Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/arm/xilinx/zy7_ehci.c
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * Copyright (c) 2012-2013 Thomas Skibo 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: releng/10.0/sys/arm/xilinx/zy7_ehci.c 250015 2013-04-28 07:00:36Z wkoszek $ 27 */ 28 29 /* 30 * A host-controller driver for Zynq-7000's USB OTG controller. 31 * 32 * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual. 33 * (v1.4) November 16, 2012. Xilinx doc UG585. Ch. 15 covers the USB 34 * controller and register definitions are in appendix B.34. 35 */ 36 37 38 #include <sys/cdefs.h> 39 __FBSDID("$FreeBSD: releng/10.0/sys/arm/xilinx/zy7_ehci.c 250015 2013-04-28 07:00:36Z wkoszek $"); 40 41 #include <sys/param.h> 42 #include <sys/systm.h> 43 #include <sys/bus.h> 44 #include <sys/conf.h> 45 #include <sys/kernel.h> 46 #include <sys/lock.h> 47 #include <sys/module.h> 48 #include <sys/mutex.h> 49 #include <sys/condvar.h> 50 #include <sys/resource.h> 51 #include <sys/rman.h> 52 53 #include <machine/bus.h> 54 #include <machine/resource.h> 55 #include <machine/stdarg.h> 56 57 #include <dev/fdt/fdt_common.h> 58 #include <dev/ofw/ofw_bus.h> 59 #include <dev/ofw/ofw_bus_subr.h> 60 61 #include <dev/usb/usb.h> 62 #include <dev/usb/usbdi.h> 63 64 #include <dev/usb/usb_core.h> 65 #include <dev/usb/usb_busdma.h> 66 #include <dev/usb/usb_process.h> 67 #include <dev/usb/usb_util.h> 68 69 #include <dev/usb/usb_controller.h> 70 #include <dev/usb/usb_bus.h> 71 #include <dev/usb/controller/ehci.h> 72 #include <dev/usb/controller/ehcireg.h> 73 74 75 /* Register definitions. */ 76 #define ZY7_USB_ID 0x0000 77 #define ZY7_USB_HWGENERAL 0x0004 78 #define ZY7_USB_HWHOST 0x0008 79 #define ZY7_USB_HWDEVICE 0x000c 80 #define ZY7_USB_HWTXBUF 0x0010 81 #define ZY7_USB_HWRXBUF 0x0014 82 #define ZY7_USB_GPTIMER0LD 0x0080 83 #define ZY7_USB_GPTIMER0CTRL 0x0084 84 #define ZY7_USB_GPTIMER1LD 0x0088 85 #define ZY7_USB_GPTIMER1CTRL 0x008c 86 #define ZY7_USB_SBUSCFG 0x0090 87 #define ZY7_USB_CAPLENGTH_HCIVERSION 0x0100 88 #define ZY7_USB_HCSPARAMS 0x0104 89 #define ZY7_USB_HCCPARAMS 0x0108 90 #define ZY7_USB_DCIVERSION 0x0120 91 #define ZY7_USB_DCCPARAMS 0x0124 92 #define ZY7_USB_USBCMD 0x0140 93 #define ZY7_USB_USBSTS 0x0144 94 #define ZY7_USB_USBINTR 0x0148 95 #define ZY7_USB_FRINDEX 0x014c 96 #define ZY7_USB_PERIODICLISTBASE_DEICEADDR 0x0154 97 #define ZY7_USB_ASYNCLISTADDR_ENDPOINTLISTADDR 0x0158 98 #define ZY7_USB_TTCTRL 0x015c 99 #define ZY7_USB_BURSTSIZE 0x0160 100 #define ZY7_USB_TXFILLTUNING 0x0164 101 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT 16 102 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_MASK (0x3f<<16) 103 #define ZY7_USB_TXTFILLTUNING 0x0168 104 #define ZY7_USB_IC_USB 0x016c 105 #define ZY7_USB_ULPI_VIEWPORT 0x0170 106 #define ZY7_USB_ULPI_VIEWPORT_WU (1<<31) 107 #define ZY7_USB_ULPI_VIEWPORT_RUN (1<<30) 108 #define ZY7_USB_ULPI_VIEWPORT_RW (1<<29) 109 #define ZY7_USB_ULPI_VIEWPORT_SS (1<<27) 110 #define ZY7_USB_ULPI_VIEWPORT_PORT_MASK (7<<24) 111 #define ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT 24 112 #define ZY7_USB_ULPI_VIEWPORT_ADDR_MASK (0xff<<16) 113 #define ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT 16 114 #define ZY7_USB_ULPI_VIEWPORT_DATARD_MASK (0xff<<8) 115 #define ZY7_USB_ULPI_VIEWPORT_DATARD_SHIFT 8 116 #define ZY7_USB_ULPI_VIEWPORT_DATAWR_MASK (0xff<<0) 117 #define ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT 0 118 #define ZY7_USB_ENDPTNAK 0x0178 119 #define ZY7_USB_ENDPTNAKEN 0x017c 120 #define ZY7_USB_CONFIGFLAG 0x0180 121 #define