1 /*-
2 * Copyright (c) 1982, 1986 The Regents of the University of California.
3 * Copyright (c) 1989, 1990 William Jolitz
4 * Copyright (c) 1994 John Dyson
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to Berkeley by
8 * the Systems Programming Group of the University of Utah Computer
9 * Science Department, and William Jolitz.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the University of
22 * California, Berkeley and its contributors.
23 * 4. Neither the name of the University nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
28 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
31 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
35 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
36 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * SUCH DAMAGE.
38 *
39 * from: @(#)vm_machdep.c 7.3 (Berkeley) 5/13/91
40 * Utah $Hdr: vm_machdep.c 1.16.1.1 89/06/23$
41 */
42
43 #include <sys/cdefs.h>
44 __FBSDID("$FreeBSD: releng/8.3/sys/amd64/amd64/vm_machdep.c 219187 2011-03-02 19:09:49Z jkim $");
45
46 #include "opt_isa.h"
47 #include "opt_cpu.h"
48 #include "opt_compat.h"
49
50 #include <sys/param.h>
51 #include <sys/systm.h>
52 #include <sys/bio.h>
53 #include <sys/buf.h>
54 #include <sys/kernel.h>
55 #include <sys/ktr.h>
56 #include <sys/lock.h>
57 #include <sys/malloc.h>
58 #include <sys/mbuf.h>
59 #include <sys/mutex.h>
60 #include <sys/pioctl.h>
61 #include <sys/proc.h>
62 #include <sys/sf_buf.h>
63 #include <sys/smp.h>
64 #include <sys/sysctl.h>
65 #include <sys/sysent.h>
66 #include <sys/unistd.h>
67 #include <sys/vnode.h>
68 #include <sys/vmmeter.h>
69
70 #include <machine/cpu.h>
71 #include <machine/md_var.h>
72 #include <machine/pcb.h>
73 #include <machine/specialreg.h>
74 #include <machine/tss.h>
75
76 #include <vm/vm.h>
77 #include <vm/vm_extern.h>
78 #include <vm/vm_kern.h>
79 #include <vm/vm_page.h>
80 #include <vm/vm_map.h>
81 #include <vm/vm_param.h>
82
83 #include <amd64/isa/isa.h>
84
85 static void cpu_reset_real(void);
86 #ifdef SMP
87 static void cpu_reset_proxy(void);
88 static u_int cpu_reset_proxyid;
89 static volatile u_int cpu_reset_proxy_active;
90 #endif
91
92 /*
93 * Finish a fork operation, with process p2 nearly set up.
94 * Copy and update the pcb, set up the stack so that the child
95 * ready to run and return to user mode.
96 */
97 void
98 cpu_fork(td1, p2, td2, flags)
99 register struct thread *td1;
100 register struct proc *p2;
101 struct thread *td2;
102 int flags;
103 {
104 register struct proc *p1;
105 struct pcb *pcb2;
106 struct mdproc *mdp1, *mdp2;
107 struct proc_ldt *pldt;
108 pmap_t pmap2;
109
110 p1 = td1->td_proc;
111 if ((flags & RFPROC) == 0) {
112 if ((flags & RFMEM) == 0) {
113 /* unshare user LDT */
114 mdp1 = &p1->p_md;
115 mtx_lock(&dt_lock);
116 if ((pldt = mdp1->md_ldt) != NULL &&
117 pldt->ldt_refcnt > 1 &&
118 user_ldt_alloc(p1, 1) == NULL)
119 panic("could not copy LDT");
120 mtx_unlock(&dt_lock);
121 }
122 return;
123 }
124
125 /* Ensure that td1's pcb is up to date. */
126 fpuexit(td1);
127
128 /* Point the pcb to the top of the stack */
129 pcb2 = (struct pcb *)(td2->td_kstack +
130 td2->td_kstack_pages * PAGE_SIZE) - 1;
131 td2->td_pcb = pcb2;
132
133 /* Copy td1's pcb */
134 bcopy(td1->td_pcb, pcb2, sizeof(*pcb2));
135
136 /* Properly initialize pcb_save */
137 pcb2->pcb_save = &pcb2->pcb_user_save;
138
139 /* Point mdproc and then copy over td1's contents */
140 mdp2 = &p2->p_md;
141 bcopy(&p1->p_md, mdp2, sizeof(*mdp2));
142
143 /*
144 * Create a new fresh stack for the new process.
