RPI-B

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 #
    2 # RPI-B -- Custom configuration for the Raspberry Pi
    3 #
    4 # For more information on this file, please read the config(5) manual page,
    5 # and/or the handbook section on Kernel Configuration Files:
    6 #
    7 #    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
    8 #
    9 # The handbook is also available locally in /usr/share/doc/handbook
   10 # if you've installed the doc distribution, otherwise always see the
   11 # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
   12 # latest information.
   13 #
   14 # An exhaustive list of options and more detailed explanations of the
   15 # device lines is also present in the ../../conf/NOTES and NOTES files.
   16 # If you are in doubt as to the purpose or necessity of a line, check first
   17 # in NOTES.
   18 #
   19 # $FreeBSD$
   20 
   21 ident           RPI-B
   22 
   23 include         "std.armv6"
   24 include         "../broadcom/bcm2835/std.rpi"
   25 include         "../broadcom/bcm2835/std.bcm2835"
   26 
   27 options         SCHED_4BSD              # 4BSD scheduler
   28 options         PLATFORM
   29 
   30 # NFS root from boopt/dhcp
   31 #options        BOOTP
   32 #options        BOOTP_NFSROOT
   33 #options        BOOTP_COMPAT
   34 #options        BOOTP_NFSV3
   35 #options        BOOTP_WIRED_TO=ue0
   36 
   37 #options        ROOTDEVNAME=\"ufs:mmcsd0s2\"
   38 
   39 # pseudo devices
   40 device          clk
   41 device          phy
   42 device          hwreset
   43 device          nvmem
   44 device          regulator
   45 device          syscon
   46 
   47 device          bpf
   48 device          loop
   49 device          ether
   50 device          uart
   51 device          pty
   52 device          snp
   53 device          pl011
   54 
   55 # Device mode support
   56 device          usb_template            # Control of the gadget
   57 
   58 # Comment following lines for boot console on serial port
   59 device          vt
   60 device          kbdmux
   61 device          ukbd
   62 
   63 device          sdhci
   64 device          mmc
   65 device          mmcsd
   66 
   67 device          gpio
   68 device          gpioled
   69 
   70 # I2C
   71 device          iic
   72 device          iicbus
   73 device          bcm2835_bsc
   74 
   75 device          md
   76 
   77 # USB support
   78 device          usb
   79 device          dwcotg                  # DWC OTG controller
   80 
   81 # USB storage support
   82 device          scbus
   83 device          da
   84 device          umass
   85 
   86 # USB ethernet support
   87 device          smscphy
   88 device          mii
   89 device          smsc
   90 
   91 # SPI
   92 device          spibus
   93 device          bcm2835_spi
   94 
   95 device          vchiq
   96 device          sound
   97 
   98 device          fdt_pinctrl
   99 
  100 # HID support
  101 device          hid                     # Generic HID support
  102 
  103 # Flattened Device Tree
  104 options         FDT                     # Configure using FDT/DTB data
  105 # Note:  DTB is normally loaded and modified by RPi boot loader, then
  106 # handed to kernel via U-Boot and ubldr.
  107 #options        FDT_DTB_STATIC
  108 #makeoptions    FDT_DTS_FILE=rpi.dts
  109 makeoptions     MODULES_EXTRA="dtb/rpi rpi_ft5406"

Cache object: 380382cb04d7307e98e8e7bf1c1d975b

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/arm/conf/RPI-B

FreeBSD/Linux Kernel Cross Reference
sys/arm/conf/RPI-B