ZY7_USB_PORTSC(n) (0x0180+4*(n)) 122 #define ZY7_USB_PORTSC_PTS_MASK (3<<30) 123 #define ZY7_USB_PORTSC_PTS_SHIFT 30 124 #define ZY7_USB_PORTSC_PTS_UTMI (0<<30) 125 #define ZY7_USB_PORTSC_PTS_ULPI (2<<30) 126 #define ZY7_USB_PORTSC_PTS_SERIAL (3<<30) 127 #define ZY7_USB_PORTSC_PTW (1<<28) 128 #define ZY7_USB_PORTSC_PTS2 (1<<25) 129 #define ZY7_USB_OTGSC 0x01a4 130 #define ZY7_USB_USBMODE 0x01a8 131 #define ZY7_USB_ENDPTSETUPSTAT 0x01ac 132 #define ZY7_USB_ENDPTPRIME 0x01b0 133 #define ZY7_USB_ENDPTFLUSH 0x01b4 134 #define ZY7_USB_ENDPTSTAT 0x01b8 135 #define ZY7_USB_ENDPTCOMPLETE 0x01bc 136 #define ZY7_USB_ENDPTCTRL(n) (0x01c0+4*(n)) 137 138 #define EHCI_REG_OFFSET ZY7_USB_CAPLENGTH_HCIVERSION 139 #define EHCI_REG_SIZE 0x100 140 141 static int 142 zy7_phy_config(device_t dev, bus_space_tag_t io_tag, bus_space_handle_t bsh) 143 { 144 phandle_t node; 145 char buf[64]; 146 uint32_t portsc; 147 int tries; 148 149 node = ofw_bus_get_node(dev); 150 151 if (OF_getprop(node, "phy_type", buf, sizeof(buf)) > 0) { 152 portsc = bus_space_read_4(io_tag, bsh, ZY7_USB_PORTSC(1)); 153 portsc &= ~(ZY7_USB_PORTSC_PTS_MASK | ZY7_USB_PORTSC_PTW | 154 ZY7_USB_PORTSC_PTS2); 155 156 if (strcmp(buf,"ulpi") == 0) 157 portsc |= ZY7_USB_PORTSC_PTS_ULPI; 158 else if (strcmp(buf,"utmi") == 0) 159 portsc |= ZY7_USB_PORTSC_PTS_UTMI; 160 else if (strcmp(buf,"utmi-wide") == 0) 161 portsc |= (ZY7_USB_PORTSC_PTS_UTMI | 162 ZY7_USB_PORTSC_PTW); 163 else if (strcmp(buf, "serial") == 0) 164 portsc |= ZY7_USB_PORTSC_PTS_SERIAL; 165 166 bus_space_write_4(io_tag, bsh, ZY7_USB_PORTSC(1), portsc); 167 } 168 169 if (OF_getprop(node, "phy_vbus_ext", buf, sizeof(buf)) >= 0) { 170 171 /* Tell PHY that VBUS is supplied externally. */ 172 bus_space_write_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT, 173 ZY7_USB_ULPI_VIEWPORT_RUN | 174 ZY7_USB_ULPI_VIEWPORT_RW | 175 (0 << ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT) | 176 (0x0b << ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT) | 177 (0x60 << ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT) 178 ); 179 180 tries = 100; 181 while ((bus_space_read_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT) & 182 ZY7_USB_ULPI_VIEWPORT_RUN) != 0) { 183 if (--tries < 0) 184 return (-1); 185 DELAY(1); 186 } 187 } 188 189 return (0); 190 } 191 192 static int 193 zy7_ehci_probe(device_t dev) 194 { 195 196 if (!ofw_bus_is_compatible(dev, "xlnx,zy7_ehci")) 197 return (ENXIO); 198 199 device_set_desc(dev, "Zynq-7000 EHCI USB 2.0 controller"); 200 return (0); 201 } 202 203 static int zy7_ehci_detach(device_t dev); 204 205 static int 206 zy7_ehci_attach(device_t dev) 207 { 208 ehci_softc_t *sc = device_get_softc(dev); 209 bus_space_handle_t bsh; 210 int err, rid; 211 212 /* initialize some bus fields */ 213 sc->sc_bus.parent = dev; 214 sc->sc_bus.devices = sc->sc_devices; 215 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 216 217 /* get all DMA memory */ 218 if (usb_bus_mem_alloc_all(&sc->sc_bus, 219 USB_GET_DMA_TAG(dev), &ehci_iterate_hw_softc)) 220 return (ENOMEM); 221 222 /* Allocate memory. */ 223 rid = 0; 224 sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 225 &rid, RF_ACTIVE); 226 if (sc->sc_io_res == NULL) { 227 device_printf(dev, "Can't allocate memory"); 228 zy7_ehci_detach(dev); 229 return (ENOMEM); 230 } 231 232 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 233 bsh = rman_get_bushandle(sc->sc_io_res); 234 sc->sc_io_size = EHCI_REG_SIZE; 235 236 if (bus_space_subregion(sc->sc_io_tag, bsh, EHCI_REG_OFFSET, 237 sc->sc_io_size, &sc->sc_io_hdl) != 0) 238 panic("%s: unable to subregion USB