Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/cam/mmc/mmc_xpt.c
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2013,2014 Ilya Bakulin <ilya@bakulin.de> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/bus.h> 34 #include <sys/endian.h> 35 #include <sys/systm.h> 36 #include <sys/types.h> 37 #include <sys/malloc.h> 38 #include <sys/kernel.h> 39 #include <sys/time.h> 40 #include <sys/conf.h> 41 #include <sys/fcntl.h> 42 #include <sys/interrupt.h> 43 #include <sys/sbuf.h> 44 45 #include <sys/lock.h> 46 #include <sys/mutex.h> 47 #include <sys/sysctl.h> 48 #include <sys/condvar.h> 49 50 #include <cam/cam.h> 51 #include <cam/cam_ccb.h> 52 #include <cam/cam_queue.h> 53 #include <cam/cam_periph.h> 54 #include <cam/cam_sim.h> 55 #include <cam/cam_xpt.h> 56 #include <cam/cam_xpt_sim.h> 57 #include <cam/cam_xpt_periph.h> 58 #include <cam/cam_xpt_internal.h> 59 #include <cam/cam_debug.h> 60 61 #include <cam/mmc/mmc.h> 62 #include <cam/mmc/mmc_bus.h> 63 64 #include <machine/stdarg.h> /* for xpt_print below */ 65 #include <machine/_inttypes.h> /* for PRIu64 */ 66 #include "opt_cam.h" 67 68 FEATURE(mmccam, "CAM-based MMC/SD/SDIO stack"); 69 70 static struct cam_ed * mmc_alloc_device(struct cam_eb *bus, 71 struct cam_et *target, lun_id_t lun_id); 72 static void mmc_dev_async(u_int32_t async_code, struct cam_eb *bus, 73 struct cam_et *target, struct cam_ed *device, void *async_arg); 74 static void mmc_action(union ccb *start_ccb); 75 static void mmc_dev_advinfo(union ccb *start_ccb); 76 static void mmc_announce_periph(struct cam_periph *periph); 77 static void mmc_scan_lun(struct cam_periph *periph, 78 struct cam_path *path, cam_flags flags, union ccb *ccb); 79 80 /* mmcprobe methods */ 81 static cam_status mmcprobe_register(struct cam_periph *periph, void *arg); 82 static void mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb); 83 static void mmcprobe_cleanup(struct cam_periph *periph); 84 static void mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb); 85 86 static void mmc_proto_announce(struct cam_ed *device); 87 static void mmc_proto_denounce(struct cam_ed *device); 88 static void mmc_proto_debug_out(union ccb *ccb); 89 90 typedef enum { 91 PROBE_RESET, 92 PROBE_IDENTIFY, 93 PROBE_POWER_OFF, 94 PROBE_GET_HOST_OCR, 95 PROBE_RESET_BUS, 96 PROBE_SET_ID_FREQ, 97 PROBE_SET_CS, 98 PROBE_GO_IDLE_STATE, 99 PROBE_SDIO_RESET, 100 PROBE_SEND_IF_COND, 101 PROBE_SDIO_INIT, 102 PROBE_MMC_INIT, 103 PROBE_SEND_APP_OP_COND, 104 PROBE_GET_CID, 105 PROBE_GET_CSD, 106 PROBE_SEND_RELATIVE_ADDR, 107 PROBE_MMC_SET_RELATIVE_ADDR, 108 PROBE_SELECT_CARD, 109 PROBE_DONE, 110 PROBE_INVALID 111 } probe_action; 112 113 static char *probe_action_text[] = { 114 "PROBE_RESET", 115 "PROBE_IDENTIFY", 116 "PROBE_POWER_OFF", 117 "PROBE_GET_HOST_OCR", 118 "PROBE_RESET_BUS", 119 "PROBE_SET_ID_FREQ", 120 "PROBE_SET_CS", 121 "PROBE_GO_IDLE_STATE", 122 "PROBE_SDIO_RESET", 123 "PROBE_SEND_IF_COND", 124 "PROBE_SDIO_INIT", 125 "PROBE_MMC_INIT", 126 "PROBE_SEND_APP_OP_COND", 127 "PROBE_GET_CID", 128 "PROBE_GET_CSD", 129 "PROBE_SEND_RELATIVE_ADDR", 130 "PROBE_MMC_SET_RELATIVE_ADDR", 131 "PROBE_SELECT_CARD", 132 "PROBE_DONE", 133 "PROBE_INVALID" 134 }; 135 136 #define PROBE_SET_ACTION(softc, newaction) \ 137 do { \ 138 char **text; \ 139 text = probe_action_text; \ 140 CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ 141 ("Probe %s to %s\n", text[(softc)->action], \ 142 text[(newaction)])); \ 143 (softc)->action = (newaction); \ 144 } while(0) 145 146 static struct xpt_xport_ops mmc_xport_ops = { 147 .alloc_device = mmc_alloc_device, 148 .action = mmc_action, 149 .async = mmc_dev_async, 150 .announce = mmc_announce_periph, 151 }; 152 153 #define MMC_XPT_XPORT(x, X) \ 154 static struct xpt_xport mmc_xport_ ## x = { \ 155 .xport = XPORT_ ## X, \ 156 .name = #x, \ 157 .ops = &mmc_xport_ops, \ 158 }; \ 159 CAM_XPT_XPORT(mmc_xport_ ## x); 160 161 MMC_XPT_XPORT(mmc, MMCSD); 162 163 static struct xpt_proto_ops mmc_proto_ops = { 164 .announce = mmc_proto_announce, 165 .denounce = mmc_proto_denounce, 166 .debug_out = mmc_proto_debug_out, 167 }; 168 169 static struct xpt_proto mmc_proto = { 170 .proto = PROTO_MMCSD, 171 .name = "mmcsd", 172 .ops = &mmc_proto_ops, 173 }; 174 CAM_XPT_PROTO(mmc_proto); 175 176 typedef struct { 177 probe_action action; 178 int restart; 179 uint32_t host_ocr; 180 uint32_t flags; 181 #define PROBE_FLAG_ACMD_SENT 0x1 /* CMD55 is sent, card expects ACMD */ 182 #define PROBE_FLAG_HOST_CAN_DO_18V 0x2 /* Host can do 1.8V signaling */ 183 uint8_t acmd41_count; /* how many times ACMD41 has been issued */ 184 struct cam_periph *periph; 185 } mmcprobe_softc; 186 187 /* XPort functions -- an interface to CAM at periph side */ 188 189 static struct cam_ed * 190 mmc_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) 191 { 192 struct cam_ed *device; 193 194 device = xpt_alloc_device(bus, target, lun_id); 195 if (device == NULL) 196 return (NULL); 197 198 device->quirk = NULL; 199 device->mintags = 0; 200 device->maxtags = 0; 201 bzero(&device->inq_data, sizeof(device->inq_data)); 202 device->inq_flags = 0; 203 device->queue_flags = 0; 204 device->serial_num = NULL; 205 device->serial_num_len = 0; 206 return (device); 207 } 208 209 static void 210 mmc_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, 211 struct cam_ed *device, void *async_arg) 212 { 213 214 /* 215 * We only need to handle events for real devices. 