Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/conf/options
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2 # 3 # On the handling of kernel options 4 # 5 # All kernel options should be listed in LINT, with suitable 6 # descriptions. Negative options (options that make some code not 7 # compile) should be commented out; LINT should compile as much code 8 # as possible. Try to structure option-using code so that a single 9 # option only switch code on, or only switch code off, to make it 10 # possible to have a full compile-test. If necessary, you can include 11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code 12 # coverage. 13 # 14 # All new options shall also be listed in either "conf/options" or 15 # "platform/<platform>/conf/options". Options that affect a single 16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17 # options that affect multiple files should either go in 18 # "opt_global.h" if this is a kernel-wide option (used just about 19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20 # only some files. Note that the effect of listing only an option 21 # without a header-file-name in conf/options (and cousins) is that the 22 # last convention is followed. 23 # 24 # This handling scheme is not yet fully implemented. 25 # 26 # 27 # Format of this file: 28 # Option name filename 29 # 30 # If filename is missing, the default is 31 # opt_<name-of-option-in-lower-case>.h 32 33 # Adaptec Array Controller driver options 34 AAC_DEBUG opt_aac.h 35 36 # Adaptec aic7xxx SCSI controller options 37 AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40 AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43 AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46 AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48 AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51 AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54 # Adaptec aic79xx SCSI controller options 55 AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57 AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60 AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63 AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68 AMR_DEBUG opt_amr.h 69 TWA_DEBUG opt_twa.h 70 71 #options for ACPI support 72 ACPI_DEBUG opt_acpi.h 73 ACPI_NO_SEMAPHORES opt_acpi.h 74 ACPI_ENABLE_PCI opt_acpi.h 75 76 # Miscellaneous options. 77 COMPAT_43 opt_compat.h 78 COMPILING_LINT opt_lint.h 79 DDB 80 DDB_TRACE 81 DDB_UNATTENDED opt_ddb.h 82 GDB_REMOTE_CHAT opt_ddb.h 83 KTRACE 84 LIBICONV 85 MD_NSECT opt_md.h 86 MD_ROOT opt_md.h 87 MD_ROOT_SIZE opt_md.h 88 MFI_DEBUG opt_mfi.h 89 NSWAPDEV opt_swap.h 90 NSWBUF_MIN opt_swap.h 91 PPS_SYNC opt_ntp.h 92 QUOTA 93 SUIDDIR opt_suiddir.h 94 SYSVMSG opt_sysvipc.h 95 SYSVSEM opt_sysvipc.h 96 SYSVSHM opt_sysvipc.h 97 SHMMIN opt_sysvipc.h 98 SHMMNI opt_sysvipc.h 99 SHMSEG opt_sysvipc.h 100 SEMMAP opt_sysvipc.h 101 SEMMNI opt_sysvipc.h 102 SEMMNS opt_sysvipc.h 103 SEMMNU opt_sysvipc.h 104 SEMMSL opt_sysvipc.h 105 SEMOPM opt_sysvipc.h 106 SEMUME opt_sysvipc.h 107 MSGMNB opt_sysvipc.h 108 MSGMNI opt_sysvipc.h 109 MSGSEG opt_sysvipc.h 110 MSGSSZ opt_sysvipc.h 111 MSGTQL opt_sysvipc.h 112 UCONSOLE 113 ICMP_BANDLIM 114 SHOW_BUSYBUFS 115 DIRECTIO opt_directio.h 116 117 # POSIX kernel options 118 P1003_1B opt_posix.h 119 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h 120 _KPOSIX_VERSION opt_posix.h 121 122 # Do we want the config file compiled into the kernel? 