Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/cam/cam_periph.c
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * Common functions for CAM "type" (peripheral) drivers. 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD: releng/10.4/sys/cam/cam_periph.c 320601 2017-07-03 15:34:19Z ken $"); 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/types.h> 36 #include <sys/malloc.h> 37 #include <sys/kernel.h> 38 #include <sys/bio.h> 39 #include <sys/lock.h> 40 #include <sys/mutex.h> 41 #include <sys/buf.h> 42 #include <sys/proc.h> 43 #include <sys/devicestat.h> 44 #include <sys/bus.h> 45 #include <sys/sbuf.h> 46 #include <vm/vm.h> 47 #include <vm/vm_extern.h> 48 49 #include <cam/cam.h> 50 #include <cam/cam_ccb.h> 51 #include <cam/cam_queue.h> 52 #include <cam/cam_xpt_periph.h> 53 #include <cam/cam_periph.h> 54 #include <cam/cam_debug.h> 55 #include <cam/cam_sim.h> 56 57 #include <cam/scsi/scsi_all.h> 58 #include <cam/scsi/scsi_message.h> 59 #include <cam/scsi/scsi_pass.h> 60 61 static u_int camperiphnextunit(struct periph_driver *p_drv, 62 u_int newunit, int wired, 63 path_id_t pathid, target_id_t target, 64 lun_id_t lun); 65 static u_int camperiphunit(struct periph_driver *p_drv, 66 path_id_t pathid, target_id_t target, 67 lun_id_t lun); 68 static void camperiphdone(struct cam_periph *periph, 69 union ccb *done_ccb); 70 static void camperiphfree(struct cam_periph *periph); 71 static int camperiphscsistatuserror(union ccb *ccb, 72 union ccb **orig_ccb, 73 cam_flags camflags, 74 u_int32_t sense_flags, 75 int *openings, 76 u_int32_t *relsim_flags, 77 u_int32_t *timeout, 78 u_int32_t *action, 79 const char **action_string); 80 static int camperiphscsisenseerror(union ccb *ccb, 81 union ccb **orig_ccb, 82 cam_flags camflags, 83 u_int32_t sense_flags, 84 int *openings, 85 u_int32_t *relsim_flags, 86 u_int32_t *timeout, 87 u_int32_t *action, 88 const char **action_string); 89 static void cam_periph_devctl_notify(union ccb *ccb); 90 91 static int nperiph_drivers; 92 static int initialized = 0; 93 struct periph_driver **periph_drivers; 94 95 static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers"); 96 97 static int periph_selto_delay = 1000; 98 TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay); 99 static int periph_noresrc_delay = 500; 100 TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay); 101 static int periph_busy_delay = 500; 102 TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay); 103 104 105 void 106 periphdriver_register(void *data) 107 { 108 struct periph_driver *drv = (struct periph_driver *)data; 109 struct periph_driver **newdrivers, **old; 110 int ndrivers; 111 112 again: 113 ndrivers = nperiph_drivers + 2; 114 newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH, 115 M_WAITOK); 116 xpt_lock_buses(); 117 if (ndrivers != nperiph_drivers + 2) { 118 /* 119 * Lost race against itself; go around. 120 */ 121 xpt_unlock_buses(); 122 free(newdrivers, M_CAMPERIPH); 123 goto again; 124 } 125 if (periph_drivers) 126 bcopy(periph_drivers, newdrivers, 127 sizeof(*newdrivers) * nperiph_drivers); 128 newdrivers[nperiph_drivers] = drv; 129 newdrivers[nperiph_drivers + 1] = NULL; 130 old = periph_drivers; 131 periph_drivers = newdrivers; 132 nperiph_drivers++; 133 xpt_unlock_buses(); 134 if (old) 135 free(old, M_CAMPERIPH); 136 /* If driver marked as early or it is late now, initialize it. */ 137 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || 138 initialized > 1) 139 (*drv->init)(); 140 } 141 142 void 143 periphdriver_init(int level) 144 { 145 int i, early; 146 147 initialized = max(initialized, level); 148 for (i = 0; periph_drivers[i] != NULL; i++) { 149 early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2; 150 if (early == initialized) 151 (*periph_drivers[i]->init)(); 152 } 153 } 154 155 cam_status 156 cam_periph_alloc(periph_ctor_t *periph_ctor, 157 periph_oninv_t *periph_oninvalidate, 158 periph_dtor_t *periph_dtor, periph_start_t *periph_start, 159 char *name, cam_periph_type type, struct cam_path *path, 160 ac_callback_t *ac_callback, ac_code code, void *arg) 161 { 162 struct periph_driver **p_drv; 163 struct cam_sim *sim; 164 struct cam_periph *periph; 165 struct cam_periph *cur_periph; 166 path_id_t path_id; 167 target_id_t target_id; 168 lun_id_t lun_id; 169 cam_status status; 170 u_int init_level; 171 172 init_level = 0; 173 /* 174 * Handle Hot-Plug scenarios. If there is already a peripheral 175 * of our type assigned to this path, we are likely waiting for 176 * final close on an old, invalidated, peripheral. If this is 177 * the case, queue up a deferred call to the peripheral's async 178 * handler. If it looks like a mistaken re-allocation, complain. 179 */ 180 if ((periph = cam_periph_find(path, name)) != NULL) { 181 182 if ((periph->flags & CAM_PERIPH_INVALID) != 0 183 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { 184 periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; 185 periph->deferred_callback = ac_callback; 186 periph->deferred_ac = code; 187 return (CAM_REQ_INPROG); 188 } else { 189 printf("cam_periph_alloc: attempt to re-allocate " 190 "valid device %s%d rejected flags %#x " 191 "refcount %d\n", periph->periph_name, 192 periph->unit_number, periph->flags, 193 periph->refcount); 194 } 195 return (CAM_REQ_INVALID); 196 } 197 198 periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH, 199 M_NOWAIT|M_ZERO); 200 201 if (periph == NULL) 202 return (CAM_RESRC_UNAVAIL); 203 204 init_level++; 205 206 207 sim = xpt_path_sim(path); 208 path_id = xpt_path_path_id(path); 209 target_id = xpt_path_target_id(path); 210 lun_id = xpt_path_lun_id(path); 211 periph->periph_start = periph_start; 212 periph->periph_dtor = periph_dtor; 213 periph->periph_oninval = periph_oninvalidate; 214 periph->type = type; 215 periph->periph_name = name; 216 periph->scheduled_priority = CAM_PRIORITY_NONE; 217 periph->immediate_priority = CAM_PRIORITY_NONE; 218 periph->refcount = 1; /* Dropped by invalidation. */ 219 periph->sim = sim; 220 SLIST_INIT(&periph->ccb_list); 221 status = xpt_create_path(&path, periph, path_id, target_id, lun_id); 222 if (status != CAM_REQ_CMP) 223 goto failure; 224 periph->path = path; 225 226 xpt_lock_buses(); 227 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 228 if (strcmp((*p_drv)->driver_name, name) == 0) 229 break; 230 } 231 if (*p_drv == NULL) { 232 printf("cam_periph_alloc: invalid periph name '%s'\n", name); 233 xpt_unlock_buses(); 234 xpt_free_path(periph->path); 235 free(periph, M_CAMPERIPH); 236 return (CAM_REQ_INVALID); 237 } 238 periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id); 239 cur_periph = TAILQ_FIRST(&(*p_drv)->units); 240 while (cur_periph != NULL 241 && cur_periph->unit_number < periph->unit_number) 242 cur_periph = TAILQ_NEXT(cur_periph, unit_links); 243 if (cur_periph != NULL) { 244 KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list")); 245 