216 */ 217 if (target->target_id == CAM_TARGET_WILDCARD 218 || device->lun_id == CAM_LUN_WILDCARD) 219 return; 220 221 if (async_code == AC_LOST_DEVICE && 222 (device->flags & CAM_DEV_UNCONFIGURED) == 0) { 223 device->flags |= CAM_DEV_UNCONFIGURED; 224 xpt_release_device(device); 225 } 226 } 227 228 /* Taken from nvme_scan_lun, thanks to bsdimp@ */ 229 static void 230 mmc_scan_lun(struct cam_periph *periph, struct cam_path *path, 231 cam_flags flags, union ccb *request_ccb) 232 { 233 struct ccb_pathinq cpi; 234 cam_status status; 235 struct cam_periph *old_periph; 236 int lock; 237 238 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmc_scan_lun\n")); 239 240 xpt_path_inq(&cpi, path); 241 242 if (cpi.ccb_h.status != CAM_REQ_CMP) { 243 if (request_ccb != NULL) { 244 request_ccb->ccb_h.status = cpi.ccb_h.status; 245 xpt_done(request_ccb); 246 } 247 return; 248 } 249 250 if (xpt_path_lun_id(path) == CAM_LUN_WILDCARD) { 251 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmd_scan_lun ignoring bus\n")); 252 request_ccb->ccb_h.status = CAM_REQ_CMP; /* XXX signal error ? */ 253 xpt_done(request_ccb); 254 return; 255 } 256 257 lock = (xpt_path_owned(path) == 0); 258 if (lock) 259 xpt_path_lock(path); 260 261 if ((old_periph = cam_periph_find(path, "mmcprobe")) != NULL) { 262 if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { 263 // mmcprobe_softc *softc; 264 // softc = (mmcprobe_softc *)old_periph->softc; 265 // Not sure if we need request ccb queue for mmc 266 // TAILQ_INSERT_TAIL(&softc->request_ccbs, 267 // &request_ccb->ccb_h, periph_links.tqe); 268 // softc->restart = 1; 269 CAM_DEBUG(path, CAM_DEBUG_INFO, 270 ("Got scan request, but mmcprobe already exists\n")); 271 request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; 272 xpt_done(request_ccb); 273 } else { 274 request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; 275 xpt_done(request_ccb); 276 } 277 } else { 278 CAM_DEBUG(path, CAM_DEBUG_INFO, 279 (" Set up the mmcprobe device...\n")); 280 281 status = cam_periph_alloc(mmcprobe_register, NULL, 282 mmcprobe_cleanup, 283 mmcprobe_start, 284 "mmcprobe", 285 CAM_PERIPH_BIO, 286 path, NULL, 0, 287 request_ccb); 288 if (status != CAM_REQ_CMP) { 289 xpt_print(path, "xpt_scan_lun: cam_alloc_periph " 290 "returned an error, can't continue probe\n"); 291 } 292 request_ccb->ccb_h.status = status; 293 xpt_done(request_ccb); 294 } 295 296 if (lock) 297 xpt_path_unlock(path); 298 } 299 300 static void 301 mmc_action(union ccb *start_ccb) 302 { 303 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, 304 ("mmc_action! func_code=%x, action %s\n", start_ccb->ccb_h.func_code, 305 xpt_action_name(start_ccb->ccb_h.func_code))); 306 switch (start_ccb->ccb_h.func_code) { 307 case XPT_SCAN_BUS: 308 /* FALLTHROUGH */ 309 case XPT_SCAN_TGT: 310 /* FALLTHROUGH */ 311 case XPT_SCAN_LUN: 312 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO, 313 ("XPT_SCAN_{BUS,TGT,LUN}\n")); 314 mmc_scan_lun(start_ccb->ccb_h.path->periph, 315 start_ccb->ccb_h.path, start_ccb->crcn.flags, 316 start_ccb); 317 break; 318 319 case XPT_DEV_ADVINFO: 320 { 321 mmc_dev_advinfo(start_ccb); 322 break; 323 } 324 325 default: 326 xpt_action_default(start_ccb); 327 break; 328 } 329 } 330 331 static void 332 mmc_dev_advinfo(union ccb *start_ccb) 333 { 334 struct cam_ed *device; 335 struct ccb_dev_advinfo *cdai; 336 off_t amt; 337 338 xpt_path_assert(start_ccb->ccb_h.path, MA_OWNED); 339 start_ccb->ccb_h.status = CAM_REQ_INVALID; 340 device = start_ccb->ccb_h.path->device; 341 cdai = &start_ccb->cdai; 342 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, 343 ("%s: request %x\n", __func__, cdai->buftype)); 344 345 /* We don't support writing any data */ 346 if (cdai->flags & CDAI_FLAG_STORE) 347 panic("Attempt to store data?!"); 348 349 switch(cdai->buftype) { 350 case CDAI_TYPE_SCSI_DEVID: 351 cdai->provsiz = device->device_id_len; 352 if (device->device_id_len == 0) 353 break; 354 amt = MIN(cdai->provsiz, cdai->bufsiz); 355 memcpy(cdai->buf, device->device_id, amt); 356 