123 INCLUDE_CONFIG_FILE opt_config.h 124 125 # Options for static file systems. These should only be used at config 126 # time, since the corresponding lkms cannot work if there are any static 127 # dependencies. Unusability is enforced by hiding the defines for the 128 # options in a never-included header. 129 EXT2FS opt_dontuse.h 130 FDESC opt_dontuse.h 131 HAMMER opt_dontuse.h 132 HPFS opt_dontuse.h 133 MFS opt_dontuse.h 134 MSDOSFS opt_dontuse.h 135 NTFS opt_dontuse.h 136 NULLFS opt_dontuse.h 137 NWFS opt_dontuse.h 138 PORTAL opt_dontuse.h 139 PROCFS opt_dontuse.h 140 PUFFS opt_dontuse.h 141 SMBFS opt_dontuse.h 142 TMPFS opt_dontuse.h 143 UDF opt_dontuse.h 144 145 # These static filesystems has one slightly bogus static dependency in 146 # sys/platform/.../i386/autoconf.c. If any of these filesystems are 147 # statically compiled into the kernel, code for mounting them as root 148 # filesystems will be enabled - but look below. Boot-code is purposely 149 # unavailable for the LKM-based versions. 150 CD9660 151 FFS 152 NFS 153 154 # filesystems and libiconv bridge 155 CD9660_ICONV opt_dontuse.h 156 MSDOSFS_ICONV opt_dontuse.h 157 NTFS_ICONV opt_dontuse.h 158 159 # SMB/CIFS requester 160 NETSMB opt_netsmb.h 161 NETSMBCRYPTO opt_netsmb.h 162 163 # If you are following the conditions in the copyright, 164 # you can enable soft-updates which will speed up a lot of things 165 # and make the system safer from crashes at the same time. 166 # otherwise a STUB module will be compiled in. 167 SOFTUPDATES opt_ffs.h 168 169 # Enable fast hash lookups for large directories on UFS-based filesystems. 170 UFS_DIRHASH opt_ufs.h 171 172 # The above static dependencies are planned removed, with a 173 # <filesystem>_ROOT option to control if it usable as root. This list 174 # allows these options to be present in config files already (though 175 # they won't make any difference yet). 176 FFS_ROOT opt_ffs.h 177 NFS_ROOT opt_nfsroot.h 178 179 # The union static file system has bogus static dependencies, so it isn't 180 # hidden yet. 181 UNION 182 183 # Options used only in subr_param.c. 184 HZ opt_param.h 185 MAXFILES opt_param.h 186 NBUF opt_param.h 187 NMBCLUSTERS opt_param.h 188 NMBUFS opt_param.h 189 VM_BCACHE_SIZE_MAX opt_param.h 190 VM_SWZONE_SIZE_MAX opt_param.h 191 MAXUSERS 192 DFLDSIZ opt_param.h 193 MAXDSIZ opt_param.h 194 MAXSSIZ opt_param.h 195 196 # Generic SCSI options. 197 CAM_MAX_HIGHPOWER opt_cam.h 198 CAMDEBUG opt_cam.h 199 CAM_DEBUG_DELAY opt_cam.h 200 CAM_DEBUG_BUS opt_cam.h 201 CAM_DEBUG_TARGET opt_cam.h 202 CAM_DEBUG_LUN opt_cam.h 203 CAM_DEBUG_FLAGS opt_cam.h 204 SCSI_DELAY opt_scsi.h 205 SCSI_NO_SENSE_STRINGS opt_scsi.h 206 SCSI_NO_OP_STRINGS opt_scsi.h 207 208 # iSCSI options 209 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 210 211 # Options used only in cam/scsi/scsi_cd.c 212 CHANGER_MIN_BUSY_SECONDS opt_cd.h 213 CHANGER_MAX_BUSY_SECONDS opt_cd.h 214 215 # Options used only in cam/scsi/scsi_sa.c. 216 SA_IO_TIMEOUT opt_sa.h 217 SA_SPACE_TIMEOUT opt_sa.h 218 SA_REWIND_TIMEOUT opt_sa.h 219 SA_ERASE_TIMEOUT opt_sa.h 220 SA_1FM_AT_EOD opt_sa.h 221 222 # Options used only in cam/scsi/scsi_pt.c 223 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 224 225 # Options used only in cam/scsi/scsi_ses.c 226 SES_ENABLE_PASSTHROUGH opt_ses.h 227 228 # Options used in dev/sym/ (Symbios SCSI driver). 