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); 246 } else { 247 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); 248 (*p_drv)->generation++; 249 } 250 xpt_unlock_buses(); 251 252 init_level++; 253 254 status = xpt_add_periph(periph); 255 if (status != CAM_REQ_CMP) 256 goto failure; 257 258 init_level++; 259 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n")); 260 261 status = periph_ctor(periph, arg); 262 263 if (status == CAM_REQ_CMP) 264 init_level++; 265 266 failure: 267 switch (init_level) { 268 case 4: 269 /* Initialized successfully */ 270 break; 271 case 3: 272 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); 273 xpt_remove_periph(periph); 274 /* FALLTHROUGH */ 275 case 2: 276 xpt_lock_buses(); 277 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); 278 xpt_unlock_buses(); 279 xpt_free_path(periph->path); 280 /* FALLTHROUGH */ 281 case 1: 282 free(periph, M_CAMPERIPH); 283 /* FALLTHROUGH */ 284 case 0: 285 /* No cleanup to perform. */ 286 break; 287 default: 288 panic("%s: Unknown init level", __func__); 289 } 290 return(status); 291 } 292 293 /* 294 * Find a peripheral structure with the specified path, target, lun, 295 * and (optionally) type. If the name is NULL, this function will return 296 * the first peripheral driver that matches the specified path. 297 */ 298 struct cam_periph * 299 cam_periph_find(struct cam_path *path, char *name) 300 { 301 struct periph_driver **p_drv; 302 struct cam_periph *periph; 303 304 xpt_lock_buses(); 305 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 306 307 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) 308 continue; 309 310 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { 311 if (xpt_path_comp(periph->path, path) == 0) { 312 xpt_unlock_buses(); 313 cam_periph_assert(periph, MA_OWNED); 314 return(periph); 315 } 316 } 317 if (name != NULL) { 318 xpt_unlock_buses(); 319 return(NULL); 320 } 321 } 322 xpt_unlock_buses(); 323 return(NULL); 324 } 325 326 /* 327 * Find peripheral driver instances attached to the specified path. 328 */ 329 int 330 cam_periph_list(struct cam_path *path, struct sbuf *sb) 331 { 332 struct sbuf local_sb; 333 struct periph_driver **p_drv; 334 struct cam_periph *periph; 335 int count; 336 int sbuf_alloc_len; 337 338 sbuf_alloc_len = 16; 339 retry: 340 sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN); 341 count = 0; 342 xpt_lock_buses(); 343 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 344 345 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { 346 if (xpt_path_comp(periph->path, path) != 0) 347 continue; 348 349 if (sbuf_len(&local_sb) != 0) 350 sbuf_cat(&local_sb, ","); 351 352 sbuf_printf(&local_sb, "%s%d", periph->periph_name, 353 periph->unit_number); 354 355 if (sbuf_error(&local_sb) == ENOMEM) { 356 sbuf_alloc_len *= 2; 357 xpt_unlock_buses(); 358 sbuf_delete(&local_sb); 359 goto retry; 360 } 361 count++; 362 } 363 } 364 xpt_unlock_buses(); 365 sbuf_finish(&local_sb); 366 sbuf_cpy(sb, sbuf_data(&local_sb)); 367 sbuf_delete(&local_sb); 368 return (count); 369 } 370 371 cam_status 372 cam_periph_acquire(struct cam_periph *periph) 373 { 374 cam_status status; 375 376 status = CAM_REQ_CMP_ERR; 377 if (periph == NULL) 378 return (status); 379 380 xpt_lock_buses(); 381 if ((periph->flags & CAM_PERIPH_INVALID) == 0) { 382 periph->refcount++; 383 status = CAM_REQ_CMP; 384 } 385 xpt_unlock_buses(); 386 387 return (status); 388 } 389 390 void 391 cam_periph_doacquire(struct cam_periph *periph) 392 { 393 394 xpt_lock_buses(); 395 KASSERT(periph->refcount >= 1, 396 ("cam_periph_doacquire() with refcount == %d", periph->refcount)); 397 periph->refcount++; 398 xpt_unlock_buses(); 399 } 400 401 void 402 cam_periph_release_locked_buses(struct cam_periph *periph) 403 { 404 405 cam_periph_assert(periph, MA_OWNED); 406 KASSERT(periph->refcount >= 1, ("periph->refcount >= 1")); 407 if (--periph->refcount == 0) 408 camperiphfree(periph); 409 } 410 411 void 412 cam_periph_release_locked(struct cam_periph *periph) 413 { 414 415 if (periph == NULL) 416 return; 417 418 xpt_lock_buses(); 419 cam_periph_release_locked_buses(periph); 420 xpt_unlock_buses(); 421 } 422 423 void 424 cam_periph_release(struct cam_periph *periph) 425 { 426 struct mtx *mtx; 427 428 if (periph == NULL) 429 return; 430 431 cam_periph_assert(periph, MA_NOTOWNED); 432 mtx = cam_periph_mtx(periph); 433 mtx_lock(mtx); 434 cam_periph_release_locked(periph); 435 mtx_unlock(mtx); 436 } 437 438 int 439 cam_periph_hold(struct cam_periph *periph, int priority) 440 { 441 int error; 442 443 /* 444 * Increment the reference count on the peripheral 445 * while we wait for our lock attempt to succeed 446 * to ensure the peripheral doesn't disappear out 447 * from user us while we sleep. 448 */ 449 450 if (cam_periph_acquire(periph) != CAM_REQ_CMP) 451 return (ENXIO); 452 453 cam_periph_assert(periph, MA_OWNED); 454 while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { 455 periph->flags |= CAM_PERIPH_LOCK_WANTED; 456 if ((error = cam_periph_sleep(periph, periph, priority, 457 "caplck", 0)) != 0) { 458 cam_periph_release_locked(periph); 459 return (error); 460 } 461 if (periph->flags & CAM_PERIPH_INVALID) { 462 cam_periph_release_locked(periph); 463 return (ENXIO); 464 } 465 } 466 467 periph->flags |= CAM_PERIPH_LOCKED; 468 return (0); 469 } 470 471 void 472 cam_periph_unhold(struct cam_periph *periph) 473 { 474 475 cam_periph_assert(periph, MA_OWNED); 476 477 periph->flags &= ~CAM_PERIPH_LOCKED; 478 if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { 479 periph->flags &= ~CAM_PERIPH_LOCK_WANTED; 480 wakeup(periph); 481 } 482 483 cam_periph_release_locked(periph); 484 } 485 486 /* 487 * Look for the next unit number that is not currently in use for this 488 * peripheral type starting at "newunit". Also exclude unit numbers that 489 * are reserved by for future "hardwiring" unless we already know that this 490 * is a potential wired device. Only assume that the device is "wired" the 491 * first time through the loop since after that we'll be looking at unit 492 * numbers that did not match a wiring entry. 493 */ 494 static u_int 495 camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired, 496 path_id_t pathid, target_id_t target, lun_id_t lun) 497 { 498 struct cam_periph *periph; 499 char *periph_name; 500 int i, val, dunit, r; 501 const char *dname, *strval; 502 503 periph_name = p_drv->driver_name; 504 for (;;newunit++) { 505 506 for (periph = TAILQ_FIRST(&p_drv->units); 507 periph != NULL && periph->unit_number != newunit; 508 periph = TAILQ_NEXT(periph, unit_links)) 509 ; 510 511 if (periph != NULL && periph->unit_number == newunit) { 512 if (wired != 0) { 513 xpt_print(periph->path, "Duplicate Wired " 514 "Device entry!\n"); 515 xpt_print(periph->path, "Second device (%s " 516 "device at scbus%d target %d lun %d) will " 517 "not be wired\n", periph_name, pathid, 518 target, lun); 519 wired = 0; 520 } 521 continue; 522 } 523 if (wired) 524 break; 525 526 /* 527 * Don't match entries like "da 4" as a wired down 528 * device, but do match entries like "da 4 target 5" 529 * or even "da 4 scbus 1". 