host registers", 239 device_get_name(dev)); 240 241 /* Allocate IRQ. */ 242 rid = 0; 243 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 244 RF_ACTIVE); 245 if (sc->sc_irq_res == NULL) { 246 device_printf(dev, "Can't allocate IRQ\n"); 247 zy7_ehci_detach(dev); 248 return (ENOMEM); 249 } 250 251 /* Add USB device */ 252 sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); 253 if (!sc->sc_bus.bdev) { 254 device_printf(dev, "Could not add USB device\n"); 255 zy7_ehci_detach(dev); 256 return (ENXIO); 257 } 258 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 259 device_set_desc(sc->sc_bus.bdev, "Zynq-7000 ehci USB 2.0 controller"); 260 261 strcpy(sc->sc_vendor, "Xilinx"); /* or IP vendor? */ 262 263 /* Activate the interrupt */ 264 err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 265 NULL, (driver_intr_t *)ehci_interrupt, sc, 266 &sc->sc_intr_hdl); 267 if (err) { 268 device_printf(dev, "Cannot setup IRQ\n"); 269 zy7_ehci_detach(dev); 270 return (err); 271 } 272 273 /* Customization. */ 274 sc->sc_flags |= EHCI_SCFLG_SETMODE | EHCI_SCFLG_TT | 275 EHCI_SCFLG_NORESTERM; 276 277 /* Modify FIFO burst threshold from 2 to 8. */ 278 bus_space_write_4(sc->sc_io_tag, bsh, 279 ZY7_USB_TXFILLTUNING, 280 8 << ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT); 281 282 /* Handle PHY options. */ 283 if (zy7_phy_config(dev, sc->sc_io_tag, bsh) < 0) { 284 device_printf(dev, "Cannot config phy!\n"); 285 zy7_ehci_detach(dev); 286 return (EIO); 287 } 288 289 /* Init ehci. */ 290 err = ehci_init(sc); 291 if (!err) { 292 sc->sc_flags |= EHCI_SCFLG_DONEINIT; 293 err = device_probe_and_attach(sc->sc_bus.bdev); 294 } 295 if (err) { 296 device_printf(dev, "USB init failed err=%d\n", err); 297 zy7_ehci_detach(dev); 298 return (err); 299 } 300 301 return (0); 302 } 303 304 static int 305 zy7_ehci_detach(device_t dev) 306 { 307 ehci_softc_t *sc = device_get_softc(dev); 308 309 sc->sc_flags &= ~EHCI_SCFLG_DONEINIT; 310 311 if (device_is_attached(dev)) 312 bus_generic_detach(dev); 313 314 if (sc->sc_irq_res && sc->sc_intr_hdl) 315 /* call ehci_detach() after ehci_init() called after 316 * successful bus_setup_intr(). 317 */ 318 ehci_detach(sc); 319 if (sc->sc_bus.bdev) { 320 device_detach(sc->sc_bus.bdev); 321 device_delete_child(dev, sc->sc_bus.bdev); 322 } 323 if (sc->sc_irq_res) { 324 if (sc->sc_intr_hdl != NULL) 325 bus_teardown_intr(dev, sc->sc_irq_res, 326 sc->sc_intr_hdl); 327 bus_release_resource(dev, SYS_RES_IRQ, 328 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res); 329 } 330 331 if (sc->sc_io_res) 332 bus_release_resource(dev, SYS_RES_MEMORY, 333 rman_get_rid(sc->sc_io_res), sc->sc_io_res); 334 usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); 335 336 return (0); 337 } 338 339 static device_method_t ehci_methods[] = { 340 /* Device interface */ 341 DEVMETHOD(device_probe, zy7_ehci_probe), 342 DEVMETHOD(device_attach, zy7_ehci_attach), 343 DEVMETHOD(device_detach, zy7_ehci_detach), 344 DEVMETHOD(device_suspend, bus_generic_suspend), 345 DEVMETHOD(device_resume, bus_generic_resume), 346 DEVMETHOD(device_shutdown, bus_generic_shutdown), 347 348 /* Bus interface */ 349 DEVMETHOD(bus_print_child, bus_generic_print_child), 350 351 DEVMETHOD_END 352 }; 353 354 static driver_t ehci_driver = { 355 "ehci", 356 ehci_methods, 357 sizeof(struct ehci_softc), 358 }; 359 static devclass_t ehci_devclass; 360 361 DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, NULL, NULL); 362 MODULE_DEPEND(ehci, usb, 1, 1, 1);
Cache object: 6532b9972ce71b1448c92a9b650e4620
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]