229 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 230 # Allows the ncr to take precedence 231 # 1 (1<<0) -> 810a, 860 232 # 2 (1<<1) -> 825a, 875, 885, 895 233 # 4 (1<<2) -> 895a, 896, 1510d 234 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 235 # disabled:0 (default), enabled:1 236 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 237 # disabled:0, enabled:1 (default) 238 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 239 # default:8, range:[1..64] 240 241 # Options used only in pci/ncr.c 242 SCSI_NCR_DEBUG opt_ncr.h 243 SCSI_NCR_MAX_SYNC opt_ncr.h 244 SCSI_NCR_MAX_WIDE opt_ncr.h 245 SCSI_NCR_MYADDR opt_ncr.h 246 247 # Options used only in pci/isp_pci.c 248 ISP_TARGET_MODE opt_isp.h 249 250 # Options used in the 'nata' ATA/ATAPI driver 251 ATA_STATIC_ID opt_ata.h 252 253 # Net stuff. 254 # altq stuff 255 ALTQ opt_global.h 256 ALTQ_CBQ opt_altq.h 257 ALTQ_RED opt_altq.h 258 ALTQ_RIO opt_altq.h 259 ALTQ_HFSC opt_altq.h 260 ALTQ_PRIQ opt_altq.h 261 ALTQ_FAIRQ opt_altq.h 262 ALTQ_NOPCC opt_altq.h 263 ALTQ_DEBUG opt_altq.h 264 265 ACCEPT_FILTER_DATA 266 ACCEPT_FILTER_HTTP 267 BOOTP opt_bootp.h 268 BOOTP_COMPAT opt_bootp.h 269 BOOTP_NFSROOT opt_bootp.h 270 BOOTP_NFSV3 opt_bootp.h 271 BOOTP_WIRED_TO opt_bootp.h 272 CARP opt_carp.h 273 ETHER_II opt_ef.h 274 ETHER_8023 opt_ef.h 275 ETHER_8022 opt_ef.h 276 ETHER_SNAP opt_ef.h 277 MROUTING opt_mrouting.h 278 PIM opt_mrouting.h 279 INET opt_inet.h 280 INET6 opt_inet6.h 281 IPSEC opt_ipsec.h 282 IPSEC_ESP opt_ipsec.h 283 IPSEC_DEBUG opt_ipsec.h 284 IPSEC_FILTERGIF opt_ipsec.h 285 FAST_IPSEC opt_ipsec.h 286 IPDIVERT 287 DUMMYNET opt_ipdn.h 288 DUMMYNET_DEBUG opt_ipdn.h 289 IPFIREWALL opt_ipfw.h 290 IPFIREWALL_DEBUG opt_ipfw.h 291 IPFIREWALL_VERBOSE opt_ipfw.h 292 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 293 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 294 IPV6FIREWALL opt_ip6fw.h 295 IPV6FIREWALL_VERBOSE opt_ip6fw.h 296 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 297 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 298 IPSTEALTH 299 IPX opt_ipx.h 300 IPXIP opt_ipx.h 301 IPTUNNEL opt_ipx.h 302 LIBMCHAIN 303 MPLS opt_mpls.h 304 NCP opt_ncp.h 305 PPP_BSDCOMP opt_ppp.h 306 PPP_DEFLATE opt_ppp.h 307 PPP_FILTER opt_ppp.h 308 SLIP_IFF_OPTS opt_slip.h 309 TCPDEBUG 310 TCP_SIGNATURE opt_inet.h 311 TCP_DROP_SYNFIN opt_tcp_input.h 312 313 XBONEHACK 314 MBUF_STRESS_TEST opt_mbuf_stress_test.h 315 316 # (New netgraph, port still in progress) 317 # 318 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 319 # Each netgraph node type can be either be compiled into the kernel 320 # or loaded dynamically. To get the former, include the corresponding 321 # option below. Each type has its own man page, e.g. ng_async(4). 