530 */ 531 i = 0; 532 dname = periph_name; 533 for (;;) { 534 r = resource_find_dev(&i, dname, &dunit, NULL, NULL); 535 if (r != 0) 536 break; 537 /* if no "target" and no specific scbus, skip */ 538 if (resource_int_value(dname, dunit, "target", &val) && 539 (resource_string_value(dname, dunit, "at",&strval)|| 540 strcmp(strval, "scbus") == 0)) 541 continue; 542 if (newunit == dunit) 543 break; 544 } 545 if (r != 0) 546 break; 547 } 548 return (newunit); 549 } 550 551 static u_int 552 camperiphunit(struct periph_driver *p_drv, path_id_t pathid, 553 target_id_t target, lun_id_t lun) 554 { 555 u_int unit; 556 int wired, i, val, dunit; 557 const char *dname, *strval; 558 char pathbuf[32], *periph_name; 559 560 periph_name = p_drv->driver_name; 561 snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid); 562 unit = 0; 563 i = 0; 564 dname = periph_name; 565 for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0; 566 wired = 0) { 567 if (resource_string_value(dname, dunit, "at", &strval) == 0) { 568 if (strcmp(strval, pathbuf) != 0) 569 continue; 570 wired++; 571 } 572 if (resource_int_value(dname, dunit, "target", &val) == 0) { 573 if (val != target) 574 continue; 575 wired++; 576 } 577 if (resource_int_value(dname, dunit, "lun", &val) == 0) { 578 if (val != lun) 579 continue; 580 wired++; 581 } 582 if (wired != 0) { 583 unit = dunit; 584 break; 585 } 586 } 587 588 /* 589 * Either start from 0 looking for the next unit or from 590 * the unit number given in the resource config. This way, 591 * if we have wildcard matches, we don't return the same 592 * unit number twice. 593 */ 594 unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun); 595 596 return (unit); 597 } 598 599 void 600 cam_periph_invalidate(struct cam_periph *periph) 601 { 602 603 cam_periph_assert(periph, MA_OWNED); 604 /* 605 * We only call this routine the first time a peripheral is 606 * invalidated. 607 */ 608 if ((periph->flags & CAM_PERIPH_INVALID) != 0) 609 return; 610 611 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n")); 612 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) 613 xpt_denounce_periph(periph); 614 periph->flags |= CAM_PERIPH_INVALID; 615 periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; 616 if (periph->periph_oninval != NULL) 617 periph->periph_oninval(periph); 618 cam_periph_release_locked(periph); 619 } 620 621 static void 622 camperiphfree(struct cam_periph *periph) 623 { 624 struct periph_driver **p_drv; 625 struct periph_driver *drv; 626 627 cam_periph_assert(periph, MA_OWNED); 628 KASSERT(periph->periph_allocating == 0, ("%s%d: freed while allocating", 629 periph->periph_name, periph->unit_number)); 630 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 631 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) 632 break; 633 } 634 if (*p_drv == NULL) { 635 printf("camperiphfree: attempt to free non-existant periph\n"); 636 return; 637 } 638 /* 639 * Cache a pointer to the periph_driver structure. If a 640 * periph_driver is added or removed from the array (see 641 * periphdriver_register()) while we drop the toplogy lock 642 * below, p_drv may change. This doesn't protect against this 643 * particular periph_driver going away. That will require full 644 * reference counting in the periph_driver infrastructure. 645 */ 646 drv = *p_drv; 647 648 /* 649 * We need to set this flag before dropping the topology lock, to 650 * let anyone who is traversing the list that this peripheral is 651 * about to be freed, and there will be no more reference count 652 * checks. 653 */ 654 periph->flags |= CAM_PERIPH_FREE; 655 656 /* 657 * The peripheral destructor semantics dictate calling with only the 658 * SIM mutex held. Since it might sleep, it should not be called 659 * with the topology lock held. 660 */ 661 xpt_unlock_buses(); 662 663 /* 664 * We need to call the peripheral destructor prior to removing the 665 * peripheral from the list. Otherwise, we risk running into a 666 * scenario where the peripheral unit number may get reused 667 * (because it has been removed from the list), but some resources 668 * used by the peripheral are still hanging around. In particular, 669 * the devfs nodes used by some peripherals like the pass(4) driver 670 * aren't fully cleaned up until the destructor is run. If the 671 * unit number is reused before the devfs instance is fully gone, 672 * devfs will panic. 673 */ 674 if (periph->periph_dtor != NULL) 675 periph->periph_dtor(periph); 676 677 /* 678 * The peripheral list is protected by the topology lock. 679 */ 680 xpt_lock_buses(); 681 682 TAILQ_REMOVE(&drv->units, periph, unit_links); 683 drv->generation++; 684 685 xpt_remove_periph(periph); 686 687 xpt_unlock_buses(); 688 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) 689 xpt_print(periph->path, "Periph destroyed\n"); 690 else 691 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); 692 693 if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { 694 union ccb ccb; 695 void *arg; 696 697 switch (periph->deferred_ac) { 698 case AC_FOUND_DEVICE: 699 ccb.ccb_h.func_code = XPT_GDEV_TYPE; 700 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 701 xpt_action(&ccb); 702 arg = &ccb; 703 break; 704 case AC_PATH_REGISTERED: 705 ccb.ccb_h.func_code = XPT_PATH_INQ; 706 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 707 xpt_action(&ccb); 708 arg = &ccb; 709 break; 710 default: 711 arg = NULL; 712 break; 713 } 714 periph->deferred_callback(NULL, periph->deferred_ac, 715 periph->path, arg); 716 } 717 xpt_free_path(periph->path); 718 free(periph, M_CAMPERIPH); 719 xpt_lock_buses(); 720 } 721 722 /* 723 * Map user virtual pointers into kernel virtual address space, so we can 724 * access the memory. This is now a generic function that centralizes most 725 * of the sanity checks on the data flags, if any. 726 * This also only works for up to MAXPHYS memory. Since we use 727 * buffers to map stuff in and out, we're limited to the buffer size. 728 */ 729 int 730 cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo, 731 u_int maxmap) 732 { 733 int numbufs, i, j; 734 int flags[CAM_PERIPH_MAXMAPS]; 735 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 736 u_int32_t lengths[CAM_PERIPH_MAXMAPS]; 737 u_int32_t dirs[CAM_PERIPH_MAXMAPS]; 738 739 if (maxmap == 0) 740 maxmap = DFLTPHYS; /* traditional default */ 741 else if (maxmap > MAXPHYS) 742 maxmap = MAXPHYS; /* for safety */ 743 switch(ccb->ccb_h.func_code) { 744 case XPT_DEV_MATCH: 745 if (ccb->cdm.match_buf_len == 0) { 746 printf("cam_periph_mapmem: invalid match buffer " 747 "length 0\n"); 748 return(EINVAL); 749 } 750 if (ccb->cdm.pattern_buf_len > 0) { 751 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 752 lengths[0] = ccb->cdm.pattern_buf_len; 753 dirs[0] = CAM_DIR_OUT; 754 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 755 lengths[1] = ccb->cdm.match_buf_len; 756 dirs[1] = CAM_DIR_IN; 757 numbufs = 2; 758 } else { 759 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 760 lengths[0] = ccb->cdm.match_buf_len; 761 dirs[0] = CAM_DIR_IN; 762 numbufs = 1; 763 } 764 /* 765 * This request will not go to the hardware, no reason 766 * to be so strict. vmapbuf() is able to map up to MAXPHYS. 