break; 357 case CDAI_TYPE_SERIAL_NUM: 358 cdai->provsiz = device->serial_num_len; 359 if (device->serial_num_len == 0) 360 break; 361 amt = MIN(cdai->provsiz, cdai->bufsiz); 362 memcpy(cdai->buf, device->serial_num, amt); 363 break; 364 case CDAI_TYPE_PHYS_PATH: /* pass(4) wants this */ 365 cdai->provsiz = 0; 366 break; 367 case CDAI_TYPE_MMC_PARAMS: 368 cdai->provsiz = sizeof(struct mmc_params); 369 amt = MIN(cdai->provsiz, cdai->bufsiz); 370 memcpy(cdai->buf, &device->mmc_ident_data, amt); 371 break; 372 default: 373 panic("Unknown buftype"); 374 return; 375 } 376 start_ccb->ccb_h.status = CAM_REQ_CMP; 377 } 378 379 static void 380 mmc_announce_periph(struct cam_periph *periph) 381 { 382 struct ccb_pathinq cpi; 383 struct ccb_trans_settings cts; 384 struct cam_path *path = periph->path; 385 386 cam_periph_assert(periph, MA_OWNED); 387 388 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmc_announce_periph")); 389 390 memset(&cts, 0, sizeof(cts)); 391 xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NORMAL); 392 cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; 393 cts.type = CTS_TYPE_CURRENT_SETTINGS; 394 xpt_action((union ccb*)&cts); 395 if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 396 return; 397 xpt_path_inq(&cpi, periph->path); 398 CAM_DEBUG(path, CAM_DEBUG_INFO, 399 ("XPT info: CLK %04d, ...\n", cts.proto_specific.mmc.ios.clock)); 400 } 401 402 void 403 mmccam_start_discovery(struct cam_sim *sim) 404 { 405 union ccb *ccb; 406 uint32_t pathid; 407 408 pathid = cam_sim_path(sim); 409 ccb = xpt_alloc_ccb(); 410 411 /* 412 * We create a rescan request for BUS:0:0, since the card 413 * will be at lun 0. 414 */ 415 if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, 416 /* target */ 0, /* lun */ 0) != CAM_REQ_CMP) { 417 xpt_free_ccb(ccb); 418 return; 419 } 420 421 KASSERT(xpt_path_sim_device(ccb->ccb_h.path) != NULL, 422 ("%s(%s): device is not initialized on sim's path", 423 __func__, cam_sim_name(sim))); 424 xpt_rescan(ccb); 425 } 426 427 /* This func is called per attached device :-( */ 428 static void 429 mmc_print_ident(struct mmc_params *ident_data, struct sbuf *sb) 430 { 431 bool space = false; 432 433 sbuf_printf(sb, "Relative addr: %08x\n", ident_data->card_rca); 434 sbuf_printf(sb, "Card features: <"); 435 if (ident_data->card_features & CARD_FEATURE_MMC) { 436 sbuf_printf(sb, "MMC"); 437 space = true; 438 } 439 if (ident_data->card_features & CARD_FEATURE_MEMORY) { 440 sbuf_printf(sb, "%sMemory", space ? " " : ""); 441 space = true; 442 } 443 if (ident_data->card_features & CARD_FEATURE_SDHC) { 444 sbuf_printf(sb, "%sHigh-Capacity", space ? " " : ""); 445 space = true; 446 } 447 if (ident_data->card_features & CARD_FEATURE_SD20) { 448 sbuf_printf(sb, "%sSD2.0-Conditions", space ? " " : ""); 449 space = true; 450 } 451 if (ident_data->card_features & CARD_FEATURE_SDIO) { 452 sbuf_printf(sb, "%sSDIO", space ? " " : ""); 453 space = true; 454 } 455 if (ident_data->card_features & CARD_FEATURE_18V) { 456 sbuf_printf(sb, "%s1.8-Signaling", space ? " " : ""); 457 } 458 sbuf_printf(sb, ">\n"); 459 460 if (ident_data->card_features & CARD_FEATURE_MEMORY) 461 sbuf_printf(sb, "Card memory OCR: %08x\n", 462 ident_data->card_ocr); 463 464 if (ident_data->card_features & CARD_FEATURE_SDIO) { 465 sbuf_printf(sb, "Card IO OCR: %08x\n", ident_data->io_ocr); 466 sbuf_printf(sb, "Number of functions: %u\n", 467 ident_data->sdio_func_count); 468 } 469 470 sbuf_finish(sb); 471 printf("%s", sbuf_data(sb)); 472 sbuf_clear(sb); 473 } 474 475 static void 476 mmc_proto_announce(struct cam_ed *device) 477 { 478 struct sbuf sb; 479 char buffer[256]; 480 481 sbuf_new(&sb, buffer, sizeof(buffer), SBUF_FIXEDLEN); 482 mmc_print_ident(&device->mmc_ident_data, &sb); 483 sbuf_finish(&sb); 484 sbuf_putbuf(&sb); 485 } 486 487 static void 488 mmc_proto_denounce(struct cam_ed *device) 489 { 490 491 mmc_proto_announce(device); 492 } 493 494 static void 495 mmc_proto_debug_out(union ccb *ccb) 496 { 497 if (ccb->ccb_h.func_code != XPT_MMC_IO) 498 return; 499 500 CAM_DEBUG(ccb->ccb_h.path, 501 CAM_DEBUG_CDB,("mmc_proto_debug_out\n")); 502 } 503 504 static periph_init_t probe_periph_init; 505 506 static struct periph_driver probe_driver = 507 { 508 probe_periph_init, "mmcprobe", 509 TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0, 510 CAM_PERIPH_DRV_EARLY 511 }; 512 513 PERIPHDRIVER_DECLARE(mmcprobe, probe_driver); 514 515 #define CARD_ID_FREQUENCY 400000 /* Spec requires 400kHz max during ID phase. */ 516 517 static void 518 probe_periph_init(void) 519 { 520 } 521 522 static cam_status 523 mmcprobe_register(struct cam_periph *periph, void *arg) 524 { 525 mmcprobe_softc *softc; 526 union ccb *request_ccb; /* CCB representing