FreeBSD/Linux Kernel Cross Reference
sys/arm/arm/cpufunc_asm_armv6.S

     /*      $NetBSD: cpufunc_asm_armv6.S,v 1.4 2010/12/10 02:06:22 bsh Exp $        */
     
     /*
      * Copyright (c) 2002, 2005 ARM Limited
      * Portions Copyright (c) 2007 Microsoft
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. The name of the company may not be used to endorse or promote
     *    products derived from this software without specific prior written
     *    permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
     * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
     * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
     * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
     * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     * ARMv6 assembly functions for manipulating caches.
     * These routines can be used by any core that supports the mcrr address
     * range operations.
     */
    
    /*
     * $FreeBSD: releng/10.2/sys/arm/arm/cpufunc_asm_armv6.S 269796 2014-08-11 01:29:28Z ian $
     */
     
    #include <machine/asm.h>
    
            .arch   armv6
    
    /*
     * Functions to set the MMU Translation Table Base register
     *
     * We need to clean and flush the cache as it uses virtual
     * addresses that are about to change.
     */
    ENTRY(armv6_setttb)
            mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
    
            mcr     p15, 0, r0, c2, c0, 0   /* load new TTB */
    
            mcr     p15, 0, r0, c8, c7, 0   /* invalidate I+D TLBs */
            RET
    END(armv6_setttb)
    
    /*
     * Cache operations.
     */
    
    /* LINTSTUB: void armv6_icache_sync_range(vaddr_t, vsize_t); */
    ENTRY_NP(armv6_icache_sync_range)
            add     r1, r1, r0
            sub     r1, r1, #1
            mcrr    p15, 0, r1, r0, c5      /* invalidate I cache range */
            mcrr    p15, 0, r1, r0, c12     /* clean D cache range */
            mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
            RET
    END(armv6_icache_sync_range)
    
    /* LINTSTUB: void armv6_icache_sync_all(void); */
    ENTRY_NP(armv6_icache_sync_all)
            /*
             * We assume that the code here can never be out of sync with the
             * dcache, so that we can safely flush the Icache and fall through
             * into the Dcache cleaning code.
             */
            mcr     p15, 0, r0, c7, c5, 0   /* Flush I cache */
            mcr     p15, 0, r0, c7, c10, 0  /* Clean D cache */
            mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
            RET
    END(armv6_icache_sync_all)
    
    /* LINTSTUB: void armv6_dcache_wb_range(vaddr_t, vsize_t); */
    ENTRY(armv6_dcache_wb_range)
            add     r1, r1, r0
            sub     r1, r1, #1
            mcrr    p15, 0, r1, r0, c12     /* clean D cache range */
            mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
            RET
    END(armv6_dcache_wb_range)
            
    /* LINTSTUB: void armv6_dcache_wbinv_range(vaddr_t, vsize_t); */
    ENTRY(armv6_dcache_wbinv_range)
            add     r1, r1, r0
            sub     r1, r1, #1
           mcrr    p15, 0, r1, r0, c14     /* clean and invaliate D cache range */
           mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
           RET
   END(armv6_dcache_wbinv_range)
           
   /*
    * Note, we must not invalidate everything.  If the range is too big we
    * must use wb-inv of the entire cache.
    *
    * LINTSTUB: void armv6_dcache_inv_range(vaddr_t, vsize_t);
    */
   ENTRY(armv6_dcache_inv_range)
           add     r1, r1, r0
           sub     r1, r1, #1
           mcrr    p15, 0, r1, r0, c6      /* invaliate D cache range */
           mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
           RET
   END(armv6_dcache_inv_range)
   
   /* LINTSTUB: void armv6_idcache_wbinv_range(vaddr_t, vsize_t); */
   ENTRY(armv6_idcache_wbinv_range)
           add     r1, r1, r0
           sub     r1, r1, #1
           mcrr    p15, 0, r1, r0, c5      /* invaliate I cache range */
           mcrr    p15, 0, r1, r0, c14     /* clean & invaliate D cache range */
           mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
           RET
   END(armv6_idcache_wbinv_range)
   
   /* LINTSTUB: void armv6_idcache_wbinv_all(void); */
   ENTRY_NP(armv6_idcache_wbinv_all)
           /*
            * We assume that the code here can never be out of sync with the
            * dcache, so that we can safely flush the Icache and fall through
            * into the Dcache purging code.
            */
           mcr     p15, 0, r0, c7, c5, 0   /* Flush I cache */
           /* Fall through to purge Dcache. */
   
   /* LINTSTUB: void armv6_dcache_wbinv_all(void); */
   EENTRY(armv6_dcache_wbinv_all)
           mcr     p15, 0, r0, c7, c14, 0  /* clean & invalidate D cache */
           mcr     p15, 0, r0, c7, c10, 4  /* drain the write buffer */
           RET
   EEND(armv6_dcache_wbinv_all)
   END(armv6_idcache_wbinv_all)
   
   ENTRY(armv6_idcache_inv_all)
           mov     r0, #0
           mcr     p15, 0, r0, c7, c7, 0   /* invalidate all I+D cache */
           RET
   END(armv6_idcache_inv_all)
   

Cache object: 211f00970ec3211fb7a06108d6b7328e