322 NETGRAPH7 323 NETGRAPH7_DEBUG opt_netgraph.h 324 NETGRAPH7_ASYNC opt_netgraph.h 325 NETGRAPH7_ATMLLC opt_netgraph.h 326 NETGRAPH7_ATM_ATMPIF opt_netgraph.h 327 NETGRAPH7_BLUETOOTH opt_netgraph.h 328 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 329 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 330 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 331 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 332 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 333 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 334 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 335 NETGRAPH7_BPF opt_netgraph.h 336 NETGRAPH7_BRIDGE opt_netgraph.h 337 NETGRAPH7_CAR opt_netgraph.h 338 NETGRAPH7_CISCO opt_netgraph.h 339 NETGRAPH7_DEFLATE opt_netgraph.h 340 NETGRAPH7_DEVICE opt_netgraph.h 341 NETGRAPH7_ECHO opt_netgraph.h 342 NETGRAPH7_EIFACE opt_netgraph.h 343 NETGRAPH7_ETF opt_netgraph.h 344 NETGRAPH7_ETHER opt_netgraph.h 345 NETGRAPH7_FEC opt_netgraph.h 346 NETGRAPH7_FRAME_RELAY opt_netgraph.h 347 NETGRAPH7_GIF opt_netgraph.h 348 NETGRAPH7_GIF_DEMUX opt_netgraph.h 349 NETGRAPH7_HOLE opt_netgraph.h 350 NETGRAPH7_HUB opt_netgraph.h 351 NETGRAPH7_IFACE opt_netgraph.h 352 NETGRAPH7_IP_INPUT opt_netgraph.h 353 NETGRAPH7_IPFW opt_netgraph.h 354 NETGRAPH7_KSOCKET opt_netgraph.h 355 NETGRAPH7_L2TP opt_netgraph.h 356 NETGRAPH7_LMI opt_netgraph.h 357 # MPPC compression requires proprietary files (not included) 358 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 359 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 360 NETGRAPH7_NAT opt_netgraph.h 361 NETGRAPH7_NETFLOW opt_netgraph.h 362 NETGRAPH7_ONE2MANY opt_netgraph.h 363 NETGRAPH7_PPP opt_netgraph.h 364 NETGRAPH7_PPPOE opt_netgraph.h 365 NETGRAPH7_PPTPGRE opt_netgraph.h 366 NETGRAPH7_PRED1 opt_netgraph.h 367 NETGRAPH7_RFC1490 opt_netgraph.h 368 NETGRAPH7_SOCKET opt_netgraph.h 369 NETGRAPH7_SPLIT opt_netgraph.h 370 NETGRAPH7_SPPP opt_netgraph.h 371 NETGRAPH7_TAG opt_netgraph.h 372 NETGRAPH7_TCPMSS opt_netgraph.h 373 NETGRAPH7_TEE opt_netgraph.h 374 NETGRAPH7_TTY opt_netgraph.h 375 NETGRAPH7_UI opt_netgraph.h 376 NETGRAPH7_VJC opt_netgraph.h 377 378 # NgATM options 379 NGATM7_ATM opt_netgraph.h 380 NGATM7_ATMBASE opt_netgraph.h 381 NGATM7_SSCOP opt_netgraph.h 382 NGATM7_SSCFU opt_netgraph.h 383 NGATM7_UNI opt_netgraph.h 384 NGATM7_CCATM opt_netgraph.h 385 386 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 387 # Each netgraph node type can be either be compiled into the kernel 388 # or loaded dynamically. To get the former, include the corresponding 389 # option below. Each type has its own man page, e.g. ng_async(8). 390 NETGRAPH 391 NETGRAPH_ASYNC opt_netgraph.h 392 NETGRAPH_BPF opt_netgraph.h 393 NETGRAPH_BRIDGE opt_netgraph.h 394 NETGRAPH_CISCO opt_netgraph.h 395 NETGRAPH_ECHO opt_netgraph.h 396 NETGRAPH_EIFACE opt_netgraph.h 397 NETGRAPH_ETHER opt_netgraph.h 398 NETGRAPH_FEC opt_netgraph.h 399 NETGRAPH_FRAME_RELAY opt_netgraph.h 400 NETGRAPH_HOLE opt_netgraph.h 401 NETGRAPH_IFACE opt_netgraph.h 402 NETGRAPH_KSOCKET opt_netgraph.h 403 NETGRAPH_LMI opt_netgraph.h 404 NETGRAPH_L2TP opt_netgraph.h 405 # MPPC compression requires proprietary files (not included) 406 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 407 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 408 NETGRAPH_ONE2MANY opt_netgraph.h 409 NETGRAPH_PPP opt_netgraph.h 410 NETGRAPH_PPPOE opt_netgraph.h 411 NETGRAPH_PPTPGRE opt_netgraph.h 412 NETGRAPH_RFC1490 opt_netgraph.h 413 NETGRAPH_SOCKET opt_netgraph.h 414 NETGRAPH_TEE opt_netgraph.h 415 NETGRAPH_TTY opt_netgraph.h 416 NETGRAPH_UI opt_netgraph.h 417 NETGRAPH_VJC opt_netgraph.h 418 419 # AGP options 420 AGP_DEBUG opt_agp.h 421 422 # DRM options 423 DRM_DEBUG opt_drm.h 424 DRM_LINUX opt_drm.h 425 426 # ATM (HARP version) 427 ATM_CORE opt_atm.h 428 ATM_IP opt_atm.h 429 ATM_SIGPVC opt_atm.h 430 ATM_SPANS opt_atm.h 431 ATM_UNI opt_atm.h 432 433 # XXX Conflict: # of devices vs network protocol (Native ATM). 