the probe request */ 527 int status; 528 529 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmcprobe_register\n")); 530 531 request_ccb = (union ccb *)arg; 532 if (request_ccb == NULL) { 533 printf("mmcprobe_register: no probe CCB, " 534 "can't register device\n"); 535 return(CAM_REQ_CMP_ERR); 536 } 537 538 softc = (mmcprobe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT); 539 540 if (softc == NULL) { 541 printf("proberegister: Unable to probe new device. " 542 "Unable to allocate softc\n"); 543 return(CAM_REQ_CMP_ERR); 544 } 545 546 softc->flags = 0; 547 softc->acmd41_count = 0; 548 periph->softc = softc; 549 softc->periph = periph; 550 softc->action = PROBE_INVALID; 551 softc->restart = 0; 552 status = cam_periph_acquire(periph); 553 554 memset(&periph->path->device->mmc_ident_data, 0, sizeof(struct mmc_params)); 555 if (status != 0) { 556 printf("proberegister: cam_periph_acquire failed (status=%d)\n", 557 status); 558 return (CAM_REQ_CMP_ERR); 559 } 560 CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); 561 562 if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) 563 PROBE_SET_ACTION(softc, PROBE_RESET); 564 else 565 PROBE_SET_ACTION(softc, PROBE_IDENTIFY); 566 567 /* This will kick the ball */ 568 xpt_schedule(periph, CAM_PRIORITY_XPT); 569 570 return(CAM_REQ_CMP); 571 } 572 573 static int 574 mmc_highest_voltage(uint32_t ocr) 575 { 576 int i; 577 578 for (i = MMC_OCR_MAX_VOLTAGE_SHIFT; 579 i >= MMC_OCR_MIN_VOLTAGE_SHIFT; i--) 580 if (ocr & (1 << i)) 581 return (i); 582 return (-1); 583 } 584 585 static inline void 586 init_standard_ccb(union ccb *ccb, uint32_t cmd) 587 { 588 ccb->ccb_h.func_code = cmd; 589 ccb->ccb_h.flags = CAM_DIR_OUT; 590 ccb->ccb_h.retry_count = 0; 591 ccb->ccb_h.timeout = 15 * 1000; 592 ccb->ccb_h.cbfcnp = mmcprobe_done; 593 } 594 595 static void 596 mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb) 597 { 598 mmcprobe_softc *softc; 599 struct cam_path *path; 600 struct ccb_mmcio *mmcio; 601 struct ccb_trans_settings_mmc *cts; 602 603 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_start\n")); 604 softc = (mmcprobe_softc *)periph->softc; 605 path = start_ccb->ccb_h.path; 606 mmcio = &start_ccb->mmcio; 607 cts = &start_ccb->cts.proto_specific.mmc; 608 struct mmc_params *mmcp = &path->device->mmc_ident_data; 609 610 memset(&mmcio->cmd, 0, sizeof(struct mmc_command)); 611 612 if (softc->restart) { 613 softc->restart = 0; 614 if (path->device->flags & CAM_DEV_UNCONFIGURED) 615 softc->action = PROBE_RESET; 616 else 617 softc->action = PROBE_IDENTIFY; 618 } 619 620 /* Here is the place where the identify fun begins */ 621 switch (softc->action) { 622 case PROBE_RESET: 623 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_RESET\n")); 624 /* FALLTHROUGH */ 625 case PROBE_IDENTIFY: 626 xpt_path_inq(&start_ccb->cpi, periph->path); 627 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_IDENTIFY\n")); 628 init_standard_ccb(start_ccb, XPT_MMC_GET_TRAN_SETTINGS); 629 break; 630 631 case PROBE_POWER_OFF: 632 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("power off the card\n")); 633 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 634 cts->ios.power_mode = power_off; 635 cts->ios_valid = MMC_PM; 636 break; 637 638 case PROBE_GET_HOST_OCR: 639 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("get the host ocr\n")); 640 init_standard_ccb(start_ccb, XPT_MMC_GET_TRAN_SETTINGS); 641 break; 642 643 case PROBE_RESET_BUS: 644 { 645 uint32_t host_caps = cts->host_caps; 646 if (host_caps & MMC_CAP_SIGNALING_180) 647 softc->flags |= PROBE_FLAG_HOST_CAN_DO_18V; 648 uint32_t hv = mmc_highest_voltage(softc->host_ocr); 649 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("reseting the bus\n")); 650 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 651 cts->ios.vdd = hv; 652 cts->ios.bus_mode = opendrain; 653 cts->ios.chip_select = cs_dontcare; 654 cts->ios.power_mode = power_up; 655 cts->ios.bus_width = bus_width_1; 656 cts->ios.clock = 0; 657 cts->ios_valid = MMC_VDD | MMC_PM | MMC_BM | 658 MMC_CS | MMC_BW | MMC_CLK; 659 break; 660 } 661 662 case PROBE_SET_ID_FREQ: 663 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("setting the ID freq\n")); 664 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 665 cts->ios.power_mode = power_on; 666 cts->ios.clock = CARD_ID_FREQUENCY; 667 cts->ios.timing = bus_timing_normal; 668 cts->ios_valid = MMC_PM | MMC_CLK | MMC_BT; 669 break; 670 671 case PROBE_SET_CS: 672 /* Begin mmc_idle_cards() */ 673 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 674 cts->ios.chip_select = cs_high; 675 cts->ios_valid = MMC_CS; 676 break; 677 678 case PROBE_GO_IDLE_STATE: 679 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Send