767 */ 768 maxmap = MAXPHYS; 769 break; 770 case XPT_SCSI_IO: 771 case XPT_CONT_TARGET_IO: 772 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 773 return(0); 774 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) 775 return (EINVAL); 776 data_ptrs[0] = &ccb->csio.data_ptr; 777 lengths[0] = ccb->csio.dxfer_len; 778 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 779 numbufs = 1; 780 break; 781 case XPT_ATA_IO: 782 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 783 return(0); 784 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) 785 return (EINVAL); 786 data_ptrs[0] = &ccb->ataio.data_ptr; 787 lengths[0] = ccb->ataio.dxfer_len; 788 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 789 numbufs = 1; 790 break; 791 case XPT_SMP_IO: 792 data_ptrs[0] = &ccb->smpio.smp_request; 793 lengths[0] = ccb->smpio.smp_request_len; 794 dirs[0] = CAM_DIR_OUT; 795 data_ptrs[1] = &ccb->smpio.smp_response; 796 lengths[1] = ccb->smpio.smp_response_len; 797 dirs[1] = CAM_DIR_IN; 798 numbufs = 2; 799 break; 800 case XPT_DEV_ADVINFO: 801 if (ccb->cdai.bufsiz == 0) 802 return (0); 803 804 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; 805 lengths[0] = ccb->cdai.bufsiz; 806 dirs[0] = CAM_DIR_IN; 807 numbufs = 1; 808 809 /* 810 * This request will not go to the hardware, no reason 811 * to be so strict. vmapbuf() is able to map up to MAXPHYS. 812 */ 813 maxmap = MAXPHYS; 814 break; 815 default: 816 return(EINVAL); 817 break; /* NOTREACHED */ 818 } 819 820 /* 821 * Check the transfer length and permissions first, so we don't 822 * have to unmap any previously mapped buffers. 823 */ 824 for (i = 0; i < numbufs; i++) { 825 826 flags[i] = 0; 827 828 /* 829 * The userland data pointer passed in may not be page 830 * aligned. vmapbuf() truncates the address to a page 831 * boundary, so if the address isn't page aligned, we'll 832 * need enough space for the given transfer length, plus 833 * whatever extra space is necessary to make it to the page 834 * boundary. 835 */ 836 if ((lengths[i] + 837 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > maxmap){ 838 printf("cam_periph_mapmem: attempt to map %lu bytes, " 839 "which is greater than %lu\n", 840 (long)(lengths[i] + 841 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)), 842 (u_long)maxmap); 843 return(E2BIG); 844 } 845 846 if (dirs[i] & CAM_DIR_OUT) { 847 flags[i] = BIO_WRITE; 848 } 849 850 if (dirs[i] & CAM_DIR_IN) { 851 flags[i] = BIO_READ; 852 } 853 854 } 855 856 /* 857 * This keeps the the kernel stack of current thread from getting 858 * swapped. In low-memory situations where the kernel stack might 859 * otherwise get swapped out, this holds it and allows the thread 860 * to make progress and release the kernel mapped pages sooner. 861 * 862 * XXX KDM should I use P_NOSWAP instead? 863 */ 864 PHOLD(curproc); 865 866 for (i = 0; i < numbufs; i++) { 867 /* 868 * Get the buffer. 869 */ 870 mapinfo->bp[i] = getpbuf(NULL); 871 872 /* save the buffer's data address */ 873 mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data; 874 875 /* put our pointer in the data slot */ 876 mapinfo->bp[i]->b_data = *data_ptrs[i]; 877 878 /* set the transfer length, we know it's < MAXPHYS */ 879 mapinfo->bp[i]->b_bufsize = lengths[i]; 880 881 /* set the direction */ 882 mapinfo->bp[i]->b_iocmd = flags[i]; 883 884 /* 885 * Map the buffer into kernel memory. 886 * 887 * Note that useracc() alone is not a sufficient test. 888 * vmapbuf() can still fail due to a smaller file mapped 889 * into a larger area of VM, or if userland races against 890 * vmapbuf() after the useracc() check. 891 */ 892 if (vmapbuf(mapinfo->bp[i], 1) < 0) { 893 for (j = 0; j < i; ++j) { 894 *data_ptrs[j] = mapinfo->bp[j]->b_saveaddr; 895 vunmapbuf(mapinfo->bp[j]); 896 relpbuf(mapinfo->bp[j], NULL); 897 } 898 relpbuf(mapinfo->bp[i], NULL); 899 PRELE(curproc); 900 return(EACCES); 901 } 902 903 /* set our pointer to the new mapped area */ 904 *data_ptrs[i] = mapinfo->bp[i]->b_data; 905 906 mapinfo->num_bufs_used++; 907 } 908 909 /* 910 * Now that we've gotten this far, change ownership to the kernel 911 * of the buffers so that we don't run afoul of returning to user 912 * space with locks (on the buffer) held. 913 */ 914 for (i = 0; i < numbufs; i++) { 915 BUF_KERNPROC(mapinfo->bp[i]); 916 } 917 918 919 return(0); 920 } 921 922 /* 923 * Unmap memory segments mapped into kernel virtual address space by 924 * cam_periph_mapmem(). 925 */ 926 void 927 cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) 928 { 929 int numbufs, i; 930 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 931 932 if (mapinfo->num_bufs_used <= 0) { 933 /* nothing to free and the process wasn't held. */ 934 return; 935 } 936 937 switch (ccb->ccb_h.func_code) { 938 case XPT_DEV_MATCH: 939 numbufs = min(mapinfo->num_bufs_used, 2); 940 941 if (numbufs == 1) { 942 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 943 } else { 944 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 945 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 946 } 947 break; 948 case XPT_SCSI_IO: 949 case XPT_CONT_TARGET_IO: 950 data_ptrs[0] = &ccb->csio.data_ptr; 951 numbufs = min(mapinfo->num_bufs_used, 1); 952 break; 953 case XPT_ATA_IO: 954 data_ptrs[0] = &ccb->ataio.data_ptr; 955 numbufs = min(mapinfo->num_bufs_used, 1); 956 break; 957 case XPT_SMP_IO: 958 numbufs = min(mapinfo->num_bufs_used, 2); 959 data_ptrs[0] = &ccb->smpio.smp_request; 960 data_ptrs[1] = &ccb->smpio.smp_response; 961 break; 962 case XPT_DEV_ADVINFO: 963 numbufs = min(mapinfo->num_bufs_used, 1); 964 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; 965 break; 966 default: 967 /* allow ourselves to be swapped once again */ 968 PRELE(curproc); 969 return; 970 break; /* NOTREACHED */ 971 } 972 973 for (i = 0; i < numbufs; i++) { 974 /* Set the user's pointer back to the original value */ 975 *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr; 976 977 /* unmap the buffer */ 978 vunmapbuf(mapinfo->bp[i]); 979 980 /* release the buffer */ 981 relpbuf(mapinfo->bp[i], NULL); 982 } 983 984 /* allow ourselves to be swapped once again */ 985 PRELE(curproc); 986 } 987 988 void 989 cam_periph_ccbwait(union ccb *ccb) 990 { 991 992 if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX) 993 || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)) 994 xpt_path_sleep(ccb->ccb_h.path, &ccb->ccb_h.cbfcnp, PRIBIO, 995 "cbwait", 0); 996 } 997 998 int 999 cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, 1000 int (*error_routine)(union ccb *ccb, 1001 cam_flags camflags, 1002 u_int32_t sense_flags)) 1003 { 1004 union ccb *ccb; 1005 int error; 1006 int found; 1007 1008 error = found = 0; 1009 1010 switch(cmd){ 1011 case CAMGETPASSTHRU: 1012 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 1013 xpt_setup_ccb(&ccb->ccb_h, 1014 ccb->ccb_h.path, 1015 CAM_PRIORITY_NORMAL); 1016 ccb->ccb_h.func_code = XPT_GDEVLIST; 1017 1018 /* 1019 * Basically, the point of this is that we go through 1020 * getting the list of devices, until we find a passthrough 1021 * device. In the current version of the CAM code, the 1022 * only way to determine what type of device we're dealing 1023 * with is by its name. 1024 */ 1025 while (found == 0) { 1026 ccb->cgdl.index = 0; 1027 ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; 1028 while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { 1029 1030 /* we want the next device in the list */ 1031 xpt_action(ccb); 1032 if (strncmp(ccb->cgdl.periph_name, 1033 "pass", 4) == 0){ 1034 found = 1; 1035 break; 1036 } 1037 } 1038 if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && 1039 (found == 0)) { 1040 ccb->cgdl.periph_name[0] = '\0'; 1041 ccb->cgdl.unit_number = 0; 1042 break; 1043 } 1044 } 1045 1046 /* copy the result back out */ 1047 bcopy(ccb, addr, sizeof(union ccb)); 1048 1049 /* and release the ccb */ 1050 xpt_release_ccb(ccb); 1051 1052 break; 1053 default: 1054 error = ENOTTY; 1055 break; 1056 } 1057 return(error); 1058 } 1059 1060 static void 1061 cam_periph_done(struct cam_periph *periph, union ccb *done_ccb) 1062 { 1063 1064 /* Caller will release the CCB */ 1065 wakeup(&done_ccb->ccb_h.cbfcnp); 1066 } 1067 1068 int 1069 cam_periph_runccb(union ccb *ccb, 1070 int (*error_routine)(union ccb *ccb, 1071 cam_flags camflags, 1072 u_int32_t sense_flags), 1073 cam_flags camflags, u_int32_t sense_flags, 1074 struct devstat *ds) 1075 { 1076 struct bintime *starttime; 1077 struct bintime ltime; 1078 int error; 1079 1080 starttime = NULL; 1081 xpt_path_assert(ccb->ccb_h.path, MA_OWNED); 1082 1083 /* 1084 * If the user has supplied a stats structure, and if we understand 1085 * this particular type of ccb, record the transaction start. 1086 */ 1087 if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO || 1088 ccb->ccb_h.func_code == XPT_ATA_IO)) { 1089 starttime = <ime; 1090 binuptime(starttime); 1091 devstat_start_transaction(ds, starttime); 1092 } 1093 1094 ccb->ccb_h.cbfcnp = cam_periph_done; 1095 xpt_action(ccb); 1096 1097 do { 1098 cam_periph_ccbwait(ccb); 1099 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) 1100 error = 0; 1101 else if (error_routine != NULL) 1102 error = (*error_routine)(ccb, camflags, sense_flags); 1103 else 1104 error = 0; 1105 1106 } while (error == ERESTART); 1107 1108 if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { 1109 cam_release_devq(ccb->ccb_h.path, 1110 /* relsim_flags */0, 1111 /* openings */0, 1112 /* timeout */0, 1113 /* getcount_only */ FALSE); 1114 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1115 } 1116 1117 if (ds != NULL) { 1118 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1119 devstat_end_transaction(ds, 1120 ccb->csio.dxfer_len - ccb->csio.resid, 1121 ccb->csio.tag_action & 0x3, 1122 ((ccb->ccb_h.flags & CAM_DIR_MASK) == 1123 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 1124 (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1125 DEVSTAT_WRITE : 1126 DEVSTAT_READ, NULL, starttime); 1127 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1128 devstat_end_transaction(ds, 1129 ccb->ataio.dxfer_len - ccb->ataio.resid, 1130 ccb->ataio.tag_action & 0x3, 1131 ((ccb->ccb_h.flags & CAM_DIR_MASK) == 1132 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 1133 (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1134 DEVSTAT_WRITE : 1135 DEVSTAT_READ, NULL, starttime); 1136 } 1137 } 1138 1139 return(error); 1140 } 1141 1142 void 1143 cam_freeze_devq(struct cam_path *path) 1144 { 1145 struct ccb_hdr ccb_h; 1146 1147 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_freeze_devq\n")); 1148 xpt_setup_ccb(&ccb_h, path, /*priority*/1); 1149 ccb_h.func_code = XPT_NOOP; 1150 ccb_h.flags = CAM_DEV_QFREEZE; 1151 xpt_action((union ccb *)&ccb_h); 1152 } 1153 1154 u_int32_t 1155 cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, 1156 u_int32_t openings, u_int32_t arg, 1157 int getcount_only) 1158 { 1159 struct ccb_relsim crs; 1160 1161 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_release_devq(%u, %u, %u, %d)\n", 1162 relsim_flags, openings, arg, getcount_only)); 1163 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); 1164 crs.ccb_h.func_code = XPT_REL_SIMQ; 1165 crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; 1166 crs.release_flags = relsim_flags; 1167 crs.openings = openings; 1168 crs.release_timeout = arg; 1169 xpt_action((union ccb *)&crs); 1170 return (crs.qfrozen_cnt); 1171 } 1172 1173 #define saved_ccb_ptr ppriv_ptr0 1174 static void 1175 camperiphdone(struct cam_periph *periph, union ccb *done_ccb) 1176 { 1177 union ccb *saved_ccb; 1178 cam_status status; 1179 struct scsi_start_stop_unit *scsi_cmd; 1180 int error_code, sense_key, asc, ascq; 1181 1182 scsi_cmd = (struct scsi_start_stop_unit *) 1183 &done_ccb->csio.cdb_io.cdb_bytes; 1184 status = done_ccb->ccb_h.status; 1185 1186 if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 1187 if (scsi_extract_sense_ccb(done_ccb, 1188 &error_code, &sense_key, &asc, &ascq)) { 1189 /* 1190 * If the error is "invalid field in CDB", 1191 * and the load/eject flag is set, turn the 1192 * flag off and try again. This is just in 1193 * case the drive in question barfs on the 1194 * load eject flag. The CAM code should set 1195 * the load/eject flag by default for 1196 * removable media. 1197 */ 1198 if ((scsi_cmd->opcode == START_STOP_UNIT) && 1199 ((scsi_cmd->how & SSS_LOEJ) != 0) && 1200 (asc == 0x24) && (ascq == 0x00)) { 1201 scsi_cmd->how &= ~SSS_LOEJ; 1202 if (status & CAM_DEV_QFRZN) { 1203 cam_release_devq(done_ccb->ccb_h.path, 1204 0, 0, 0, 0); 1205 done_ccb->ccb_h.status &= 1206 ~CAM_DEV_QFRZN; 1207 } 1208 xpt_action(done_ccb); 1209 goto out; 1210 } 1211 } 1212 if (cam_periph_error(done_ccb, 1213 0, SF_RETRY_UA | SF_NO_PRINT, NULL) == ERESTART) 1214 goto out; 1215 if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) { 1216 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); 1217 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1218 } 1219 } else { 1220 /* 1221 * If we have successfully taken a device from the not 1222 * ready to ready state, re-scan the device and re-get 1223 * the inquiry information. Many devices (mostly disks) 1224 * don't properly report their inquiry information unless 1225 * they are spun up. 1226 */ 1227 if (scsi_cmd->opcode == START_STOP_UNIT) 1228 xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL); 1229 } 1230 1231 /* 1232 * Perform the final retry with the original CCB so that final 1233 * error processing is performed by the owner of the CCB. 1234 */ 1235 saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr; 1236 bcopy(saved_ccb, done_ccb, sizeof(*done_ccb)); 1237 xpt_free_ccb(saved_ccb); 1238 if (done_ccb->ccb_h.cbfcnp != camperiphdone) 1239 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 1240 xpt_action(done_ccb); 1241 1242 out: 1243 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ 1244 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); 1245 } 1246 1247 /* 1248 * Generic Async Event handler. Peripheral drivers usually 1249 * filter out the events that require personal attention, 1250 * and leave the rest to this function. 