FreeBSD/Linux Kernel Cross Reference
sys/cam/scsi/scsi_sa.h
1 /*-
2 * Structure and function declarations for the
3 * SCSI Sequential Access Peripheral driver for CAM.
4 *
5 * Copyright (c) 1999, 2000 Matthew Jacob
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 * $FreeBSD$
30 */
31
32 #ifndef _SCSI_SCSI_SA_H
33 #define _SCSI_SCSI_SA_H 1
34
35 #include <sys/cdefs.h>
36
37 struct scsi_read_block_limits
38 {
39 u_int8_t opcode;
40 u_int8_t byte2;
41 u_int8_t unused[3];
42 u_int8_t control;
43 };
44
45 struct scsi_read_block_limits_data
46 {
47 u_int8_t gran;
48 #define RBL_GRAN_MASK 0x1F
49 #define RBL_GRAN(rblim) ((rblim)->gran & RBL_GRAN_MASK)
50 u_int8_t maximum[3];
51 u_int8_t minimum[2];
52 };
53
54 struct scsi_sa_rw
55 {
56 u_int8_t opcode;
57 u_int8_t sli_fixed;
58 #define SAR_SLI 0x02
59 #define SARW_FIXED 0x01
60 u_int8_t length[3];
61 u_int8_t control;
62 };
63
64 struct scsi_load_unload
65 {
66 u_int8_t opcode;
67 u_int8_t immediate;
68 #define SLU_IMMED 0x01
69 u_int8_t reserved[2];
70 u_int8_t eot_reten_load;
71 #define SLU_EOT 0x04
72 #define SLU_RETEN 0x02
73 #define SLU_LOAD 0x01
74 u_int8_t control;
75 };
76
77 struct scsi_rewind
78 {
79 u_int8_t opcode;
80 u_int8_t immediate;
81 #define SREW_IMMED 0x01
82 u_int8_t reserved[3];
83 u_int8_t control;
84 };
85
86 typedef enum {
87 SS_BLOCKS,
88 SS_FILEMARKS,
89 SS_SEQFILEMARKS,
90 SS_EOD,
91 SS_SETMARKS,
92 SS_SEQSETMARKS
93 } scsi_space_code;
94
95 struct scsi_space
96 {
97 u_int8_t opcode;
98 u_int8_t code;
99 #define SREW_IMMED 0x01
100 u_int8_t count[3];
101 u_int8_t control;
102 };
103
104 struct scsi_write_filemarks
105 {
106 u_int8_t opcode;
107 u_int8_t byte2;
108 #define SWFMRK_IMMED 0x01
109 #define SWFMRK_WSMK 0x02
110 u_int8_t num_marks[3];
111 u_int8_t control;
112 };
113
114 /*
115 * Reserve and release unit have the same exact cdb format, but different
116 * opcodes.
117 */
118 struct scsi_reserve_release_unit
119 {
120 u_int8_t opcode;
121 u_int8_t lun_thirdparty;
122 #define SRRU_LUN_MASK 0xE0
123 #define SRRU_3RD_PARTY 0x10
124 #define SRRU_3RD_SHAMT 1
125 #define SRRU_3RD_MASK 0xE
126 u_int8_t reserved[3];
127 u_int8_t control;
128 };
129
130 /*
131 * Erase a tape
132 */
133 struct scsi_erase
134 {
135 u_int8_t opcode;
136 u_int8_t lun_imm_long;
137 #define SE_LUN_MASK 0xE0
138 #define SE_LONG 0x1
139 #define SE_IMMED 0x2
140 u_int8_t reserved[3];
141 u_int8_t control;
142 };
143
144 /*
145 * Dev specific mode page masks.
146 */
147 #define SMH_SA_WP 0x80
148 #define SMH_SA_BUF_MODE_MASK 0x70
149 #define SMH_SA_BUF_MODE_NOBUF 0x00
150 #define SMH_SA_BUF_MODE_SIBUF 0x10 /* Single-Initiator buffering */
151 #define SMH_SA_BUF_MODE_MIBUF 0x20 /* Multi-Initiator buffering */
152 #define SMH_SA_SPEED_MASK 0x0F
153 #define SMH_SA_SPEED_DEFAULT 0x00
154
155 /*
156 * Sequential-access specific mode page numbers.
157 */
158 #define SA_DEVICE_CONFIGURATION_PAGE 0x10
159 #define SA_MEDIUM_PARTITION_PAGE_1 0x11
160 #define SA_MEDIUM_PARTITION_PAGE_2 0x12
161 #define SA_MEDIUM_PARTITION_PAGE_3 0x13
162 #define SA_MEDIUM_PARTITION_PAGE_4 0x14
163 #define SA_DATA_COMPRESSION_PAGE 0x0f /* SCSI-3 */
164
165 /*
166 * Mode page definitions.
