FreeBSD/Linux Kernel Cross Reference
sys/arm/xscale/ixp425/if_npereg.h

     /*-
      * Copyright (c) 2006 Sam Leffler, Errno Consulting
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
      *    notice, this list of conditions and the following disclaimer,
     *    without modification.
     * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
     *    redistribution must be conditioned upon including a substantially
     *    similar Disclaimer requirement for further binary redistribution.
     *
     * NO WARRANTY
     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
     * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
     * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
     * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
     * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     * THE POSSIBILITY OF SUCH DAMAGES.
     *
     * $FreeBSD$
     */
    
    /*
     * Copyright (c) 2001-2005, Intel Corporation.
     * All rights reserved.
     * 
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. Neither the name of the Intel Corporation nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     * 
     * 
     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
     * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     */
    
    #ifndef ARM_XSCALE_IF_NPEREG_H
    #define ARM_XSCALE_IF_NPEREG_H
    
    /*
     * NPE/NPE tx/rx descriptor format.  This is just the area
     * shared with ucode running in the NPE; the driver-specific
     * state is defined in the driver.  The shared area must be
     * cacheline-aligned.  We allocate NPE_MAXSEG "descriptors"
     * per buffer; this allows us to do minimal s/g.  The number
     * of descriptors can be expanded but doing so uses memory
     * so should be done with care.
     *
     * The driver sets up buffers in uncached memory.
     */
    #define NPE_MAXSEG      3               /* empirically selected */
    
    struct npehwbuf {
            struct {                        /* NPE shared area, cacheline aligned */
                    uint32_t next;          /* phys addr of next segment */
                    uint32_t len;           /* buffer/segment length (bytes) */
                    uint32_t data;          /* phys addr of data segment */
                    uint32_t pad[5];        /* pad to cacheline */
            } ix_ne[NPE_MAXSEG];
    };
    
    /* NPE ID's */
    #define NPE_A           0
    #define NPE_B           1
    #define NPE_C           2
    #define NPE_MAX         (NPE_C+1)
    
    #define NPE_PORTS_MAX           2       /* logical ports */
    #define NPE_FRAME_SIZE_DEFAULT  1536
    #define NPE_FRAME_SIZE_MAX      (65536-64)
    #define NPE_FRAME_SIZE_MIN      64
    
    /*
     * Queue Manager-related definitions.
    *
    * These define the layout of 32-bit Q entries passed
    * between the host cpu and the NPE's.
    */
   #define NPE_QM_Q_NPE(e)         (((e)>>0)&0x3)          /* NPE ID */
   #define NPE_QM_Q_PORT(e)        (((e)>>3)&0x1)          /* Port ID */
   #define NPE_QM_Q_PRIO(e)        (((e)>>0)&0x3)          /* 802.1d priority */
   #define NPE_QM_Q_ADDR(e)        ((e)&0xfffffffe0)       /* phys address */
   
   /*
    * Host->NPE requests written to the shared mailbox.
    * The NPE writes the same value back as an ACK.
    */
   #define NPE_GETSTATUS           0x00    /* get firmware revision */
   #define NPE_SETPORTADDRESS      0x01    /* set port id and mac address */
   #define NPE_GETMACADDRDB        0x02    /* upload filter database */
   #define NPE_SETMACADDRDB        0x03    /* download filter database */
   #define NPE_GETSTATS            0x04    /* get statistics */
   #define NPE_RESETSTATS          0x05    /* reset stats + return result */
   #define NPE_SETMAXFRAME         0x06    /* configure max tx/rx frame lengths */
   #define NPE_SETRXTAGMODE        0x07    /* configure VLAN rx operating mode */
   #define NPE_SETDEFRXVID         0x08    /* set def VLAN tag + traffic class */
   #define NPE_SETRXQOSENTRY       0x0b    /* map user pri -> QoS class+rx qid */
   #define NPE_SETFIREWALLMODE     0x0e    /* config firewall services */
   #define NPE_SETLOOPBACK         0x12    /* enable/disable loopback */
   /* ... XXX more */
   