1251 */ 1252 void 1253 cam_periph_async(struct cam_periph *periph, u_int32_t code, 1254 struct cam_path *path, void *arg) 1255 { 1256 switch (code) { 1257 case AC_LOST_DEVICE: 1258 cam_periph_invalidate(periph); 1259 break; 1260 default: 1261 break; 1262 } 1263 } 1264 1265 void 1266 cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) 1267 { 1268 struct ccb_getdevstats cgds; 1269 1270 xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 1271 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1272 xpt_action((union ccb *)&cgds); 1273 cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); 1274 } 1275 1276 void 1277 cam_periph_freeze_after_event(struct cam_periph *periph, 1278 struct timeval* event_time, u_int duration_ms) 1279 { 1280 struct timeval delta; 1281 struct timeval duration_tv; 1282 1283 if (!timevalisset(event_time)) 1284 return; 1285 1286 microtime(&delta); 1287 timevalsub(&delta, event_time); 1288 duration_tv.tv_sec = duration_ms / 1000; 1289 duration_tv.tv_usec = (duration_ms % 1000) * 1000; 1290 if (timevalcmp(&delta, &duration_tv, <)) { 1291 timevalsub(&duration_tv, &delta); 1292 1293 duration_ms = duration_tv.tv_sec * 1000; 1294 duration_ms += duration_tv.tv_usec / 1000; 1295 cam_freeze_devq(periph->path); 1296 cam_release_devq(periph->path, 1297 RELSIM_RELEASE_AFTER_TIMEOUT, 1298 /*reduction*/0, 1299 /*timeout*/duration_ms, 1300 /*getcount_only*/0); 1301 } 1302 1303 } 1304 1305 static int 1306 camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, 1307 cam_flags camflags, u_int32_t sense_flags, 1308 int *openings, u_int32_t *relsim_flags, 1309 u_int32_t *timeout, u_int32_t *action, const char **action_string) 1310 { 1311 int error; 1312 1313 switch (ccb->csio.scsi_status) { 1314 case SCSI_STATUS_OK: 1315 case SCSI_STATUS_COND_MET: 1316 case SCSI_STATUS_INTERMED: 1317 case SCSI_STATUS_INTERMED_COND_MET: 1318 error = 0; 1319 break; 1320 case SCSI_STATUS_CMD_TERMINATED: 1321 case SCSI_STATUS_CHECK_COND: 1322 error = camperiphscsisenseerror(ccb, orig_ccb, 1323 camflags, 1324 sense_flags, 1325 openings, 1326 relsim_flags, 1327 timeout, 1328 action, 1329 action_string); 1330 break; 1331 case SCSI_STATUS_QUEUE_FULL: 1332 { 1333 /* no decrement */ 1334 struct ccb_getdevstats cgds; 1335 1336 /* 1337 * First off, find out what the current 1338 * transaction counts are. 1339 */ 1340 xpt_setup_ccb(&cgds.ccb_h, 1341 ccb->ccb_h.path, 1342 CAM_PRIORITY_NORMAL); 1343 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1344 xpt_action((union ccb *)&cgds); 1345 1346 /* 1347 * If we were the only transaction active, treat 1348 * the QUEUE FULL as if it were a BUSY condition. 1349 */ 1350 if (cgds.dev_active != 0) { 1351 int total_openings; 1352 1353 /* 1354 * Reduce the number of openings to 1355 * be 1 less than the amount it took 1356 * to get a queue full bounded by the 1357 * minimum allowed tag count for this 1358 * device. 1359 */ 1360 total_openings = cgds.dev_active + cgds.dev_openings; 1361 *openings = cgds.dev_active; 1362 if (*openings < cgds.mintags) 1363 *openings = cgds.mintags; 1364 if (*openings < total_openings) 1365 *relsim_flags = RELSIM_ADJUST_OPENINGS; 1366 else { 1367 /* 1368 * Some devices report queue full for 1369 * temporary resource shortages. For 1370 * this reason, we allow a minimum 1371 * tag count to be entered via a 1372 * quirk entry to prevent the queue 1373 * count on these devices from falling 1374 * to a pessimisticly low value. We 1375 * still wait for the next successful 1376 * completion, however, before queueing 1377 * more transactions to the device. 1378 */ 1379 *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT; 1380 } 1381 *timeout = 0; 1382 error = ERESTART; 1383 *action &= ~SSQ_PRINT_SENSE; 1384 break; 1385 } 1386 /* FALLTHROUGH */ 1387 } 1388 case SCSI_STATUS_BUSY: 1389 /* 1390 * Restart the queue after either another 1391 * command completes or a 1 second timeout. 1392 */ 1393 if ((sense_flags & SF_RETRY_BUSY) != 0 || 1394 (ccb->ccb_h.retry_count--) > 0) { 1395 error = ERESTART; 1396 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT 1397 | RELSIM_RELEASE_AFTER_CMDCMPLT; 1398 *timeout = 1000; 1399 } else { 1400 error = EIO; 1401 } 1402 break; 1403 case SCSI_STATUS_RESERV_CONFLICT: 1404 default: 1405 error = EIO; 1406 break; 1407 } 1408 return (error); 1409 } 1410 1411 static int 1412 camperiphscsisenseerror(union ccb *ccb, union ccb **orig, 1413 cam_flags camflags, u_int32_t sense_flags, 1414 int *openings, u_int32_t *relsim_flags, 1415 u_int32_t *timeout, u_int32_t *action, const char **action_string) 1416 { 1417 struct cam_periph *periph; 1418 union ccb *orig_ccb = ccb; 1419 int error, recoveryccb; 1420 1421 periph = xpt_path_periph(ccb->ccb_h.path); 1422 recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone); 1423 if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) { 1424 /* 1425 * If error recovery is already in progress, don't attempt 1426 * to process this error, but requeue it unconditionally 1427 * and attempt to process it once error recovery has 1428 * completed. This failed command is probably related to 1429 * the error that caused the currently active error recovery 1430 * action so our current recovery efforts should also 1431 * address this command. Be aware that the error recovery 1432 * code assumes that only one recovery action is in progress 1433 * on a particular peripheral instance at any given time 1434 * (e.g. only one saved CCB for error recovery) so it is 1435 * imperitive that we don't violate this assumption. 1436 */ 1437 error = ERESTART; 1438 *action &= ~SSQ_PRINT_SENSE; 1439 } else { 1440 scsi_sense_action err_action; 1441 struct ccb_getdev cgd; 1442 1443 /* 1444 * Grab the inquiry data for this device. 1445 */ 1446 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); 1447 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 1448 xpt_action((union ccb *)&cgd); 1449 1450 err_action = scsi_error_action(&ccb->csio, &cgd.inq_data, 1451 sense_flags); 1452 error = err_action & SS_ERRMASK; 1453 1454 /* 1455 * Do not autostart sequential access devices 1456 * to avoid unexpected tape loading. 