145 * Copy the trap frame for the return to user mode as if from a
146 * syscall. This copies most of the user mode register values.
147 */
148 td2->td_frame = (struct trapframe *)td2->td_pcb - 1;
149 bcopy(td1->td_frame, td2->td_frame, sizeof(struct trapframe));
150
151 td2->td_frame->tf_rax = 0; /* Child returns zero */
152 td2->td_frame->tf_rflags &= ~PSL_C; /* success */
153 td2->td_frame->tf_rdx = 1;
154
155 /*
156 * If the parent process has the trap bit set (i.e. a debugger had
157 * single stepped the process to the system call), we need to clear
158 * the trap flag from the new frame unless the debugger had set PF_FORK
159 * on the parent. Otherwise, the child will receive a (likely
160 * unexpected) SIGTRAP when it executes the first instruction after
161 * returning to userland.
162 */
163 if ((p1->p_pfsflags & PF_FORK) == 0)
164 td2->td_frame->tf_rflags &= ~PSL_T;
165
166 /*
167 * Set registers for trampoline to user mode. Leave space for the
168 * return address on stack. These are the kernel mode register values.
169 */
170 pmap2 = vmspace_pmap(p2->p_vmspace);
171 pcb2->pcb_cr3 = DMAP_TO_PHYS((vm_offset_t)pmap2->pm_pml4);
172 pcb2->pcb_r12 = (register_t)fork_return; /* fork_trampoline argument */
173 pcb2->pcb_rbp = 0;
174 pcb2->pcb_rsp = (register_t)td2->td_frame - sizeof(void *);
175 pcb2->pcb_rbx = (register_t)td2; /* fork_trampoline argument */
176 pcb2->pcb_rip = (register_t)fork_trampoline;
177 /*-
178 * pcb2->pcb_dr*: cloned above.
179 * pcb2->pcb_savefpu: cloned above.
180 * pcb2->pcb_flags: cloned above.
181 * pcb2->pcb_onfault: cloned above (always NULL here?).
182 * pcb2->pcb_[fg]sbase: cloned above
183 */
184
185 /* Setup to release spin count in fork_exit(). */
186 td2->td_md.md_spinlock_count = 1;
187 td2->td_md.md_saved_flags = PSL_KERNEL | PSL_I;
188
189 /* As an i386, do not copy io permission bitmap. */
190 pcb2->pcb_tssp = NULL;
191
192 /* New segment registers. */
193 set_pcb_flags(pcb2, PCB_FULL_IRET);
194
195 /* Copy the LDT, if necessary. */
196 mdp1 = &td1->td_proc->p_md;
197 mdp2 = &p2->p_md;
198 mtx_lock(&dt_lock);
199 if (mdp1->md_ldt != NULL) {
200 if (flags & RFMEM) {
201 mdp1->md_ldt->ldt_refcnt++;
202 mdp2->md_ldt = mdp1->md_ldt;
203 bcopy(&mdp1->md_ldt_sd, &mdp2->md_ldt_sd, sizeof(struct
204 system_segment_descriptor));
205 } else {
206 mdp2->md_ldt = NULL;
207 mdp2->md_ldt = user_ldt_alloc(p2, 0);
208 if (mdp2->md_ldt == NULL)
209 panic("could not copy LDT");
210 amd64_set_ldt_data(td2, 0, max_ldt_segment,
211 (struct user_segment_descriptor *)
212 mdp1->md_ldt->ldt_base);
213 }
214 } else
215 mdp2->md_ldt = NULL;
216 mtx_unlock(&dt_lock);
217
218 /*
219 * Now, cpu_switch() can schedule the new process.