first XPT_MMC_IO\n")); 680 init_standard_ccb(start_ccb, XPT_MMC_IO); 681 mmcio->cmd.opcode = MMC_GO_IDLE_STATE; /* CMD 0 */ 682 mmcio->cmd.arg = 0; 683 mmcio->cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; 684 mmcio->cmd.data = NULL; 685 mmcio->stop.opcode = 0; 686 687 /* XXX Reset I/O portion as well */ 688 break; 689 690 case PROBE_SDIO_RESET: 691 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 692 ("Start with PROBE_SDIO_RESET\n")); 693 uint32_t mmc_arg = SD_IO_RW_ADR(SD_IO_CCCR_CTL) 694 | SD_IO_RW_DAT(CCCR_CTL_RES) | SD_IO_RW_WR | SD_IO_RW_RAW; 695 cam_fill_mmcio(&start_ccb->mmcio, 696 /*retries*/ 0, 697 /*cbfcnp*/ mmcprobe_done, 698 /*flags*/ CAM_DIR_NONE, 699 /*mmc_opcode*/ SD_IO_RW_DIRECT, 700 /*mmc_arg*/ mmc_arg, 701 /*mmc_flags*/ MMC_RSP_R5 | MMC_CMD_AC, 702 /*mmc_data*/ NULL, 703 /*timeout*/ 1000); 704 break; 705 case PROBE_SEND_IF_COND: 706 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 707 ("Start with PROBE_SEND_IF_COND\n")); 708 init_standard_ccb(start_ccb, XPT_MMC_IO); 709 mmcio->cmd.opcode = SD_SEND_IF_COND; /* CMD 8 */ 710 mmcio->cmd.arg = (1 << 8) + 0xAA; 711 mmcio->cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR; 712 mmcio->stop.opcode = 0; 713 break; 714 715 case PROBE_SDIO_INIT: 716 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 717 ("Start with PROBE_SDIO_INIT\n")); 718 init_standard_ccb(start_ccb, XPT_MMC_IO); 719 mmcio->cmd.opcode = IO_SEND_OP_COND; /* CMD 5 */ 720 mmcio->cmd.arg = mmcp->io_ocr; 721 mmcio->cmd.flags = MMC_RSP_R4; 722 mmcio->stop.opcode = 0; 723 break; 724 725 case PROBE_MMC_INIT: 726 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 727 ("Start with PROBE_MMC_INIT\n")); 728 init_standard_ccb(start_ccb, XPT_MMC_IO); 729 mmcio->cmd.opcode = MMC_SEND_OP_COND; /* CMD 1 */ 730 mmcio->cmd.arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */; 731 mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; 732 mmcio->stop.opcode = 0; 733 break; 734 735 case PROBE_SEND_APP_OP_COND: 736 init_standard_ccb(start_ccb, XPT_MMC_IO); 737 if (softc->flags & PROBE_FLAG_ACMD_SENT) { 738 mmcio->cmd.opcode = ACMD_SD_SEND_OP_COND; /* CMD 41 */ 739 /* 740 * We set CCS bit because we do support SDHC cards. 741 * XXX: Don't set CCS if no response to CMD8. 742 */ 743 uint32_t cmd_arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */ 744 if (softc->acmd41_count < 10 && mmcp->card_ocr != 0 ) 745 cmd_arg |= MMC_OCR_S18R; 746 mmcio->cmd.arg = cmd_arg; 747 mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; 748 softc->acmd41_count++; 749 } else { 750 mmcio->cmd.opcode = MMC_APP_CMD; /* CMD 55 */ 751 mmcio->cmd.arg = 0; /* rca << 16 */ 752 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; 753 } 754 mmcio->stop.opcode = 0; 755 break; 756 757 case PROBE_GET_CID: /* XXX move to mmc_da */ 758 init_standard_ccb(start_ccb, XPT_MMC_IO); 759 mmcio->cmd.opcode = MMC_ALL_SEND_CID; 760 mmcio->cmd.arg = 0; 761 mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; 762 mmcio->stop.opcode = 0; 763 break; 764 case PROBE_SEND_RELATIVE_ADDR: 765 init_standard_ccb(start_ccb, XPT_MMC_IO); 766 mmcio->cmd.opcode = SD_SEND_RELATIVE_ADDR; 767 mmcio->cmd.arg = 0; 768 mmcio->cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; 769 mmcio->stop.opcode = 0; 770 break; 771 case PROBE_MMC_SET_RELATIVE_ADDR: 772 init_standard_ccb(start_ccb, XPT_MMC_IO); 773 mmcio->cmd.opcode = MMC_SET_RELATIVE_ADDR; 774 mmcio->cmd.arg = MMC_PROPOSED_RCA << 16; 775 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; 776 mmcio->stop.opcode = 0; 777 break; 778 case PROBE_SELECT_CARD: 779 init_standard_ccb(start_ccb, XPT_MMC_IO); 780 mmcio->cmd.opcode = MMC_SELECT_CARD; 781 mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; 782 mmcio->cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; 783 mmcio->stop.opcode = 0; 784 break; 785 case PROBE_GET_CSD: /* XXX move to mmc_da */ 786 init_standard_ccb(start_ccb, XPT_MMC_IO); 787 mmcio->cmd.opcode = MMC_SEND_CSD; 788 mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; 789 mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; 790 mmcio->stop.opcode = 0; 791 break; 792 case PROBE_DONE: 793 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_DONE\n")); 794 init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); 795 cts->ios.bus_mode = pushpull; 796 cts->ios_valid = MMC_BM; 797 xpt_action(start_ccb); 798 return; 799 /* NOTREACHED */ 800 break; 801 case PROBE_INVALID: 802 break; 803 default: 804 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("probestart: invalid action state 0x%x\n", softc->action)); 805 panic("default: case in mmc_probe_start()"); 806 } 807 808 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 809 xpt_action(start_ccb); 