ioapic, intr->src_bus_irq);
  690                         break;
  691                 case PCI:
  692                         ioapic_set_bus(ioapic, pin, APIC_BUS_PCI);
  693                         break;
  694                 default:
  695                         ioapic_set_bus(ioapic, pin, APIC_BUS_UNKNOWN);
  696                         break;
  697                 }
  698                 break;
  699         case INTENTRY_TYPE_NMI:
  700                 ioapic_set_nmi(ioapic, pin);
  701                 break;
  702         case INTENTRY_TYPE_SMI:
  703                 ioapic_set_smi(ioapic, pin);
  704                 break;
  705         case INTENTRY_TYPE_EXTINT:
  706                 ioapic_set_extint(ioapic, pin);
  707                 break;
  708         default:
  709                 panic("%s: invalid interrupt entry type %d\n", __func__,
  710                     intr->int_type);
  711         }
  712         if (intr->int_type == INTENTRY_TYPE_INT ||
  713             (intr->int_flags & INTENTRY_FLAGS_TRIGGER) !=
  714             INTENTRY_FLAGS_TRIGGER_CONFORM)
  715                 ioapic_set_triggermode(ioapic, pin, intentry_trigger(intr));
  716         if (intr->int_type == INTENTRY_TYPE_INT ||
  717             (intr->int_flags & INTENTRY_FLAGS_POLARITY) !=
  718             INTENTRY_FLAGS_POLARITY_CONFORM)
  719                 ioapic_set_polarity(ioapic, pin, intentry_polarity(intr));
  720 }
  721 
  722 /*
  723  * Parse an interrupt entry for a local APIC LVT pin.
  724  */
  725 static void
  726 mptable_parse_local_int(int_entry_ptr intr)
  727 {
  728         u_int apic_id, pin;
  729 
  730         if (intr->dst_apic_id == 0xff)
  731                 apic_id = APIC_ID_ALL;
  732         else
  733                 apic_id = intr->dst_apic_id;
  734         if (intr->dst_apic_int == 0)
  735                 pin = LVT_LINT0;
  736         else
  737                 pin = LVT_LINT1;
  738         switch (intr->int_type) {
  739         case INTENTRY_TYPE_INT:
  740 #if 1
  741                 printf(
  742         "MPTable: Ignoring vectored local interrupt for LINTIN%d vector %d\n",
  743                     intr->dst_apic_int, intr->src_bus_irq);
  744                 return;
  745 #else
  746                 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_FIXED);
  747                 break;
  748 #endif
  749         case INTENTRY_TYPE_NMI:
  750                 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI);
  751                 break;
  752         case INTENTRY_TYPE_SMI:
  753                 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_SMI);
  754                 break;
  755         case INTENTRY_TYPE_EXTINT:
  756                 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_EXTINT);
  757                 break;
  758         default:
  759                 panic("%s: invalid interrupt entry type %d\n", __func__,
  760                     intr->int_type);
  761         }
  762         if ((intr->int_flags & INTENTRY_FLAGS_TRIGGER) !=
  763             INTENTRY_FLAGS_TRIGGER_CONFORM)
  764                 lapic_set_lvt_triggermode(apic_id, pin,
  765                     intentry_trigger(intr));
  766         if ((intr->int_flags & INTENTRY_FLAGS_POLARITY) !=
  767             INTENTRY_FLAGS_POLARITY_CONFORM)
  768                 lapic_set_lvt_polarity(apic_id, pin, intentry_polarity(intr));
  769 }
  770 
  771 /*
  772  * Parse interrupt entries.
  773  */
  774 static void
  775 mptable_parse_ints_handler(u_char *entry, void *arg __unused)
  776 {
  777         int_entry_ptr intr;
  778 
  779         intr = (int_entry_ptr)entry;
  780         switch (*entry) {
  781         case MPCT_ENTRY_INT:
  782                 mptable_parse_io_int(intr);
  783                 break;
  784         case MPCT_ENTRY_LOCAL_INT:
  785                 mptable_parse_local_int(intr);
  786                 break;
  787         }
  788 }
  789 
  790 /*
  791  * Configure interrupt pins for a default configuration.  For details see
  792  * Table 5-2 in Section 5 of the MP Table specification.
  793  */
  794 static void
  795 mptable_parse_default_config_ints(void)
  796 {
  797         struct INTENTRY entry;
  798         int pin;
  799 
  800         /*
  801          * All default configs route IRQs from bus 0 to the first 16 pins
  802          * of the first I/O APIC with an APIC ID of 2.