220 * pcb_rsp is loaded pointing to the cpu_switch() stack frame
221 * containing the return address when exiting cpu_switch.
222 * This will normally be to fork_trampoline(), which will have
223 * %ebx loaded with the new proc's pointer. fork_trampoline()
224 * will set up a stack to call fork_return(p, frame); to complete
225 * the return to user-mode.
226 */
227 }
228
229 /*
230 * Intercept the return address from a freshly forked process that has NOT
231 * been scheduled yet.
232 *
233 * This is needed to make kernel threads stay in kernel mode.
234 */
235 void
236 cpu_set_fork_handler(td, func, arg)
237 struct thread *td;
238 void (*func)(void *);
239 void *arg;
240 {
241 /*
242 * Note that the trap frame follows the args, so the function
243 * is really called like this: func(arg, frame);
244 */
245 td->td_pcb->pcb_r12 = (long) func; /* function */
246 td->td_pcb->pcb_rbx = (long) arg; /* first arg */
247 }
248
249 void
250 cpu_exit(struct thread *td)
251 {
252
253 /*
254 * If this process has a custom LDT, release it.
255 */
256 mtx_lock(&dt_lock);
257 if (td->td_proc->p_md.md_ldt != 0)
258 user_ldt_free(td);
259 else
260 mtx_unlock(&dt_lock);
261 }
262
263 void
264 cpu_thread_exit(struct thread *td)
265 {
266 struct pcb *pcb;
267
268 critical_enter();
269 if (td == PCPU_GET(fpcurthread))
270 fpudrop();
271 critical_exit();
272
273 pcb = td->td_pcb;
274
275 /* Disable any hardware breakpoints. */
276 if (pcb->pcb_flags & PCB_DBREGS) {
277 reset_dbregs();
278 clear_pcb_flags(pcb, PCB_DBREGS);
279 }
280 }
281
282 void
283 cpu_thread_clean(struct thread *td)
284 {
285 struct pcb *pcb;
286
287 pcb = td->td_pcb;
288
289 /*
290 * Clean TSS/iomap
291 */
292 if (pcb->pcb_tssp != NULL) {
293 kmem_free(kernel_map, (vm_offset_t)pcb->pcb_tssp,
294 ctob(IOPAGES + 1));
295 pcb->pcb_tssp = NULL;
296 }
297 }
298
299 void
300 cpu_thread_swapin(struct thread *td)
301 {
302 }
303
304 void
305 cpu_thread_swapout(struct thread *td)
306 {
307 }
308
309 void
310 cpu_thread_alloc(struct thread *td)
311 {
312
313 td->td_pcb = (struct pcb *)(td->td_kstack +
314 td->td_kstack_pages * PAGE_SIZE) - 1;
315 td->td_frame = (struct trapframe *)td->td_pcb - 1;
316 td->td_pcb->pcb_save = &td->td_pcb->pcb_user_save;
317 }
318
319 void
320 cpu_thread_free(struct thread *td)
321 {
322
323 cpu_thread_clean(td);
324 }
325
326 void
327 cpu_set_syscall_retval(struct thread *td, int error)
328 {
329
330 switch (error) {
331 case 0:
332 td->td_frame->tf_rax = td->td_retval[0];
333 td->td_frame->tf_rdx = td->td_retval[1];
334 td->td_frame->tf_rflags &= ~PSL_C;
335 break;
336
337 case ERESTART:
338 /*
339 * Reconstruct pc, we know that 'syscall' is 2 bytes,
340 * lcall $X,y is 7 bytes, int 0x80 is 2 bytes.
341 * We saved this in tf_err.
342 * %r10 (which was holding the value of %rcx) is restored
343 * for the next iteration.
344 * %r10 restore is only required for freebsd/amd64 processes,
345 * but shall be innocent for any ia32 ABI.
