SAM9X25EK

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card 
    2 #
    3 # For more information on this file, please read the handbook section on
    4 # Kernel Configuration Files:
    5 #
    6 #    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
    7 #
    8 # The handbook is also available locally in /usr/share/doc/handbook
    9 # if you've installed the doc distribution, otherwise always see the
   10 # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
   11 # latest information.
   12 #
   13 # An exhaustive list of options and more detailed explanations of the
   14 # device lines is also present in the ../../conf/NOTES and NOTES files. 
   15 # If you are in doubt as to the purpose or necessity of a line, check first 
   16 # in NOTES.
   17 #
   18 # $FreeBSD: releng/10.2/sys/arm/conf/SAM9X25EK 278676 2015-02-13 15:27:46Z ian $
   19 
   20 #NO_UNIVERSE
   21 
   22 ident           SAM9X25EK
   23 
   24 include "../at91/std.sam9x25ek"
   25 
   26 #To statically compile in device wiring instead of /boot/device.hints
   27 hints           "SAM9G20EK.hints"
   28 makeoptions     MODULES_OVERRIDE=""
   29 
   30 makeoptions     DEBUG=-g                # Build kernel with gdb(1) debug symbols
   31 options         DDB
   32 options         KDB
   33 
   34 options         SCHED_4BSD              # 4BSD scheduler
   35 options         INET                    # InterNETworking
   36 #options        INET6                   # IPv6 communications protocols
   37 options         GEOM_PART_BSD           # BSD partition scheme
   38 options         GEOM_PART_MBR           # MBR partition scheme
   39 options         TMPFS                   # Efficient memory filesystem
   40 options         FFS                     # Berkeley Fast Filesystem
   41 #options        SOFTUPDATES             # Enable FFS soft updates support
   42 #options        UFS_ACL                 # Support for access control lists
   43 #options        UFS_DIRHASH             # Improve performance on big directories
   44 #options        MD_ROOT                 # MD is a potential root device
   45 #options        MD_ROOT_SIZE=4096       # 4MB ram disk
   46 options         NFSCL                   # New Network Filesystem Client
   47 #options        NFSD                    # New Network Filesystem Server
   48 #options        NFSLOCKD                # Network Lock Manager
   49 #options        NFS_ROOT                # NFS usable as /, requires NFSCL
   50 #options        BOOTP_NFSROOT
   51 #options        BOOTP
   52 #options        BOOTP_NFSV3
   53 #options        BOOTP_WIRED_TO=ate0
   54 #options        BOOTP_COMPAT
   55 
   56 options         ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\"
   57 
   58 options         ALT_BREAK_TO_DEBUGGER
   59 
   60 #options        MSDOSFS                 # MSDOS Filesystem
   61 #options        CD9660                  # ISO 9660 Filesystem
   62 #options        PROCFS                  # Process filesystem (requires PSEUDOFS)
   63 #options        PSEUDOFS                # Pseudo-filesystem framework
   64 #options        SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
   65 #options        KTRACE                  # ktrace(1) support
   66 options         SYSVSHM                 # SYSV-style shared memory
   67 options         SYSVMSG                 # SYSV-style message queues
   68 options         SYSVSEM                 # SYSV-style semaphores
   69 options         _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
   70 options         MUTEX_NOINLINE
   71 options         RWLOCK_NOINLINE
   72 options         NO_FFS_SNAPSHOT
   73 options         NO_SWAPPING
   74 
   75 # Debugging for use in -current
   76 #options        INVARIANTS              # Enable calls of extra sanity checking
   77 #options        INVARIANT_SUPPORT       # Extra sanity checks of internal structures, required by INVARIANTS
   78 #options        WITNESS                 # Enable checks to detect deadlocks and cycles
   79 #options        WITNESS_SKIPSPIN        # Don't run witness on spinlocks for speed
   80 #options        DIAGNOSTIC
   81 
   82 device          random
   83 device          pty
   84 device          loop
   85 device          bpf
   86 device          ether
   87 device          md
   88 
   89 device          uart                    # Serial Ports
   90 
   91 # Ethernet
   92 device          ate                     # Ethernet Driver       
   93 device          mii
   94 option          AT91_ATE_USE_RMII
   95 
   96 #device         at91_twi                # TWI: Two Wire Interface (EEPROM)
   97 device          at91_wdt                # WDT: Watchdog timer
   98 
   99 # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware 
  100 #       confilict on this card. Use one or the other.
  101 #       see board_sam9g20ek.c
  102 
  103 # SPI: Data Flash 
  104 #device         at91_spi                # SPI:
  105 #device         spibus
  106 #device         at45d                   # at45db642 and maybe others
  107 
  108 # MMC/SD
  109 device          at91_mci
  110 device          mmc
  111 device          mmcsd
  112 #option         AT91_MCI_SLOT_B
  113 option          AT91_MCI_HAS_4WIRE
  114 
  115 # iic
  116 device          iic
  117 device          iicbus
  118 device          icee
  119 
  120 # SCSI peripherals
  121 device          scbus                   # SCSI bus (required for ATA/SCSI)
  122 device          da                      # Direct Access (disks)
  123 device          cd                      # CD
  124 device          pass                    # Passthrough device (direct ATA/SCSI access)
  125 
  126 # USB support
  127 #device         ohci                    # OHCI localbus->USB interface
  128 #device         usb                     # USB Bus (required)
  129 #device         umass                   # Disks/Mass storage - Requires scbus and da
  130 #device         uhid                    # "Human Interface Devices"
  131 #device         ulpt                    # Printer
  132 #device         udbp                    # USB Double Bulk Pipe devices
  133 
  134 # USB Ethernet, requires miibus
  135 device          miibus
  136 #device         aue                     # ADMtek USB Ethernet
  137 #device         axe                     # ASIX Electronics USB Ethernet
  138 #device         cdce                    # Generic USB over Ethernet
  139 #device         cue                     # CATC USB Ethernet
  140 #device         kue                     # Kawasaki LSI USB Ethernet
  141 #device         rue                     # RealTek RTL8150 USB Ethernet
  142 #device         udav                    # Davicom DM9601E USB
  143 
  144 # USB Wireless
  145 #device         rum                     # Ralink Technology RT2501USB wireless NICs
  146 #device         uath                    # Atheros AR5523 wireless NICs
  147 #device         ural                    # Ralink Technology RT2500USB wireless NICs
  148 #device         zyd                     # ZyDAS zd1211/zd1211b wireless NICs
  149 
  150 # Wireless NIC cards
  151 #device         wlan                    # 802.11 support
  152 #device         wlan_wep                # 802.11 WEP support
  153 #device         wlan_ccmp               # 802.11 CCMP support
  154 #device         wlan_tkip               # 802.11 TKIP support
  155 #device         wlan_amrr               # AMRR transmit rate control algorithm
  156

Cache object: dd5f5f78581eb743fb3975d9f6c63740

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/arm/conf/SAM9X25EK

FreeBSD/Linux Kernel Cross Reference
sys/arm/conf/SAM9X25EK