ETHERNUT5

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # Kernel configuration for Ethernut 5 boards
    2 #
    3 # For more information on this file, please read the config(5) manual page,
    4 # and/or the handbook section on Kernel Configuration Files:
    5 #
    6 #    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
    7 #
    8 # The handbook is also available locally in /usr/share/doc/handbook
    9 # if you've installed the doc distribution, otherwise always see the
   10 # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
   11 # latest information.
   12 #
   13 # An exhaustive list of options and more detailed explanations of the
   14 # device lines is also present in the ../../conf/NOTES and NOTES files.
   15 # If you are in doubt as to the purpose or necessity of a line, check first
   16 # in NOTES.
   17 #
   18 # $FreeBSD: releng/9.1/sys/arm/conf/ETHERNUT5 237386 2012-06-21 11:23:38Z marius $
   19 
   20 ident           ETHERNUT5
   21 
   22 include "../at91/std.ethernut5"
   23 
   24 # To statically compile in device wiring instead of /boot/device.hints
   25 hints           "ETHERNUT5.hints"
   26 
   27 #makeoptions    DEBUG=-g                # Build kernel with gdb(1) debug symbols
   28 
   29 options         SCHED_4BSD              # 4BSD scheduler
   30 #options        PREEMPTION              # Enable kernel thread preemption
   31 options         INET                    # InterNETworking
   32 #options        INET6                   # IPv6 communications protocols
   33 #options        SCTP                    # Stream Control Transmission Protocol
   34 options         FFS                     # Berkeley Fast Filesystem
   35 options         SOFTUPDATES             # Enable FFS soft updates support
   36 #options        UFS_ACL                 # Support for access control lists
   37 options         UFS_DIRHASH             # Improve performance on big directories
   38 #options        UFS_GJOURNAL            # Enable gjournal-based UFS journaling
   39 #options        MD_ROOT                 # MD is a potential root device
   40 options         NFSCL                   # New Network Filesystem Client
   41 #options        NFSD                    # New Network Filesystem Server
   42 options         NFSLOCKD                # Network Lock Manager
   43 options         NFS_ROOT                # NFS usable as /, requires NFSCL
   44 #options        MSDOSFS                 # MSDOS Filesystem
   45 #options        CD9660                  # ISO 9660 Filesystem
   46 #options        PROCFS                  # Process filesystem (requires PSEUDOFS)
   47 #options        PSEUDOFS                # Pseudo-filesystem framework
   48 #options        GEOM_PART_GPT           # GUID Partition Tables.
   49 #options        GEOM_LABEL              # Provides labelization
   50 #options        COMPAT_FREEBSD5         # Compatible with FreeBSD5
   51 #options        COMPAT_FREEBSD6         # Compatible with FreeBSD6
   52 #options        COMPAT_FREEBSD7         # Compatible with FreeBSD7
   53 options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
   54 options         KTRACE                  # ktrace(1) support
   55 #options        STACK                   # stack(9) support
   56 options         SYSVSHM                 # SYSV-style shared memory
   57 options         SYSVMSG                 # SYSV-style message queues
   58 options         SYSVSEM                 # SYSV-style semaphores
   59 options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
   60 options         PRINTF_BUFR_SIZE=128    # Prevent printf output being interspersed.
   61 #options        HWPMC_HOOKS             # Necessary kernel hooks for hwpmc(4)
   62 #options        AUDIT                   # Security event auditing
   63 #options        CAPABILITY_MODE         # Capsicum capability mode
   64 #options        CAPABILITIES            # Capsicum capabilities
   65 #options        MAC                     # TrustedBSD MAC Framework
   66 #options        INCLUDE_CONFIG_FILE     # Include this file in kernel
   67 
   68 # required for netbooting
   69 options         BOOTP
   70 options         BOOTP_COMPAT
   71 options         BOOTP_NFSROOT
   72 options         BOOTP_NFSV3
   73 options         BOOTP_WIRED_TO=ate0
   74 