346 */
347 td->td_frame->tf_rip -= td->td_frame->tf_err;
348 td->td_frame->tf_r10 = td->td_frame->tf_rcx;
349 break;
350
351 case EJUSTRETURN:
352 break;
353
354 default:
355 if (td->td_proc->p_sysent->sv_errsize) {
356 if (error >= td->td_proc->p_sysent->sv_errsize)
357 error = -1; /* XXX */
358 else
359 error = td->td_proc->p_sysent->sv_errtbl[error];
360 }
361 td->td_frame->tf_rax = error;
362 td->td_frame->tf_rflags |= PSL_C;
363 break;
364 }
365 }
366
367 /*
368 * Initialize machine state (pcb and trap frame) for a new thread about to
369 * upcall. Put enough state in the new thread's PCB to get it to go back
370 * userret(), where we can intercept it again to set the return (upcall)
371 * Address and stack, along with those from upcals that are from other sources
372 * such as those generated in thread_userret() itself.
373 */
374 void
375 cpu_set_upcall(struct thread *td, struct thread *td0)
376 {
377 struct pcb *pcb2;
378
379 /* Point the pcb to the top of the stack. */
380 pcb2 = td->td_pcb;
381
382 /*
383 * Copy the upcall pcb. This loads kernel regs.
384 * Those not loaded individually below get their default
385 * values here.
386 */
387 bcopy(td0->td_pcb, pcb2, sizeof(*pcb2));
388 clear_pcb_flags(pcb2, PCB_FPUINITDONE | PCB_USERFPUINITDONE);
389 pcb2->pcb_save = &pcb2->pcb_user_save;
390 set_pcb_flags(pcb2, PCB_FULL_IRET);
391
392 /*
393 * Create a new fresh stack for the new thread.
394 */
395 bcopy(td0->td_frame, td->td_frame, sizeof(struct trapframe));
396
397 /* If the current thread has the trap bit set (i.e. a debugger had
398 * single stepped the process to the system call), we need to clear
399 * the trap flag from the new frame. Otherwise, the new thread will
400 * receive a (likely unexpected) SIGTRAP when it executes the first
401 * instruction after returning to userland.
402 */
403 td->td_frame->tf_rflags &= ~PSL_T;
404
405 /*
406 * Set registers for trampoline to user mode. Leave space for the
407 * return address on stack. These are the kernel mode register values.
408 */
409 pcb2->pcb_r12 = (register_t)fork_return; /* trampoline arg */
410 pcb2->pcb_rbp = 0;
411 pcb2->pcb_rsp = (register_t)td->td_frame - sizeof(void *); /* trampoline arg */
412 pcb2->pcb_rbx = (register_t)td; /* trampoline arg */
413 pcb2->pcb_rip = (register_t)fork_trampoline;
414 /*
415 * If we didn't copy the pcb, we'd need to do the following registers:
416 * pcb2->pcb_cr3: cloned above.
417 * pcb2->pcb_dr*: cloned above.
418 * pcb2->pcb_savefpu: cloned above.
419 * pcb2->pcb_onfault: cloned above (always NULL here?).
420 * pcb2->pcb_[fg]sbase: cloned above
421 */
422
423 /* Setup to release spin count in fork_exit(). */
424 td->td_md.md_spinlock_count = 1;
425 td->td_md.md_saved_flags = PSL_KERNEL | PSL_I;
426 }
427
428 /*
429 * Set that machine state for performing an upcall that has to
430 * be done in thread_userret() so that those upcalls generated
431 * in thread_userret() itself can be done as well.
432 */
433 void
434 cpu_set_upcall_kse(struct thread *td, void (*entry)(void *), void *arg,
435 stack_t *stack)
436 {
437
438 /*
439 * Do any extra cleaning that needs to be done.
440 * The thread may have optional components
441 * that are not present in a fresh thread.
442 * This may be a recycled thread so make it look
443 * as though it's newly allocated.