1457 */ 1458 if ((err_action & SS_MASK) == SS_START && 1459 SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) { 1460 *action_string = "Will not autostart a " 1461 "sequential access device"; 1462 goto sense_error_done; 1463 } 1464 1465 /* 1466 * Avoid recovery recursion if recovery action is the same. 1467 */ 1468 if ((err_action & SS_MASK) >= SS_START && recoveryccb) { 1469 if (((err_action & SS_MASK) == SS_START && 1470 ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) || 1471 ((err_action & SS_MASK) == SS_TUR && 1472 (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) { 1473 err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO; 1474 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1475 *timeout = 500; 1476 } 1477 } 1478 1479 /* 1480 * If the recovery action will consume a retry, 1481 * make sure we actually have retries available. 1482 */ 1483 if ((err_action & SSQ_DECREMENT_COUNT) != 0) { 1484 if (ccb->ccb_h.retry_count > 0 && 1485 (periph->flags & CAM_PERIPH_INVALID) == 0) 1486 ccb->ccb_h.retry_count--; 1487 else { 1488 *action_string = "Retries exhausted"; 1489 goto sense_error_done; 1490 } 1491 } 1492 1493 if ((err_action & SS_MASK) >= SS_START) { 1494 /* 1495 * Do common portions of commands that 1496 * use recovery CCBs. 1497 */ 1498 orig_ccb = xpt_alloc_ccb_nowait(); 1499 if (orig_ccb == NULL) { 1500 *action_string = "Can't allocate recovery CCB"; 1501 goto sense_error_done; 1502 } 1503 /* 1504 * Clear freeze flag for original request here, as 1505 * this freeze will be dropped as part of ERESTART. 1506 */ 1507 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1508 bcopy(ccb, orig_ccb, sizeof(*orig_ccb)); 1509 } 1510 1511 switch (err_action & SS_MASK) { 1512 case SS_NOP: 1513 *action_string = "No recovery action needed"; 1514 error = 0; 1515 break; 1516 case SS_RETRY: 1517 *action_string = "Retrying command (per sense data)"; 1518 error = ERESTART; 1519 break; 1520 case SS_FAIL: 1521 *action_string = "Unretryable error"; 1522 break; 1523 case SS_START: 1524 { 1525 int le; 1526 1527 /* 1528 * Send a start unit command to the device, and 1529 * then retry the command. 1530 */ 1531 *action_string = "Attempting to start unit"; 1532 periph->flags |= CAM_PERIPH_RECOVERY_INPROG; 1533 1534 /* 1535 * Check for removable media and set 1536 * load/eject flag appropriately. 1537 */ 1538 if (SID_IS_REMOVABLE(&cgd.inq_data)) 1539 le = TRUE; 1540 else 1541 le = FALSE; 1542 1543 scsi_start_stop(&ccb->csio, 1544 /*retries*/1, 1545 camperiphdone, 1546 MSG_SIMPLE_Q_TAG, 1547 /*start*/TRUE, 1548 /*load/eject*/le, 1549 /*immediate*/FALSE, 1550 SSD_FULL_SIZE, 1551 /*timeout*/50000); 1552 break; 1553 } 1554 case SS_TUR: 1555 { 1556 /* 1557 * Send a Test Unit Ready to the device. 1558 * If the 'many' flag is set, we send 120 1559 * test unit ready commands, one every half 1560 * second. Otherwise, we just send one TUR. 1561 * We only want to do this if the retry 1562 * count has not been exhausted. 1563 */ 1564 int retries; 1565 1566 if ((err_action & SSQ_MANY) != 0) { 1567 *action_string = "Polling device for readiness"; 1568 retries = 120; 1569 } else { 1570 *action_string = "Testing device for readiness"; 1571 retries = 1; 1572 } 1573 periph->flags |= CAM_PERIPH_RECOVERY_INPROG; 1574 scsi_test_unit_ready(&ccb->csio, 1575 retries, 1576 camperiphdone, 1577 MSG_SIMPLE_Q_TAG, 1578 SSD_FULL_SIZE, 1579 /*timeout*/5000); 1580 1581 /* 1582 * Accomplish our 500ms delay by deferring 1583 * the release of our device queue appropriately. 1584 */ 1585 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1586 *timeout = 500; 1587 break; 1588 } 1589 default: 1590 panic("Unhandled error action %x", err_action); 1591 } 1592 1593 if ((err_action & SS_MASK) >= SS_START) { 1594 /* 1595 * Drop the priority, so that the recovery 1596 * CCB is the first to execute. Freeze the queue 1597 * after this command is sent so that we can 1598 * restore the old csio and have it queued in 1599 * the proper order before we release normal 1600 * transactions to the device. 1601 */ 1602 ccb->ccb_h.pinfo.priority--; 1603 ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 1604 ccb->ccb_h.saved_ccb_ptr = orig_ccb; 1605 error = ERESTART; 1606 *orig = orig_ccb; 1607 } 1608 1609 sense_error_done: 1610 *action = err_action; 1611 } 1612 return (error); 1613 } 1614 1615 /* 1616 * Generic error handler. Peripheral drivers usually filter 1617 * out the errors that they handle in a unique manner, then 1618 * call this function. 1619 */ 1620 int 1621 cam_periph_error(union ccb *ccb, cam_flags camflags, 1622 u_int32_t sense_flags, union ccb *save_ccb) 1623 { 1624 struct cam_path *newpath; 1625 union ccb *orig_ccb, *scan_ccb; 1626 struct cam_periph *periph; 1627 const char *action_string; 1628 cam_status status; 1629 int frozen, error, openings, devctl_err; 1630 u_int32_t action, relsim_flags, timeout; 1631 1632 action = SSQ_PRINT_SENSE; 1633 periph = xpt_path_periph(ccb->ccb_h.path); 1634 action_string = NULL; 1635 status = ccb->ccb_h.status; 1636 frozen = (status & CAM_DEV_QFRZN) != 0; 1637 status &= CAM_STATUS_MASK; 1638 devctl_err = openings = relsim_flags = timeout = 0; 1639 orig_ccb = ccb; 1640 1641 /* Filter the errors that should be reported via devctl */ 1642 switch (ccb->ccb_h.status & CAM_STATUS_MASK) { 1643 case CAM_CMD_TIMEOUT: 1644 case CAM_REQ_ABORTED: 1645 case CAM_REQ_CMP_ERR: 1646 case CAM_REQ_TERMIO: 1647 case CAM_UNREC_HBA_ERROR: 1648 case CAM_DATA_RUN_ERR: 1649 case CAM_SCSI_STATUS_ERROR: 1650 case CAM_ATA_STATUS_ERROR: 1651 case CAM_SMP_STATUS_ERROR: 1652 devctl_err++; 1653 break; 1654 default: 1655 break; 1656 } 1657 1658 switch (status) { 1659 case CAM_REQ_CMP: 1660 error = 0; 1661 action &= ~SSQ_PRINT_SENSE; 1662 break; 1663 case CAM_SCSI_STATUS_ERROR: 1664 error = camperiphscsistatuserror(ccb, &orig_ccb, 1665 camflags, sense_flags, &openings, &relsim_flags, 1666 &timeout, &action, &action_string); 1667 break; 1668 case CAM_AUTOSENSE_FAIL: 1669 error = EIO; /* we have to kill the command */ 1670 break; 1671 case CAM_UA_ABORT: 1672 case CAM_UA_TERMIO: 1673 case CAM_MSG_REJECT_REC: 1674 /* XXX Don't know that these are correct */ 1675 error = EIO; 1676 break; 1677 case CAM_SEL_TIMEOUT: 1678 if ((camflags & CAM_RETRY_SELTO) != 0) { 1679 if (ccb->ccb_h.retry_count > 0 && 1680 (periph->flags & CAM_PERIPH_INVALID) == 0) { 1681 ccb->ccb_h.retry_count--; 1682 error = ERESTART; 1683 1684 /* 1685 * Wait a bit to give the device 1686 * time to recover before we try again. 1687 */ 1688 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1689 timeout = periph_selto_delay; 1690 break; 1691 } 1692 action_string = "Retries exhausted"; 1693 } 1694 /* FALLTHROUGH */ 1695 case CAM_DEV_NOT_THERE: 1696 error = ENXIO; 1697 action = SSQ_LOST; 1698 break; 1699 case CAM_REQ_INVALID: 1700 case CAM_PATH_INVALID: 1701 case CAM_NO_HBA: 1702 case CAM_PROVIDE_FAIL: 1703 case CAM_REQ_TOO_BIG: 1704 case CAM_LUN_INVALID: 1705 case CAM_TID_INVALID: 1706 case CAM_FUNC_NOTAVAIL: 1707 error = EINVAL; 1708 break; 1709 case CAM_SCSI_BUS_RESET: 1710 case CAM_BDR_SENT: 1711 /* 1712 * Commands that repeatedly timeout and cause these 1713 * kinds of error recovery actions, should return 1714 * CAM_CMD_TIMEOUT, which allows us to safely assume 1715 * that this command was an innocent bystander to 1716 * these events and should be unconditionally 1717 * retried. 