   #define NPE_MAC_MSGID_SHL       24
   #define NPE_MAC_PORTID_SHL      16
   
   /*
    * MAC register definitions; see section
    * 15.2 of the Intel Developers Manual.
    */
   #define NPE_MAC_TX_CNTRL1       0x000
   #define NPE_MAC_TX_CNTRL2       0x004
   #define NPE_MAC_RX_CNTRL1       0x010
   #define NPE_MAC_RX_CNTRL2       0x014
   #define NPE_MAC_RANDOM_SEED     0x020
   #define NPE_MAC_THRESH_P_EMPTY  0x030
   #define NPE_MAC_THRESH_P_FULL   0x038
   #define NPE_MAC_BUF_SIZE_TX     0x040
   #define NPE_MAC_TX_DEFER        0x050
   #define NPE_MAC_RX_DEFER        0x054
   #define NPE_MAC_TX_TWO_DEFER_1  0x060
   #define NPE_MAC_TX_TWO_DEFER_2  0x064
   #define NPE_MAC_SLOT_TIME       0x070
   #define NPE_MAC_MDIO_CMD_1      0x080
   #define NPE_MAC_MDIO_CMD_2      0x084
   #define NPE_MAC_MDIO_CMD_3      0x088
   #define NPE_MAC_MDIO_CMD_4      0x08c
   #define NPE_MAC_MDIO_STS_1      0x090
   #define NPE_MAC_MDIO_STS_2      0x094
   #define NPE_MAC_MDIO_STS_3      0x098
   #define NPE_MAC_MDIO_STS_4      0x09c
   #define NPE_MAC_ADDR_MASK_1     0x0A0
   #define NPE_MAC_ADDR_MASK_2     0x0A4
   #define NPE_MAC_ADDR_MASK_3     0x0A8
   #define NPE_MAC_ADDR_MASK_4     0x0AC
   #define NPE_MAC_ADDR_MASK_5     0x0B0
   #define NPE_MAC_ADDR_MASK_6     0x0B4
   #define NPE_MAC_ADDR_1          0x0C0
   #define NPE_MAC_ADDR_2          0x0C4
   #define NPE_MAC_ADDR_3          0x0C8
   #define NPE_MAC_ADDR_4          0x0CC
   #define NPE_MAC_ADDR_5          0x0D0
   #define NPE_MAC_ADDR_6          0x0D4
   #define NPE_MAC_INT_CLK_THRESH  0x0E0
   #define NPE_MAC_UNI_ADDR_1      0x0F0
   #define NPE_MAC_UNI_ADDR_2      0x0F4
   #define NPE_MAC_UNI_ADDR_3      0x0F8
   #define NPE_MAC_UNI_ADDR_4      0x0FC
   #define NPE_MAC_UNI_ADDR_5      0x100
   #define NPE_MAC_UNI_ADDR_6      0x104
   #define NPE_MAC_CORE_CNTRL      0x1FC
   
   #define NPE_MAC_ADDR_MASK(i)    (NPE_MAC_ADDR_MASK_1 + ((i)<<2))
   #define NPE_MAC_ADDR(i)         (NPE_MAC_ADDR_1 + ((i)<<2))
   #define NPE_MAC_UNI_ADDR(i)     (NPE_MAC_UNI_ADDR_1 + ((i)<<2))
   
   /*
    * Bit definitions
    */
   
   /* TX Control Register 1*/
   #define NPE_TX_CNTRL1_TX_EN             0x01    /* enable TX engine */
   #define NPE_TX_CNTRL1_DUPLEX            0x02    /* select half duplex */
   #define NPE_TX_CNTRL1_RETRY             0x04    /* auto-retry on collision */
   #define NPE_TX_CNTRL1_PAD_EN            0x08    /* pad frames <64 bytes */
   #define NPE_TX_CNTRL1_FCS_EN            0x10    /* append FCS */
   #define NPE_TX_CNTRL1_2DEFER            0x20    /* select 2-part deferral */
   #define NPE_TX_CNTRL1_RMII              0x40
   
   /* TX Control Register 2 */
   #define NPE_TX_CNTRL2_RETRIES_MASK      0xf     /* max retry count */
   
   /* RX Control Register 1 */
   #define NPE_RX_CNTRL1_RX_EN             0x01    /* enable RX engine */
   #define NPE_RX_CNTRL1_PADSTRIP_EN       0x02    /* strip frame padding */
   #define NPE_RX_CNTRL1_CRC_EN            0x04    /* include CRC in RX frame */
   #define NPE_RX_CNTRL1_PAUSE_EN          0x08    /* detect Pause frames */
   #define NPE_RX_CNTRL1_LOOP_EN           0x10    /* loopback tx/rx */
   #define NPE_RX_CNTRL1_ADDR_FLTR_EN      0x20    /* enable address filtering */
   #define NPE_RX_CNTRL1_RX_RUNT_EN        0x40    /* enable RX of runt frames */
   #define NPE_RX_CNTRL1_BCAST_DIS         0x80    /* discard broadcast frames */
   