167 */
168
169 /* See SCSI-II spec 9.3.3.1 */
170 struct scsi_dev_conf_page {
171 u_int8_t pagecode; /* 0x10 */
172 u_int8_t pagelength; /* 0x0e */
173 u_int8_t byte2; /* CAP, CAF, Active Format */
174 u_int8_t active_partition;
175 u_int8_t wb_full_ratio;
176 u_int8_t rb_empty_ratio;
177 u_int8_t wrdelay_time[2];
178 u_int8_t byte8;
179 #define SA_DBR 0x80 /* data buffer recovery */
180 #define SA_BIS 0x40 /* block identifiers supported */
181 #define SA_RSMK 0x20 /* report setmarks */
182 #define SA_AVC 0x10 /* automatic velocity control */
183 #define SA_SOCF_MASK 0xc0 /* stop on consecutive formats */
184 #define SA_RBO 0x20 /* recover buffer order */
185 #define SA_REW 0x10 /* report early warning */
186 u_int8_t gap_size;
187 u_int8_t byte10;
188 u_int8_t ew_bufsize[3];
189 u_int8_t sel_comp_alg;
190 #define SA_COMP_NONE 0x00
191 #define SA_COMP_DEFAULT 0x01
192 /* the following is 'reserved' in SCSI-2 but is defined in SSC-r22 */
193 u_int8_t extra_wp;
194 #define SA_ASOC_WP 0x04 /* Associated Write Protect */
195 #define SA_PERS_WP 0x02 /* Persistent Write Protect */
196 #define SA_PERM_WP 0x01 /* Permanent Write Protect */
197 };
198
199 /* from SCSI-3: SSC-Rev10 (6/97) */
200 struct scsi_data_compression_page {
201 u_int8_t page_code; /* 0x0f */
202 u_int8_t page_length; /* 0x0e */
203 u_int8_t dce_and_dcc;
204 #define SA_DCP_DCE 0x80 /* Data compression enable */
205 #define SA_DCP_DCC 0x40 /* Data compression capable */
206 u_int8_t dde_and_red;
207 #define SA_DCP_DDE 0x80 /* Data decompression enable */
208 #define SA_DCP_RED_MASK 0x60 /* Report Exception on Decomp. */
209 #define SA_DCP_RED_SHAMT 5
210 #define SA_DCP_RED_0 0x00
211 #define SA_DCP_RED_1 0x20
212 #define SA_DCP_RED_2 0x40
213 u_int8_t comp_algorithm[4];
214 u_int8_t decomp_algorithm[4];
215 u_int8_t reserved[4];
216 };
217
218 typedef union {
219 struct { u_int8_t pagecode, pagelength; } hdr;
220 struct scsi_dev_conf_page dconf;
221 struct scsi_data_compression_page dcomp;
222 } sa_comp_t;
223
224 struct scsi_tape_read_position {
225 u_int8_t opcode; /* READ_POSITION */
226 u_int8_t byte1; /* set LSB to read hardware block pos */
227 u_int8_t reserved[8];
228 };
229
230 struct scsi_tape_position_data { /* Short Form */
231 u_int8_t flags;
232 #define SA_RPOS_BOP 0x80 /* Beginning of Partition */
233 #define SA_RPOS_EOP 0x40 /* End of Partition */
234 #define SA_RPOS_BCU 0x20 /* Block Count Unknown (SCSI3) */
235 #define SA_RPOS_BYCU 0x10 /* Byte Count Unknown (SCSI3) */
236 #define SA_RPOS_BPU 0x04 /* Block Position Unknown */
237 #define SA_RPOS_PERR 0x02 /* Position Error (SCSI3) */
238 #define SA_RPOS_UNCERTAIN SA_RPOS_BPU
239 u_int8_t partition;
240 u_int8_t reserved[2];
241 u_int8_t firstblk[4];
242 u_int8_t lastblk[4];
243 u_int8_t reserved2;
244 u_int8_t nbufblk[3];
245 u_int8_t nbufbyte[4];
246 };
247
248 struct scsi_tape_locate {
249 u_int8_t opcode;
250 u_int8_t byte1;
251 #define SA_SPOS_IMMED 0x01
252 #define SA_SPOS_CP 0x02
253 #define SA_SPOS_BT 0x04
254 u_int8_t reserved1;
255 u_int8_t blkaddr[4];
256 u_int8_t reserved2;
257 u_int8_t partition;
258 u_int8_t control;
259 };
260
261 /*
262 * Opcodes
263 */
264 #define REWIND 0x01
265 #define READ_BLOCK_LIMITS 0x05
266 #define SA_READ 0x08
267 #define SA_WRITE 0x0A
268 #define WRITE_FILEMARKS 0x10
269 #define SPACE 0x11
270 #define RESERVE_UNIT 0x16
271 #define RELEASE_UNIT 0x17
272 #define ERASE 0x19
273 #define LOAD_UNLOAD 0x1B
274 #define LOCATE 0x2B
275 #define READ_POSITION 0x34
276
277 /*
278 * Tape specific density codes- only enough of them here to recognize
279 * some specific older units so we can choose 2FM@EOD or FIXED blocksize
280 * quirks.
