1 /*-
2 * Copyright 2009 Scott Long
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. The name of the author may not be used to endorse or promote products
12 * derived from this software without specific prior written permission.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
18 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD$
27 */
28
29 #ifndef _CAM_CAM_XPT_INTERNAL_H
30 #define _CAM_CAM_XPT_INTERNAL_H 1
31
32 /* Forward Declarations */
33 struct cam_eb;
34 struct cam_et;
35 struct cam_ed;
36
37 typedef struct cam_ed * (*xpt_alloc_device_func)(struct cam_eb *bus,
38 struct cam_et *target,
39 lun_id_t lun_id);
40 typedef void (*xpt_release_device_func)(struct cam_ed *device);
41 typedef void (*xpt_action_func)(union ccb *start_ccb);
42 typedef void (*xpt_dev_async_func)(u_int32_t async_code,
43 struct cam_eb *bus,
44 struct cam_et *target,
45 struct cam_ed *device,
46 void *async_arg);
47 typedef void (*xpt_announce_periph_func)(struct cam_periph *periph);
48
49 struct xpt_xport {
50 xpt_alloc_device_func alloc_device;
51 xpt_release_device_func reldev;
52 xpt_action_func action;
53 xpt_dev_async_func async;
54 xpt_announce_periph_func announce;
55 };
56
57 /*
58 * Structure for queueing a device in a run queue.
59 * There is one run queue for allocating new ccbs,
60 * and another for sending ccbs to the controller.
61 */
62 struct cam_ed_qinfo {
63 cam_pinfo pinfo;
64 struct cam_ed *device;
65 };
66
67 /*
68 * The CAM EDT (Existing Device Table) contains the device information for
69 * all devices for all busses in the system. The table contains a
70 * cam_ed structure for each device on the bus.
71 */
72 struct cam_ed {
73 TAILQ_ENTRY(cam_ed) links;
74 struct cam_ed_qinfo alloc_ccb_entry;
75 struct cam_ed_qinfo send_ccb_entry;
76 struct cam_et *target;
77 struct cam_sim *sim;
78 lun_id_t lun_id;
79 struct camq drvq; /*
80 * Queue of type drivers wanting to do
81 * work on this device.
82 */
83 struct cam_ccbq ccbq; /* Queue of pending ccbs */
84 struct async_list asyncs; /* Async callback info for this B/T/L */
85 struct periph_list periphs; /* All attached devices */
86 u_int generation; /* Generation number */
87 struct cam_periph *owner; /* Peripheral driver's ownership tag */
88 void *quirk; /* Oddities about this device */
89 u_int maxtags;
90 u_int mintags;
91 cam_proto protocol;
92 u_int protocol_version;
93 cam_xport transport;
94 u_int transport_version;
95 struct scsi_inquiry_data inq_data;
96 uint8_t *supported_vpds;
97 uint8_t supported_vpds_len;
98 struct ata_params ident_data;
99 u_int8_t inq_flags; /*
100 * Current settings for inquiry flags.
101 * This allows us to override settings
102 * like disconnection and tagged
103 * queuing for a device.
104 */
105 u_int8_t queue_flags; /* Queue flags from the control page */
106 u_int8_t serial_num_len;
107 u_int8_t *serial_num;
108 u_int32_t flags;
109 #define CAM_DEV_UNCONFIGURED 0x01
110 #define CAM_DEV_REL_TIMEOUT_PENDING 0x02
111 #define CAM_DEV_REL_ON_COMPLETE 0x04
112 #define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08
113 #define CAM_DEV_RESIZE_QUEUE_NEEDED 0x10
114 #define CAM_DEV_TAG_AFTER_COUNT 0x20
115 #define CAM_DEV_INQUIRY_DATA_VALID 0x40
116 #define CAM_DEV_IN_DV 0x80
117 #define CAM_DEV_DV_HIT_BOTTOM 0x100
118 #define CAM_DEV_IDENTIFY_DATA_VALID 0x200
119 u_int32_t tag_delay_count;
120 #define CAM_TAG_DELAY_COUNT 5
121 u_int32_t tag_saved_openings;
122 u_int32_t refcount;
123 struct callout callout;
124 };
125
126 /*
127 * Each target is represented by an ET (Existing Target). These
128 * entries are created when a target is successfully probed with an
129 * identify, and removed when a device fails to respond after a number
130 * of retries, or a bus rescan finds the device missing.
131 */
132 struct cam_et {
133 TAILQ_HEAD(, cam_ed) ed_entries;
134 TAILQ_ENTRY(cam_et) links;
135 struct cam_eb *bus;
136 target_id_t target_id;
137 u_int32_t refcount;
138 u_int generation;
139 struct timeval last_reset;
140 u_int rpl_size;
141 struct scsi_report_luns_data *luns;
142 };
143
144 /*
145 * Each bus is represented by an EB (Existing Bus). These entries
146 * are created by calls to xpt_bus_register and deleted by calls to
147 * xpt_bus_deregister.
148 */
149 struct cam_eb {
150 TAILQ_HEAD(, cam_et) et_entries;
151 TAILQ_ENTRY(cam_eb) links;
152 path_id_t path_id;
153 struct cam_sim *sim;
154 struct timeval last_reset;
155 u_int32_t flags;
156 #define CAM_EB_RUNQ_SCHEDULED 0x01
157 u_int32_t refcount;
158 u_int generation;
159 device_t parent_dev;
160 struct xpt_xport *xport;
161 };
162
163 struct cam_path {
164 struct cam_periph *periph;
165 struct cam_eb *bus;
166 struct cam_et *target;
167 struct cam_ed *device;
168 };
169
170 struct xpt_xport * scsi_get_xport(void);
171 struct xpt_xport * ata_get_xport(void);
172
173 struct cam_ed * xpt_alloc_device(struct cam_eb *bus,
174 struct cam_et *target,
175 lun_id_t lun_id);
176 void xpt_acquire_device(struct cam_ed *device);
177 void xpt_release_device(struct cam_ed *device);
178 int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
179 u_int32_t new_priority);
180 u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings);
181 void xpt_start_tags(struct cam_path *path);
182 void xpt_stop_tags(struct cam_path *path);
183
184 MALLOC_DECLARE(M_CAMXPT);
185
186 #endif
Cache object: 06df0a5660aeaee669b72be69891003d
|