444 */
445 cpu_thread_clean(td);
446
447 #ifdef COMPAT_FREEBSD32
448 if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
449 /*
450 * Set the trap frame to point at the beginning of the uts
451 * function.
452 */
453 td->td_frame->tf_rbp = 0;
454 td->td_frame->tf_rsp =
455 (((uintptr_t)stack->ss_sp + stack->ss_size - 4) & ~0x0f) - 4;
456 td->td_frame->tf_rip = (uintptr_t)entry;
457
458 /*
459 * Pass the address of the mailbox for this kse to the uts
460 * function as a parameter on the stack.
461 */
462 suword32((void *)(td->td_frame->tf_rsp + sizeof(int32_t)),
463 (uint32_t)(uintptr_t)arg);
464
465 return;
466 }
467 #endif
468
469 /*
470 * Set the trap frame to point at the beginning of the uts
471 * function.
472 */
473 td->td_frame->tf_rbp = 0;
474 td->td_frame->tf_rsp =
475 ((register_t)stack->ss_sp + stack->ss_size) & ~0x0f;
476 td->td_frame->tf_rsp -= 8;
477 td->td_frame->tf_rip = (register_t)entry;
478 td->td_frame->tf_ds = _udatasel;
479 td->td_frame->tf_es = _udatasel;
480 td->td_frame->tf_fs = _ufssel;
481 td->td_frame->tf_gs = _ugssel;
482 td->td_frame->tf_flags = TF_HASSEGS;
483
484 /*
485 * Pass the address of the mailbox for this kse to the uts
486 * function as a parameter on the stack.
487 */
488 td->td_frame->tf_rdi = (register_t)arg;
489 }
490
491 int
492 cpu_set_user_tls(struct thread *td, void *tls_base)
493 {
494 struct pcb *pcb;
495
496 if ((u_int64_t)tls_base >= VM_MAXUSER_ADDRESS)
497 return (EINVAL);
498
499 pcb = td->td_pcb;
500 #ifdef COMPAT_FREEBSD32
501 if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
502 pcb->pcb_gsbase = (register_t)tls_base;
503 return (0);
504 }
505 #endif
506 pcb->pcb_fsbase = (register_t)tls_base;
507 set_pcb_flags(pcb, PCB_FULL_IRET);
508 return (0);
509 }
510
511 #ifdef SMP
512 static void
513 cpu_reset_proxy()
514 {
515
516 cpu_reset_proxy_active = 1;
517 while (cpu_reset_proxy_active == 1)
518 ; /* Wait for other cpu to see that we've started */
519 stop_cpus((1<<cpu_reset_proxyid));
520 printf("cpu_reset_proxy: Stopped CPU %d\n", cpu_reset_proxyid);
521 DELAY(1000000);
522 cpu_reset_real();
523 }
524 #endif
525
526 void
527 cpu_reset()
528 {
529 #ifdef SMP
530 cpumask_t map;
531 u_int cnt;
532
533 if (smp_active) {
534 map = PCPU_GET(other_cpus) & ~stopped_cpus;
535 if (map != 0) {
536 printf("cpu_reset: Stopping other CPUs\n");
537 stop_cpus(map);
538 }
539
540 if (PCPU_GET(cpuid) != 0) {
541 cpu_reset_proxyid = PCPU_GET(cpuid);
542 cpustop_restartfunc = cpu_reset_proxy;
543 cpu_reset_proxy_active = 0;
544 printf("cpu_reset: Restarting BSP\n");
545
546 /* Restart CPU #0. */
547 atomic_store_rel_int(&started_cpus, 1 << 0);
548
549 cnt = 0;
550 while (cpu_reset_proxy_active == 0 && cnt < 10000000)
551 cnt++; /* Wait for BSP to announce restart */
552 if (cpu_reset_proxy_active == 0)
553 printf("cpu_reset: Failed to restart BSP\n");
554 enable_intr();
555 cpu_reset_proxy_active = 2;
556
557 while (1);
558 /* NOTREACHED */
559 }
560
561 DELAY(1000000);
562 }
563 #endif
564 cpu_reset_real();
565 /* NOTREACHED */
566 }
567
568 static void
569 cpu_reset_real()
570 {
571 struct region_descriptor null_idt;
572 int b;
573
574 disable_intr();
575
576 /*
577 * Attempt to do a CPU reset via the keyboard controller,
578 * do not turn off GateA20, as any machine that fails
579 * to do the reset here would then end up in no man's land.