281 */
282 #define SCSI_DENSITY_HALFINCH_800 0x01
283 #define SCSI_DENSITY_HALFINCH_1600 0x02
284 #define SCSI_DENSITY_HALFINCH_6250 0x03
285 #define SCSI_DENSITY_HALFINCH_6250C 0xC3 /* HP Compressed 6250 */
286 #define SCSI_DENSITY_QIC_11_4TRK 0x04
287 #define SCSI_DENSITY_QIC_11_9TRK 0x84 /* Vendor Unique Emulex */
288 #define SCSI_DENSITY_QIC_24 0x05
289 #define SCSI_DENSITY_HALFINCH_PE 0x06
290 #define SCSI_DENSITY_QIC_120 0x0f
291 #define SCSI_DENSITY_QIC_150 0x10
292 #define SCSI_DENSITY_QIC_525_320 0x11
293 #define SCSI_DENSITY_QIC_1320 0x12
294 #define SCSI_DENSITY_QIC_2GB 0x22
295 #define SCSI_DENSITY_QIC_4GB 0x26
296 #define SCSI_DENSITY_QIC_3080 0x29
297
298 __BEGIN_DECLS
299 void scsi_read_block_limits(struct ccb_scsiio *, u_int32_t,
300 void (*cbfcnp)(struct cam_periph *, union ccb *),
301 u_int8_t, struct scsi_read_block_limits_data *,
302 u_int8_t , u_int32_t);
303
304 void scsi_sa_read_write(struct ccb_scsiio *csio, u_int32_t retries,
305 void (*cbfcnp)(struct cam_periph *, union ccb *),
306 u_int8_t tag_action, int readop, int sli,
307 int fixed, u_int32_t length, u_int8_t *data_ptr,
308 u_int32_t dxfer_len, u_int8_t sense_len,
309 u_int32_t timeout);
310
311 void scsi_rewind(struct ccb_scsiio *csio, u_int32_t retries,
312 void (*cbfcnp)(struct cam_periph *, union ccb *),
313 u_int8_t tag_action, int immediate, u_int8_t sense_len,
314 u_int32_t timeout);
315
316 void scsi_space(struct ccb_scsiio *csio, u_int32_t retries,
317 void (*cbfcnp)(struct cam_periph *, union ccb *),
318 u_int8_t tag_action, scsi_space_code code,
319 u_int32_t count, u_int8_t sense_len, u_int32_t timeout);
320
321 void scsi_load_unload(struct ccb_scsiio *csio, u_int32_t retries,
322 void (*cbfcnp)(struct cam_periph *, union ccb *),
323 u_int8_t tag_action, int immediate, int eot,
324 int reten, int load, u_int8_t sense_len,
325 u_int32_t timeout);
326
327 void scsi_write_filemarks(struct ccb_scsiio *csio, u_int32_t retries,
328 void (*cbfcnp)(struct cam_periph *, union ccb *),
329 u_int8_t tag_action, int immediate, int setmark,
330 u_int32_t num_marks, u_int8_t sense_len,
331 u_int32_t timeout);
332
333 void scsi_reserve_release_unit(struct ccb_scsiio *csio, u_int32_t retries,
334 void (*cbfcnp)(struct cam_periph *,
335 union ccb *), u_int8_t tag_action,
336 int third_party, int third_party_id,
337 u_int8_t sense_len, u_int32_t timeout,
338 int reserve);
339
340 void scsi_erase(struct ccb_scsiio *csio, u_int32_t retries,
341 void (*cbfcnp)(struct cam_periph *, union ccb *),
342 u_int8_t tag_action, int immediate, int long_erase,
343 u_int8_t sense_len, u_int32_t timeout);
344
345 void scsi_data_comp_page(struct scsi_data_compression_page *page,
346 u_int8_t dce, u_int8_t dde, u_int8_t red,
347 u_int32_t comp_algorithm,
348 u_int32_t decomp_algorithm);
349
350 void scsi_read_position(struct ccb_scsiio *csio, u_int32_t retries,
351 void (*cbfcnp)(struct cam_periph *, union ccb *),
352 u_int8_t tag_action, int hardsoft,
353 struct scsi_tape_position_data *sbp,
354 u_int8_t sense_len, u_int32_t timeout);
355
356 void scsi_set_position(struct ccb_scsiio *csio, u_int32_t retries,
357 void (*cbfcnp)(struct cam_periph *, union ccb *),
358 u_int8_t tag_action, int hardsoft, u_int32_t blkno,
359 u_int8_t sense_len, u_int32_t timeout);
360 __END_DECLS
361
362 #endif /* _SCSI_SCSI_SA_H */
Cache object: e2f3fb1c27b89fd7cc97812e274e5e4a
|