   /* RX Control Register 2 */
   #define NPE_RX_CNTRL2_DEFER_EN  0x01
   
   /* Core Control Register */
   #define NPE_CORE_RESET                  0x01    /* MAC reset state */
   #define NPE_CORE_RX_FIFO_FLUSH          0x02    /* flush RX FIFO */
   #define NPE_CORE_TX_FIFO_FLUSH          0x04    /* flush TX FIFO */
   #define NPE_CORE_SEND_JAM               0x08    /* send JAM on packet RX */
   #define NPE_CORE_MDC_EN                 0x10    /* IXP42X drives MDC clock */
   
   /*
    * Stat block returned by NPE with NPE_GETSTATS msg.
    */
   struct npestats {
           uint32_t dot3StatsAlignmentErrors;
           uint32_t dot3StatsFCSErrors;
           uint32_t dot3StatsInternalMacReceiveErrors;
           uint32_t RxOverrunDiscards;
           uint32_t RxLearnedEntryDiscards;
           uint32_t RxLargeFramesDiscards;
           uint32_t RxSTPBlockedDiscards;
           uint32_t RxVLANTypeFilterDiscards;
           uint32_t RxVLANIdFilterDiscards;
           uint32_t RxInvalidSourceDiscards;
           uint32_t RxBlackListDiscards;
           uint32_t RxWhiteListDiscards;
           uint32_t RxUnderflowEntryDiscards;
           uint32_t dot3StatsSingleCollisionFrames;
           uint32_t dot3StatsMultipleCollisionFrames;
           uint32_t dot3StatsDeferredTransmissions;
           uint32_t dot3StatsLateCollisions;
           uint32_t dot3StatsExcessiveCollisions;
           uint32_t dot3StatsInternalMacTransmitErrors;
           uint32_t dot3StatsCarrierSenseErrors;
           uint32_t TxLargeFrameDiscards;
           uint32_t TxVLANIdFilterDiscards;
   };
   
   /*
    * Default values
    */
   #define NPE_MAC_INT_CLK_THRESH_DEFAULT  0x1
   
   #define NPE_MAC_RESET_DELAY    1
   
   /* This value applies to RMII */
   #define NPE_MAC_SLOT_TIME_RMII_DEFAULT  0xFF
   
   /*
    * MII definitions - these have been verified against the LXT971 and LXT972 PHYs
    */
   #define NPE_MII_REG_SHL         16
   #define NPE_MII_ADDR_SHL        21
   
   /* NB: shorthands for mii bus mdio routines */
   #define NPE_MAC_MDIO_CMD        NPE_MAC_MDIO_CMD_1
   #define NPE_MAC_MDIO_STS        NPE_MAC_MDIO_STS_1
    
   #define NPE_MII_GO                  (1<<31)
   #define NPE_MII_WRITE               (1<<26)
   #define NPE_MII_TIMEOUT_10TH_SECS        5    
   #define NPE_MII_10TH_SEC_IN_MILLIS     100
   #define NPE_MII_READ_FAIL           (1<<31)
    
   #define NPE_MII_PHY_DEF_DELAY   300     /* max delay before link up, etc. */
   #define NPE_MII_PHY_NO_DELAY    0x0     /* do not delay */
   #define NPE_MII_PHY_NULL        0xff    /* PHY is not present */
   #define NPE_MII_PHY_DEF_ADDR    0x0     /* default PHY's logical address */
   
   /* Register definition */  
   #define NPE_MII_CTRL_REG        0x0     /* Control Register */
   #define NPE_MII_STAT_REG        0x1     /* Status Register */
   #define NPE_MII_PHY_ID1_REG     0x2     /* PHY identifier 1 Register */
   #define NPE_MII_PHY_ID2_REG     0x3     /* PHY identifier 2 Register */
   #define NPE_MII_AN_ADS_REG      0x4     /* Auto-Negotiation       */
                                           /* Advertisement Register */
   #define NPE_MII_AN_PRTN_REG     0x5     /* Auto-Negotiation         */
                                           /* partner ability Register */
   #define NPE_MII_AN_EXP_REG      0x6     /* Auto-Negotiation   */
                                           /* Expansion Register */
   #define NPE_MII_AN_NEXT_REG     0x7     /* Auto-Negotiation            */
                                           /* next-page transmit Register */
   #endif /* ARM_XSCALE_IF_NPEREG_H */

Cache object: e6e489bdf93a0871c57e24d227225776