810 } 811 812 static void mmcprobe_cleanup(struct cam_periph *periph) 813 { 814 free(periph->softc, M_CAMXPT); 815 } 816 817 static void 818 mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb) 819 { 820 mmcprobe_softc *softc; 821 struct cam_path *path; 822 823 int err; 824 struct ccb_mmcio *mmcio; 825 u_int32_t priority; 826 827 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_done\n")); 828 softc = (mmcprobe_softc *)periph->softc; 829 path = done_ccb->ccb_h.path; 830 priority = done_ccb->ccb_h.pinfo.priority; 831 832 switch (softc->action) { 833 case PROBE_RESET: 834 /* FALLTHROUGH */ 835 case PROBE_IDENTIFY: 836 { 837 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET\n")); 838 PROBE_SET_ACTION(softc, PROBE_POWER_OFF); 839 break; 840 } 841 case PROBE_POWER_OFF: 842 { 843 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_POWER_OFF\n")); 844 PROBE_SET_ACTION(softc, PROBE_GET_HOST_OCR); 845 break; 846 } 847 case PROBE_GET_HOST_OCR: 848 { 849 struct ccb_trans_settings_mmc *cts; 850 cts = &done_ccb->cts.proto_specific.mmc; 851 softc->host_ocr = cts->host_ocr; 852 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_GET_HOST_OCR (Got OCR=%x\n", softc->host_ocr)); 853 PROBE_SET_ACTION(softc, PROBE_RESET_BUS); 854 break; 855 } 856 case PROBE_RESET_BUS: 857 { 858 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET_BUS\n")); 859 PROBE_SET_ACTION(softc, PROBE_SET_ID_FREQ); 860 break; 861 } 862 case PROBE_SET_ID_FREQ: 863 { 864 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_SET_ID_FREQ\n")); 865 PROBE_SET_ACTION(softc, PROBE_SET_CS); 866 break; 867 } 868 case PROBE_SET_CS: 869 { 870 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_SET_CS\n")); 871 PROBE_SET_ACTION(softc, PROBE_GO_IDLE_STATE); 872 break; 873 } 874 case PROBE_GO_IDLE_STATE: 875 { 876 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_GO_IDLE_STATE\n")); 877 mmcio = &done_ccb->mmcio; 878 err = mmcio->cmd.error; 879 880 if (err != MMC_ERR_NONE) { 881 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 882 ("GO_IDLE_STATE failed with error %d\n", 883 err)); 884 885 /* There was a device there, but now it's gone... */ 886 if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { 887 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 888 ("Device lost!\n")); 889 890 xpt_async(AC_LOST_DEVICE, path, NULL); 891 } 892 PROBE_SET_ACTION(softc, PROBE_INVALID); 893 break; 894 } 895 path->device->protocol = PROTO_MMCSD; 896 PROBE_SET_ACTION(softc, PROBE_SEND_IF_COND); 897 break; 898 } 899 case PROBE_SEND_IF_COND: 900 { 901 mmcio = &done_ccb->mmcio; 902 err = mmcio->cmd.error; 903 struct mmc_params *mmcp = &path->device->mmc_ident_data; 904 905 if (err != MMC_ERR_NONE || mmcio->cmd.resp[0] != 0x1AA) { 906 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 907 ("IF_COND: error %d, pattern %08x\n", 908 err, mmcio->cmd.resp[0])); 909 } else { 910 mmcp->card_features |= CARD_FEATURE_SD20; 911 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 912 ("SD 2.0 interface conditions: OK\n")); 913 } 914 PROBE_SET_ACTION(softc, PROBE_SDIO_RESET); 915 break; 916 } 917 case PROBE_SDIO_RESET: 918 { 919 mmcio = &done_ccb->mmcio; 920 err = mmcio->cmd.error; 921 922 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 923 ("SDIO_RESET: error %d, CCCR CTL register: %08x\n", 924 err, mmcio->cmd.resp[0])); 925 PROBE_SET_ACTION(softc, PROBE_SDIO_INIT); 926 break; 927 } 928 case PROBE_SDIO_INIT: 929 { 930 mmcio = &done_ccb->mmcio; 931 err = mmcio->cmd.error; 932 struct mmc_params *mmcp = &path->device->mmc_ident_data; 933 934 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 935 ("SDIO_INIT: error %d, %08x %08x %08x %08x\n", 936 err, mmcio->cmd.resp[0], 937 mmcio->cmd.resp[1], 938 mmcio->cmd.resp[2], 939 mmcio->cmd.resp[3])); 940 941 /* 942 * Error here means that this card is not SDIO, 943 * so proceed with memory init as if nothing has happened 944 */ 945 if (err != MMC_ERR_NONE) { 946 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 947 break; 948 } 949 mmcp->card_features |= CARD_FEATURE_SDIO; 950 uint32_t ioifcond = mmcio->cmd.resp[0]; 951 uint32_t io_ocr = ioifcond & R4_IO_OCR_MASK; 952 953 mmcp->sdio_func_count = R4_IO_NUM_FUNCTIONS(ioifcond); 954 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 955 ("SDIO card: %d functions\n", mmcp->sdio_func_count)); 956 if (io_ocr == 0) { 957 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 958 ("SDIO OCR invalid, retrying\n")); 959 break; /* Retry */ 960 } 961 962 if (io_ocr != 0 && mmcp->io_ocr == 0) { 963 mmcp->io_ocr = io_ocr; 964 break; /* Retry, this time with non-0 OCR */ 965 } 966 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 967 ("SDIO OCR: %08x\n", mmcp->io_ocr)); 968 969 if (ioifcond & R4_IO_MEM_PRESENT) { 970 /* Combo card -- proceed to memory initialization */ 971 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 972 } else { 973 /* No memory portion -- get RCA and select card */ 974 PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); 975 } 976 break; 977 } 978 case PROBE_MMC_INIT: 979 { 980 mmcio = &done_ccb->mmcio; 981 err = mmcio->cmd.error; 982 struct mmc_params *mmcp = &path->device->mmc_ident_data; 983 984 if (err != MMC_ERR_NONE) { 985 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 986 ("MMC_INIT: error %d, resp %08x\n", 987 err, mmcio->cmd.resp[0])); 988 PROBE_SET_ACTION(softc, PROBE_INVALID); 989 break; 990 } 991 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 992 ("MMC card, OCR %08x\n", mmcio->cmd.resp[0])); 993 994 if (mmcp->card_ocr == 0) { 995 /* We haven't sent the OCR to the card yet -- do it */ 996 mmcp->card_ocr = mmcio->cmd.resp[0]; 997 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 998 ("-> sending OCR to card\n")); 999 break; 1000 } 1001 1002 if (!(mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY)) { 1003 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1004 ("Card is still powering up\n")); 1005 break; 1006 } 1007 1008 mmcp->card_features |= CARD_FEATURE_MMC | CARD_FEATURE_MEMORY; 1009 PROBE_SET_ACTION(softc, PROBE_GET_CID); 1010 break; 1011 } 1012 case PROBE_SEND_APP_OP_COND: 1013 { 1014 mmcio = &done_ccb->mmcio; 1015 err = mmcio->cmd.error; 1016 1017 if (err != MMC_ERR_NONE) { 1018 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1019 ("APP_OP_COND: error %d, resp %08x\n", 1020 err, mmcio->cmd.resp[0])); 1021 PROBE_SET_ACTION(softc, PROBE_MMC_INIT); 1022 break; 1023 } 1024 1025 if (!(softc->flags & PROBE_FLAG_ACMD_SENT)) { 1026 /* Don't change the state */ 1027 softc->flags |= PROBE_FLAG_ACMD_SENT; 1028 break; 1029 } 1030 1031 softc->flags &= ~PROBE_FLAG_ACMD_SENT; 1032 if ((mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY) || 1033 (mmcio->cmd.arg & MMC_OCR_VOLTAGE) == 0) { 1034 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1035 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1036 ("Card OCR: %08x\n", mmcio->cmd.resp[0])); 1037 if (mmcp->card_ocr == 0) { 1038 mmcp->card_ocr = mmcio->cmd.resp[0]; 1039 /* Now when we know OCR that we want -- send it to card */ 1040 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1041 ("-> sending OCR to card\n")); 1042 } else { 1043 /* We already know the OCR and despite of that we 1044 * are processing the answer to ACMD41 -> move on 1045 */ 1046 PROBE_SET_ACTION(softc, PROBE_GET_CID); 1047 } 1048 /* Getting an answer to ACMD41 means the card has memory */ 1049 mmcp->card_features |= CARD_FEATURE_MEMORY; 1050 1051 /* Standard capacity vs High Capacity memory card */ 1052 if (mmcio->cmd.resp[0] & MMC_OCR_CCS) { 1053 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1054 ("Card is SDHC\n")); 1055 mmcp->card_features |= CARD_FEATURE_SDHC; 1056 } 1057 1058 /* Whether the card supports 1.8V signaling */ 1059 if (mmcio->cmd.resp[0] & MMC_OCR_S18A) { 1060 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1061 ("Card supports 1.8V signaling\n")); 1062 mmcp->card_features |= CARD_FEATURE_18V; 1063 if (softc->flags & PROBE_FLAG_HOST_CAN_DO_18V) { 1064 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1065 ("Host supports 1.8V signaling. Switch voltage!\n")); 1066 done_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1067 done_ccb->ccb_h.flags = CAM_DIR_NONE; 1068 done_ccb->ccb_h.retry_count = 0; 1069 done_ccb->ccb_h.timeout = 100; 1070 done_ccb->ccb_h.cbfcnp = NULL; 1071 done_ccb->cts.proto_specific.mmc.ios.vccq = vccq_180; 1072 done_ccb->cts.proto_specific.mmc.ios_valid = MMC_VCCQ; 1073 xpt_action(done_ccb); 1074 } 1075 } 1076 } else { 1077 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1078 ("Card not ready: %08x\n", mmcio->cmd.resp[0])); 1079 /* Send CMD55+ACMD41 once again */ 1080 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 1081 } 1082 1083 break; 1084 } 1085 case PROBE_GET_CID: /* XXX move to mmc_da */ 1086 { 1087 mmcio = &done_ccb->mmcio; 1088 err = mmcio->cmd.error; 1089 1090 if (err != MMC_ERR_NONE) { 1091 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1092 ("PROBE_GET_CID: error %d\n", err)); 1093 PROBE_SET_ACTION(softc, PROBE_INVALID); 1094 break; 1095 } 1096 1097 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1098 memcpy(mmcp->card_cid, mmcio->cmd.resp, 4 * sizeof(uint32_t)); 1099 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1100 ("CID %08x%08x%08x%08x\n", 1101 mmcp->card_cid[0], 1102 mmcp->card_cid[1], 1103 mmcp->card_cid[2], 1104 mmcp->card_cid[3])); 1105 if (mmcp->card_features & CARD_FEATURE_MMC) 1106 