   75 # alternatively, boot from a MMC/SD memory card
   76 #options        ROOTDEVNAME=\"ufs:/dev/mmcsd0a\"
   77 
   78 # kernel/memory size reduction
   79 options         MUTEX_NOINLINE
   80 options         NO_FFS_SNAPSHOT
   81 options         NO_SWAPPING
   82 options         NO_SYSCTL_DESCR
   83 options         RWLOCK_NOINLINE
   84 
   85 # Debugging support.  Always need this:
   86 #options        KDB                     # Enable kernel debugger support.
   87 # For minimum debugger support (stable branch) use:
   88 #options        KDB_TRACE               # Print a stack trace for a panic.
   89 # For full debugger support use this instead:
   90 #options        DDB                     # Support DDB.
   91 #options        GDB                     # Support remote GDB.
   92 #options        DEADLKRES               # Enable the deadlock resolver
   93 #options        INVARIANTS              # Enable calls of extra sanity checking
   94 #options        INVARIANT_SUPPORT       # Extra sanity checks of internal structures, required by INVARIANTS
   95 #options        WITNESS                 # Enable checks to detect deadlocks and cycles
   96 #options        WITNESS_SKIPSPIN        # Don't run witness on spinlocks for speed
   97 #options        MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
   98 
   99 # The `bpf' device enables the Berkeley Packet Filter.
  100 # Be aware of the administrative consequences of enabling this!
  101 # Note that 'bpf' is required for DHCP.
  102 device          bpf             # Berkeley packet filter
  103 
  104 # Ethernet
  105 device          mii             # Minimal MII support
  106 device          ate             # Atmel AT91 Ethernet friver
  107 
  108 # I2C
  109 device          at91_twi        # Atmel AT91 Two-wire Interface
  110 device          iic             # I2C generic I/O device driver
  111 device          iicbus          # I2C bus system
  112 device          pcf8563         # NXP PCF8563 clock/calendar
  113 
  114 # MMC/SD
  115 device          at91_mci        # Atmel AT91 Multimedia Card Interface
  116 options         AT91_MCI_HAS_4WIRE
  117 device          mmc             # MMC/SD bus
  118 device          mmcsd           # MMC/SD memory card
  119 
  120 # DataFlash
  121 device          at91_spi        # Atmel AT91 Serial Peripheral Interface
  122 device          spibus          # SPI bus
  123 device          at45d           # Atmel AT45D
  124 device          geom_map        # GEOM partition mapping
  125 
  126 # Pseudo devices.
  127 device          loop            # Network loopback
  128 device          random          # Entropy device
  129 device          ether           # Ethernet support
  130 #device         vlan            # 802.1Q VLAN support
  131 #device         tun             # Packet tunnel.
  132 #device         md              # Memory "disks"
  133 #device         gif             # IPv6 and IPv4 tunneling
  134 #device         faith           # IPv6-to-IPv4 relaying (translation)
  135 #device         firmware        # firmware assist module
  136 
  137 # SCSI peripherals
  138 #device         scbus           # SCSI bus (required for ATA/SCSI)
  139 #device         ch              # SCSI media changers
  140 #device         da              # Direct Access (disks)
  141 #device         sa              # Sequential Access (tape etc)
  142 #device         cd              # CD
  143 #device         pass            # Passthrough device (direct ATA/SCSI access)
  144 #device         ses             # SCSI Environmental Services (and SAF-TE)
  145 #device         ctl             # CAM Target Layer
  146 
  147 # Serial (COM) ports
  148 device          uart            # Multi-uart driver
  149 options         ALT_BREAK_TO_DEBUGGER
  150 
  151 # USB support
  152 #options        USB_DEBUG       # enable debug msgs
  153 device          ohci            # OHCI PCI->USB interface
  154 device          usb             # USB Bus (required)
  155 #device         umass           # Disks/Mass storage - Requires scbus and da
  156 
  157 # watchdog
  158 device          at91_wdt        # Atmel AT91 Watchdog Timer

Cache object: ffdac73640530658051820698a9c7d0e

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/arm/conf/ETHERNUT5

FreeBSD/Linux Kernel Cross Reference
sys/arm/conf/ETHERNUT5