  803          */
  804         entry.type = MPCT_ENTRY_INT;
  805         entry.int_flags = INTENTRY_FLAGS_POLARITY_CONFORM |
  806             INTENTRY_FLAGS_TRIGGER_CONFORM;
  807         entry.src_bus_id = 0;
  808         entry.dst_apic_id = 2;
  809 
  810         /* Run through all 16 pins. */
  811         for (pin = 0; pin < 16; pin++) {
  812                 entry.dst_apic_int = pin;
  813                 switch (pin) {
  814                 case 0:
  815                         /* Pin 0 is an ExtINT pin. */
  816                         entry.int_type = INTENTRY_TYPE_EXTINT;
  817                         break;
  818                 case 2:
  819                         /* IRQ 0 is routed to pin 2. */
  820                         entry.int_type = INTENTRY_TYPE_INT;
  821                         entry.src_bus_irq = 0;
  822                         break;
  823                 default:
  824                         /* All other pins are identity mapped. */
  825                         entry.int_type = INTENTRY_TYPE_INT;
  826                         entry.src_bus_irq = pin;
  827                         break;
  828                 }
  829                 mptable_parse_io_int(&entry);
  830         }
  831 
  832         /* Certain configs disable certain pins. */
  833         if (mpfps->config_type == 7)
  834                 ioapic_disable_pin(ioapics[2], 0);
  835         if (mpfps->config_type == 2) {
  836                 ioapic_disable_pin(ioapics[2], 2);
  837                 ioapic_disable_pin(ioapics[2], 13);
  838         }
  839 }
  840 
  841 /*
  842  * Configure the interrupt pins
  843  */
  844 static void
  845 mptable_parse_ints(void)
  846 {
  847 
  848         /* Is this a pre-defined config? */
  849         if (mpfps->config_type != 0) {
  850                 /* Configure LINT pins. */
  851                 lapic_set_lvt_mode(APIC_ID_ALL, LVT_LINT0, APIC_LVT_DM_EXTINT);
  852                 lapic_set_lvt_mode(APIC_ID_ALL, LVT_LINT1, APIC_LVT_DM_NMI);
  853 
  854                 /* Configure I/O APIC pins. */
  855                 mptable_parse_default_config_ints();
  856         } else
  857                 mptable_walk_table(mptable_parse_ints_handler, NULL);
  858 }
  859 
  860 #ifdef MPTABLE_FORCE_HTT
  861 /*
  862  * Perform a hyperthreading "fix-up" to enumerate any logical CPU's
  863  * that aren't already listed in the table.
  864  *
  865  * XXX: We assume that all of the physical CPUs in the
  866  * system have the same number of logical CPUs.
  867  *
  868  * XXX: We assume that APIC ID's are allocated such that
  869  * the APIC ID's for a physical processor are aligned
  870  * with the number of logical CPU's in the processor.
  871  */
  872 static void
  873 mptable_hyperthread_fixup(u_long id_mask)
  874 {
  875         u_int i, id, logical_cpus;
  876 
  877         /* Nothing to do if there is no HTT support. */
  878         if ((cpu_feature & CPUID_HTT) == 0)
  879                 return;
  880         logical_cpus = (cpu_procinfo & CPUID_HTT_CORES) >> 16;
  881         if (logical_cpus <= 1)
  882                 return;
  883 
  884         /*
  885          * For each APIC ID of a CPU that is set in the mask,
  886          * scan the other candidate APIC ID's for this
  887          * physical processor.  If any of those ID's are
  888          * already in the table, then kill the fixup.
  889          */
  890         for (id = 0; id <= MAX_LAPIC_ID; id++) {
  891                 if ((id_mask & 1 << id) == 0)
  892                         continue;
  893                 /* First, make sure we are on a logical_cpus boundary. */
  894                 if (id % logical_cpus != 0)
  895                         return;
  896                 for (i = id + 1; i < id + logical_cpus; i++)
  897                         if ((id_mask & 1 << i) != 0)
  898                                 return;
  899         }
  900 
  901         /*
  902          * Ok, the ID's checked out, so perform the fixup by
  903          * adding the logical CPUs.
  904          */
  905         while ((id = ffsl(id_mask)) != 0) {
  906                 id--;
  907                 for (i = id + 1; i < id + logical_cpus; i++) {
  908                         if (bootverbose)
  909                                 printf(
  910                         "MPTable: Adding logical CPU %d from main CPU %d\n",
  911                                     i, id);
  912                         lapic_create(i, 0);
  913                 }
  914                 id_mask &= ~(1 << id);
  915         }
  916 }
  917 #endif /* MPTABLE_FORCE_HTT */
  918 
  919 /*
  920  * Support code for routing PCI interrupts using the MP Table.
  921  */
  922 static void
  923 mptable_pci_setup(void)
  924 {
  925         int i;
  926 
  927         /*
  928          * Find the first pci bus and call it 0.  Panic if pci0 is not
  929          * bus zero and there are multiple PCI busses.