580 */
581 outb(IO_KBD + 4, 0xFE);
582 DELAY(500000); /* wait 0.5 sec to see if that did it */
583
584 /*
585 * Attempt to force a reset via the Reset Control register at
586 * I/O port 0xcf9. Bit 2 forces a system reset when it
587 * transitions from 0 to 1. Bit 1 selects the type of reset
588 * to attempt: 0 selects a "soft" reset, and 1 selects a
589 * "hard" reset. We try a "hard" reset. The first write sets
590 * bit 1 to select a "hard" reset and clears bit 2. The
591 * second write forces a 0 -> 1 transition in bit 2 to trigger
592 * a reset.
593 */
594 outb(0xcf9, 0x2);
595 outb(0xcf9, 0x6);
596 DELAY(500000); /* wait 0.5 sec to see if that did it */
597
598 /*
599 * Attempt to force a reset via the Fast A20 and Init register
600 * at I/O port 0x92. Bit 1 serves as an alternate A20 gate.
601 * Bit 0 asserts INIT# when set to 1. We are careful to only
602 * preserve bit 1 while setting bit 0. We also must clear bit
603 * 0 before setting it if it isn't already clear.
604 */
605 b = inb(0x92);
606 if (b != 0xff) {
607 if ((b & 0x1) != 0)
608 outb(0x92, b & 0xfe);
609 outb(0x92, b | 0x1);
610 DELAY(500000); /* wait 0.5 sec to see if that did it */
611 }
612
613 printf("No known reset method worked, attempting CPU shutdown\n");
614 DELAY(1000000); /* wait 1 sec for printf to complete */
615
616 /* Wipe the IDT. */
617 null_idt.rd_limit = 0;
618 null_idt.rd_base = 0;
619 lidt(&null_idt);
620
621 /* "good night, sweet prince .... <THUNK!>" */
622 breakpoint();
623
624 /* NOTREACHED */
625 while(1);
626 }
627
628 /*
629 * Allocate an sf_buf for the given vm_page. On this machine, however, there
630 * is no sf_buf object. Instead, an opaque pointer to the given vm_page is
631 * returned.
632 */
633 struct sf_buf *
634 sf_buf_alloc(struct vm_page *m, int pri)
635 {
636
637 return ((struct sf_buf *)m);
638 }
639
640 /*
641 * Free the sf_buf. In fact, do nothing because there are no resources
642 * associated with the sf_buf.
643 */
644 void
645 sf_buf_free(struct sf_buf *sf)
646 {
647 }
648
649 /*
650 * Software interrupt handler for queued VM system processing.
651 */
652 void
653 swi_vm(void *dummy)
654 {
655 if (busdma_swi_pending != 0)
656 busdma_swi();
657 }
658
659 /*
660 * Tell whether this address is in some physical memory region.
661 * Currently used by the kernel coredump code in order to avoid
662 * dumping the ``ISA memory hole'' which could cause indefinite hangs,
663 * or other unpredictable behaviour.
664 */
665
666 int
667 is_physical_memory(vm_paddr_t addr)
668 {
669
670 #ifdef DEV_ISA
671 /* The ISA ``memory hole''. */
672 if (addr >= 0xa0000 && addr < 0x100000)
673 return 0;
674 #endif
675
676 /*
677 * stuff other tests for known memory-mapped devices (PCI?)
678 * here
679 */
680
681 return 1;
682 }
Cache object: 7cdcf0a4931bb4a728057eff1cd685e7
|