PROBE_SET_ACTION(softc, PROBE_MMC_SET_RELATIVE_ADDR); 1107 else 1108 PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); 1109 break; 1110 } 1111 case PROBE_SEND_RELATIVE_ADDR: { 1112 mmcio = &done_ccb->mmcio; 1113 err = mmcio->cmd.error; 1114 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1115 uint16_t rca = mmcio->cmd.resp[0] >> 16; 1116 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1117 ("Card published RCA: %u\n", rca)); 1118 path->device->mmc_ident_data.card_rca = rca; 1119 if (err != MMC_ERR_NONE) { 1120 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1121 ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); 1122 PROBE_SET_ACTION(softc, PROBE_INVALID); 1123 break; 1124 } 1125 1126 /* If memory is present, get CSD, otherwise select card */ 1127 if (mmcp->card_features & CARD_FEATURE_MEMORY) 1128 PROBE_SET_ACTION(softc, PROBE_GET_CSD); 1129 else 1130 PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); 1131 break; 1132 } 1133 case PROBE_MMC_SET_RELATIVE_ADDR: 1134 mmcio = &done_ccb->mmcio; 1135 err = mmcio->cmd.error; 1136 if (err != MMC_ERR_NONE) { 1137 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1138 ("PROBE_MMC_SET_RELATIVE_ADDR: error %d\n", err)); 1139 PROBE_SET_ACTION(softc, PROBE_INVALID); 1140 break; 1141 } 1142 path->device->mmc_ident_data.card_rca = MMC_PROPOSED_RCA; 1143 PROBE_SET_ACTION(softc, PROBE_GET_CSD); 1144 break; 1145 case PROBE_GET_CSD: { 1146 mmcio = &done_ccb->mmcio; 1147 err = mmcio->cmd.error; 1148 1149 if (err != MMC_ERR_NONE) { 1150 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1151 ("PROBE_GET_CSD: error %d\n", err)); 1152 PROBE_SET_ACTION(softc, PROBE_INVALID); 1153 break; 1154 } 1155 1156 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1157 memcpy(mmcp->card_csd, mmcio->cmd.resp, 4 * sizeof(uint32_t)); 1158 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1159 ("CSD %08x%08x%08x%08x\n", 1160 mmcp->card_csd[0], 1161 mmcp->card_csd[1], 1162 mmcp->card_csd[2], 1163 mmcp->card_csd[3])); 1164 PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); 1165 break; 1166 } 1167 case PROBE_SELECT_CARD: { 1168 mmcio = &done_ccb->mmcio; 1169 err = mmcio->cmd.error; 1170 if (err != MMC_ERR_NONE) { 1171 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1172 ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); 1173 PROBE_SET_ACTION(softc, PROBE_INVALID); 1174 break; 1175 } 1176 1177 PROBE_SET_ACTION(softc, PROBE_DONE); 1178 break; 1179 } 1180 default: 1181 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1182 ("mmcprobe_done: invalid action state 0x%x\n", softc->action)); 1183 panic("default: case in mmc_probe_done()"); 1184 } 1185 1186 if (softc->action == PROBE_INVALID && 1187 (path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { 1188 xpt_async(AC_LOST_DEVICE, path, NULL); 1189 } 1190 1191 if (softc->action != PROBE_INVALID) 1192 xpt_schedule(periph, priority); 1193 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ 1194 int frozen = cam_release_devq(path, 0, 0, 0, FALSE); 1195 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1196 ("mmcprobe_done: remaining freeze count %d\n", frozen)); 1197 1198 if (softc->action == PROBE_DONE) { 1199 /* Notify the system that the device is found! */ 1200 if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { 1201 path->device->flags &= ~CAM_DEV_UNCONFIGURED; 1202 xpt_acquire_device(path->device); 1203 done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; 1204 xpt_action(done_ccb); 1205 xpt_async(AC_FOUND_DEVICE, path, done_ccb); 1206 } 1207 } 1208 xpt_release_ccb(done_ccb); 1209 if (softc->action == PROBE_DONE || softc->action == PROBE_INVALID) { 1210 cam_periph_invalidate(periph); 1211 cam_periph_release_locked(periph); 1212 } 1213 } 1214 1215 void 1216 mmc_path_inq(struct ccb_pathinq *cpi, const char *hba, 1217 const struct cam_sim *sim, size_t maxio) 1218 { 1219 1220 cpi->version_num = 1; 1221 cpi->hba_inquiry = 0; 1222 cpi->target_sprt = 0; 1223 cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN; 1224 cpi->hba_eng_cnt = 0; 1225 cpi->max_target = 0; 1226 cpi->max_lun = 0; 1227 cpi->initiator_id = 1; 1228 cpi->maxio = maxio; 1229 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 1230 strncpy(cpi->hba_vid, hba, HBA_IDLEN); 1231 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 1232 cpi->unit_number = cam_sim_unit(sim); 1233 cpi->bus_id = cam_sim_bus(sim); 1234 cpi->protocol = PROTO_MMCSD; 1235 cpi->protocol_version = SCSI_REV_0; 1236 cpi->transport = XPORT_MMCSD; 1237 cpi->transport_version = 1; 1238 1239 cpi->base_transfer_speed = 100; /* XXX WTF? */ 1240 1241 cpi->ccb_h.status = CAM_REQ_CMP; 1242 }
Cache object: 64d39522a0028d88b5b8e3ac573c43dc
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]