  930          */
  931         for (i = 0; i <= mptable_maxbusid; i++)
  932                 if (busses[i].bus_type == PCI) {
  933                         if (pci0 == -1)
  934                                 pci0 = i;
  935                         else if (pci0 != 0)
  936                                 panic(
  937                 "MPTable contains multiple PCI busses but no PCI bus 0");
  938                 }
  939 }
  940 
  941 static void
  942 mptable_pci_probe_table_handler(u_char *entry, void *arg)
  943 {
  944         struct pci_probe_table_args *args;
  945         int_entry_ptr intr;
  946 
  947         if (*entry != MPCT_ENTRY_INT)
  948                 return;
  949         intr = (int_entry_ptr)entry;
  950         args = (struct pci_probe_table_args *)arg;
  951         KASSERT(args->bus <= mptable_maxbusid,
  952             ("bus %d is too big", args->bus));
  953         KASSERT(busses[args->bus].bus_type == PCI, ("probing for non-PCI bus"));
  954         if (intr->src_bus_id == args->bus)
  955                 args->found = 1;
  956 }
  957 
  958 int
  959 mptable_pci_probe_table(int bus)
  960 {
  961         struct pci_probe_table_args args;
  962 
  963         if (bus < 0)
  964                 return (EINVAL);
  965         if (mpct == NULL || pci0 == -1 || pci0 + bus > mptable_maxbusid)
  966                 return (ENXIO);
  967         if (busses[pci0 + bus].bus_type != PCI)
  968                 return (ENXIO);
  969         args.bus = pci0 + bus;
  970         args.found = 0;
  971         mptable_walk_table(mptable_pci_probe_table_handler, &args);
  972         if (args.found == 0)
  973                 return (ENXIO);
  974         return (0);
  975 }
  976 
  977 static void
  978 mptable_pci_route_interrupt_handler(u_char *entry, void *arg)
  979 {
  980         struct pci_route_interrupt_args *args;
  981         int_entry_ptr intr;
  982         int vector;
  983 
  984         if (*entry != MPCT_ENTRY_INT)
  985                 return;
  986         intr = (int_entry_ptr)entry;
  987         args = (struct pci_route_interrupt_args *)arg;
  988         if (intr->src_bus_id != args->bus || intr->src_bus_irq != args->irq)
  989                 return;
  990 
  991         /* Make sure the APIC maps to a known APIC. */
  992         KASSERT(ioapics[intr->dst_apic_id] != NULL,
  993             ("No I/O APIC %d to route interrupt to", intr->dst_apic_id));
  994 
  995         /*
  996          * Look up the vector for this APIC / pin combination.  If we
  997          * have previously matched an entry for this PCI IRQ but it
  998          * has the same vector as this entry, just return.  Otherwise,
  999          * we use the vector for this APIC / pin combination.
 1000          */
 1001         vector = ioapic_get_vector(ioapics[intr->dst_apic_id],
 1002             intr->dst_apic_int);
 1003         if (args->vector == vector)
 1004                 return;
 1005         KASSERT(args->vector == -1,
 1006             ("Multiple IRQs for PCI interrupt %d.%d.INT%c: %d and %d\n",
 1007             args->bus, args->irq >> 2, 'A' + (args->irq & 0x3), args->vector,
 1008             vector));
 1009         args->vector = vector;
 1010 }
 1011 
 1012 int
 1013 mptable_pci_route_interrupt(device_t pcib, device_t dev, int pin)
 1014 {
 1015         struct pci_route_interrupt_args args;
 1016         int slot;
 1017 
 1018         /* Like ACPI, pin numbers are 0-3, not 1-4. */
 1019         pin--;
 1020         KASSERT(pci0 != -1, ("do not know how to route PCI interrupts"));
 1021         args.bus = pci_get_bus(dev) + pci0;
 1022         slot = pci_get_slot(dev);
 1023 
 1024         /*
 1025          * PCI interrupt entries in the MP Table encode both the slot and
 1026          * pin into the IRQ with the pin being the two least significant
 1027          * bits, the slot being the next five bits, and the most significant
 1028          * bit being reserved.
 1029          */
 1030         args.irq = slot << 2 | pin;
 1031         args.vector = -1;
 1032         mptable_walk_table(mptable_pci_route_interrupt_handler, &args);
 1033         if (args.vector < 0) {
 1034                 device_printf(pcib, "unable to route slot %d INT%c\n", slot,
 1035                     'A' + pin);
 1036                 return (PCI_INVALID_IRQ);
 1037         }
 1038         if (bootverbose)
 1039                 device_printf(pcib, "slot %d INT%c routed to irq %d\n", slot,
 1040                     'A' + pin, args.vector);
 1041         return (args.vector);
 1042 }

Cache object: 05457041a952179f7de7c53c722b0919


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.