1718 */ 1719 case CAM_REQUEUE_REQ: 1720 /* Unconditional requeue if device is still there */ 1721 if (periph->flags & CAM_PERIPH_INVALID) { 1722 action_string = "Periph was invalidated"; 1723 error = EIO; 1724 } else if (sense_flags & SF_NO_RETRY) { 1725 error = EIO; 1726 action_string = "Retry was blocked"; 1727 } else { 1728 error = ERESTART; 1729 action &= ~SSQ_PRINT_SENSE; 1730 } 1731 break; 1732 case CAM_RESRC_UNAVAIL: 1733 /* Wait a bit for the resource shortage to abate. */ 1734 timeout = periph_noresrc_delay; 1735 /* FALLTHROUGH */ 1736 case CAM_BUSY: 1737 if (timeout == 0) { 1738 /* Wait a bit for the busy condition to abate. */ 1739 timeout = periph_busy_delay; 1740 } 1741 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1742 /* FALLTHROUGH */ 1743 case CAM_ATA_STATUS_ERROR: 1744 case CAM_REQ_CMP_ERR: 1745 case CAM_CMD_TIMEOUT: 1746 case CAM_UNEXP_BUSFREE: 1747 case CAM_UNCOR_PARITY: 1748 case CAM_DATA_RUN_ERR: 1749 default: 1750 if (periph->flags & CAM_PERIPH_INVALID) { 1751 error = EIO; 1752 action_string = "Periph was invalidated"; 1753 } else if (ccb->ccb_h.retry_count == 0) { 1754 error = EIO; 1755 action_string = "Retries exhausted"; 1756 } else if (sense_flags & SF_NO_RETRY) { 1757 error = EIO; 1758 action_string = "Retry was blocked"; 1759 } else { 1760 ccb->ccb_h.retry_count--; 1761 error = ERESTART; 1762 } 1763 break; 1764 } 1765 1766 if ((sense_flags & SF_PRINT_ALWAYS) || 1767 CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO)) 1768 action |= SSQ_PRINT_SENSE; 1769 else if (sense_flags & SF_NO_PRINT) 1770 action &= ~SSQ_PRINT_SENSE; 1771 if ((action & SSQ_PRINT_SENSE) != 0) 1772 cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL); 1773 if (error != 0 && (action & SSQ_PRINT_SENSE) != 0) { 1774 if (error != ERESTART) { 1775 if (action_string == NULL) 1776 action_string = "Unretryable error"; 1777 xpt_print(ccb->ccb_h.path, "Error %d, %s\n", 1778 error, action_string); 1779 } else if (action_string != NULL) 1780 xpt_print(ccb->ccb_h.path, "%s\n", action_string); 1781 else 1782 xpt_print(ccb->ccb_h.path, "Retrying command\n"); 1783 } 1784 1785 if (devctl_err && (error != 0 || (action & SSQ_PRINT_SENSE) != 0)) 1786 cam_periph_devctl_notify(orig_ccb); 1787 1788 if ((action & SSQ_LOST) != 0) { 1789 lun_id_t lun_id; 1790 1791 /* 1792 * For a selection timeout, we consider all of the LUNs on 1793 * the target to be gone. If the status is CAM_DEV_NOT_THERE, 1794 * then we only get rid of the device(s) specified by the 1795 * path in the original CCB. 1796 */ 1797 if (status == CAM_SEL_TIMEOUT) 1798 lun_id = CAM_LUN_WILDCARD; 1799 else 1800 lun_id = xpt_path_lun_id(ccb->ccb_h.path); 1801 1802 /* Should we do more if we can't create the path?? */ 1803 if (xpt_create_path(&newpath, periph, 1804 xpt_path_path_id(ccb->ccb_h.path), 1805 xpt_path_target_id(ccb->ccb_h.path), 1806 lun_id) == CAM_REQ_CMP) { 1807 1808 /* 1809 * Let peripheral drivers know that this 1810 * device has gone away. 1811 */ 1812 xpt_async(AC_LOST_DEVICE, newpath, NULL); 1813 xpt_free_path(newpath); 1814 } 1815 } 1816 1817 /* Broadcast UNIT ATTENTIONs to all periphs. */ 1818 if ((action & SSQ_UA) != 0) 1819 xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb); 1820 1821 /* Rescan target on "Reported LUNs data has changed" */ 1822 if ((action & SSQ_RESCAN) != 0) { 1823 if (xpt_create_path(&newpath, NULL, 1824 xpt_path_path_id(ccb->ccb_h.path), 1825 xpt_path_target_id(ccb->ccb_h.path), 1826 CAM_LUN_WILDCARD) == CAM_REQ_CMP) { 1827 1828 scan_ccb = xpt_alloc_ccb_nowait(); 1829 if (scan_ccb != NULL) { 1830 scan_ccb->ccb_h.path = newpath; 1831 scan_ccb->ccb_h.func_code = XPT_SCAN_TGT; 1832 scan_ccb->crcn.flags = 0; 1833 xpt_rescan(scan_ccb); 1834 } else { 1835 xpt_print(newpath, 1836 "Can't allocate CCB to rescan target\n"); 1837 xpt_free_path(newpath); 1838 } 1839 } 1840 } 1841 1842 /* Attempt a retry */ 1843 if (error == ERESTART || error == 0) { 1844 if (frozen != 0) 1845 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1846 if (error == ERESTART) 1847 xpt_action(ccb); 1848 if (frozen != 0) 1849 cam_release_devq(ccb->ccb_h.path, 1850 relsim_flags, 1851 openings, 1852 timeout, 1853 /*getcount_only*/0); 1854 } 1855 1856 return (error); 1857 } 1858 1859 #define CAM_PERIPH_DEVD_MSG_SIZE 256 1860 1861 static void 1862 cam_periph_devctl_notify(union ccb *ccb) 1863 { 1864 struct cam_periph *periph; 1865 struct ccb_getdev *cgd; 1866 struct sbuf sb; 1867 int serr, sk, asc, ascq; 1868 char *sbmsg, *type; 1869 1870 sbmsg = malloc(CAM_PERIPH_DEVD_MSG_SIZE, M_CAMPERIPH, M_NOWAIT); 1871 if (sbmsg == NULL) 1872 return; 1873 1874 sbuf_new(&sb, sbmsg, CAM_PERIPH_DEVD_MSG_SIZE, SBUF_FIXEDLEN); 1875 1876 periph = xpt_path_periph(ccb->ccb_h.path); 1877 sbuf_printf(&sb, "device=%s%d ", periph->periph_name, 1878 periph->unit_number); 1879 1880 sbuf_printf(&sb, "serial=\""); 1881 if ((cgd = (struct ccb_getdev *)xpt_alloc_ccb_nowait()) != NULL) { 1882 xpt_setup_ccb(&cgd->ccb_h, ccb->ccb_h.path, 1883 CAM_PRIORITY_NORMAL); 1884 cgd->ccb_h.func_code = XPT_GDEV_TYPE; 1885 xpt_action((union ccb *)cgd); 1886 1887 if (cgd->ccb_h.status == CAM_REQ_CMP) 1888 sbuf_bcat(&sb, cgd->serial_num, cgd->serial_num_len); 1889 xpt_free_ccb((union ccb *)cgd); 1890 } 1891 sbuf_printf(&sb, "\" "); 1892 sbuf_printf(&sb, "cam_status=\"0x%x\" ", ccb->ccb_h.status); 1893 1894 switch (ccb->ccb_h.status & CAM_STATUS_MASK) { 1895 case CAM_CMD_TIMEOUT: 1896 sbuf_printf(&sb, "timeout=%d ", ccb->ccb_h.timeout); 1897 type = "timeout"; 1898 break; 1899 case CAM_SCSI_STATUS_ERROR: 1900 sbuf_printf(&sb, "scsi_status=%d ", ccb->csio.scsi_status); 1901 if (scsi_extract_sense_ccb(ccb, &serr, &sk, &asc, &ascq)) 1902 sbuf_printf(&sb, "scsi_sense=\"%02x %02x %02x %02x\" ", 1903 serr, sk, asc, ascq); 1904 type = "error"; 1905 break; 1906 case CAM_ATA_STATUS_ERROR: 1907 { 1908 char res_str[(11 * 3) + 1]; 1909 1910 sbuf_printf(&sb, "RES=\"%s\" ", ata_res_string(&ccb->ataio.res, 1911 res_str, sizeof(res_str))); 1912 type = "error"; 1913 break; 1914 } 1915 default: 1916 type = "error"; 1917 break; 1918 } 1919 1920 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1921 sbuf_printf(&sb, "CDB=\""); 1922 scsi_cdb_sbuf(scsiio_cdb_ptr(&ccb->csio), &sb); 1923 sbuf_printf(&sb, "\" "); 1924 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1925 sbuf_printf(&sb, "ACB=\""); 1926 ata_cmd_sbuf(&ccb->ataio.cmd, &sb); 1927 sbuf_printf(&sb, "\" "); 1928 } 1929 1930 if (sbuf_finish(&sb) == 0) 1931 devctl_notify("CAM", "periph", type, sbuf_data(&sb)); 1932 sbuf_delete(&sb); 1933 free(sbmsg, M_CAMPERIPH); 1934 } 1935
Cache object: 6ac2f86461d100d2d28ddf4ea366e225
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]