434 # This makes "atm.h" unusable. 435 NATM opt_natm.h 436 437 # DPT driver debug flags 438 DPT_MEASURE_PERFORMANCE opt_dpt.h 439 DPT_HANDLE_TIMEOUTS opt_dpt.h 440 DPT_TIMEOUT_FACTOR opt_dpt.h 441 DPT_LOST_IRQ opt_dpt.h 442 DPT_RESET_HBA opt_dpt.h 443 444 # Misc debug flags. Most of these should probably be replaced with 445 # 'DEBUG', and then let people recompile just the interesting modules 446 # with 'make CC="cc -DDEBUG"'. 447 CLUSTERDEBUG opt_debug_cluster.h 448 DEBUG_1284 opt_ppb_1284.h 449 VP0_DEBUG opt_vpo.h 450 LPT_DEBUG opt_lpt.h 451 PLIP_DEBUG opt_plip.h 452 LOCKF_DEBUG opt_debug_lockf.h 453 SI_DEBUG opt_debug_si.h 454 455 # Fb options 456 FB_DEBUG opt_fb.h 457 FB_INSTALL_CDEV opt_fb.h 458 459 # ppbus related options 460 PERIPH_1284 opt_ppb_1284.h 461 DONTPROBE_1284 opt_ppb_1284.h 462 463 # smbus related options 464 ENABLE_ALART opt_intpm.h 465 466 # These cause changes all over the kernel 467 NO_LWKT_SPLIT_USERPRI opt_global.h 468 BLKDEV_IOSIZE opt_global.h 469 DEBUG opt_global.h 470 DEBUG_LOCKS opt_global.h 471 DEBUG_LOCKS_LATENCY opt_global.h 472 DEBUG_CRIT_SECTIONS opt_global.h 473 DIAGNOSTIC opt_global.h 474 INVARIANTS opt_global.h 475 VFS_BIO_DEBUG opt_global.h 476 DEBUG_INTERRUPTS opt_global.h 477 SOCKBUF_DEBUG opt_global.h 478 PANIC_DEBUG opt_global.h 479 MBUF_DEBUG opt_global.h 480 PMAP_DEBUG opt_global.h 481 VM_PAGE_DEBUG opt_global.h 482 SLAB_DEBUG opt_global.h 483 484 # Sample system/interrupt PC 485 DEBUG_PCTRACK opt_pctrack.h 486 487 # These are VM related options 488 NO_SWAPPING opt_vm.h 489 490 # sys/netkey 491 KEY 492 493 # Size of the kernel message buffer 494 MSGBUF_SIZE opt_msgbuf.h 495 496 # PCI related options 497 COMPAT_OLDPCI 498 499 # NFS options 500 NFS_MINATTRTIMO opt_nfs.h 501 NFS_MAXATTRTIMO opt_nfs.h 502 NFS_MINDIRATTRTIMO opt_nfs.h 503 NFS_MAXDIRATTRTIMO opt_nfs.h 504 NFS_GATHERDELAY opt_nfs.h 505 NFS_UIDHASHSIZ opt_nfs.h 506 NFS_WDELAYHASHSIZ opt_nfs.h 507 NFS_MUIDHASHSIZ opt_nfs.h 508 NFS_NOSERVER opt_nfs.h 509 NFS_DEBUG opt_nfs.h 510 511 # MSDOSFS options 512 MSDOSFS_DEBUG opt_msdosfs.h 513 514 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 515 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 516 BROOKTREE_ALLOC_PAGES opt_bktr.h 517 BKTR_OVERRIDE_CARD opt_bktr.h 518 BKTR_OVERRIDE_TUNER opt_bktr.h 519 BKTR_OVERRIDE_DBX opt_bktr.h 520 BKTR_OVERRIDE_MSP opt_bktr.h 521 BKTR_SYSTEM_DEFAULT opt_bktr.h 522 BKTR_ALLOC_PAGES opt_bktr.h 523 BKTR_USE_PLL opt_bktr.h 524 BKTR_GPIO_ACCESS opt_bktr.h 525 BKTR_NO_MSP_RESET opt_bktr.h 526 BKTR_430_FX_MODE opt_bktr.h 527 BKTR_SIS_VIA_MODE opt_bktr.h 528 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 529 530 # Various mi ISA bus flags 531 COM_ESP opt_sio.h 532 COM_MULTIPORT opt_sio.h 533 BREAK_TO_DEBUGGER opt_comconsole.h 534 ALT_BREAK_TO_DEBUGGER opt_comconsole.h 535 536 # options for bus/device framework 537 BUS_DEBUG opt_bus.h 538 539 # options for USB support 540 OHCI_DEBUG opt_usb.h 541 USB_DEBUG opt_usb.h 542 543 # Vinum options 544 VINUMDEBUG opt_vinum.h 545 546 # Embedded system options 547 UKBD_DFLT_KEYMAP opt_ukbd.h 548 INIT_PATH opt_init_path.h 549 550 ROOTDEVNAME opt_rootdevname.h 551 552 FDC_DEBUG opt_fdc.h 553 PCFCLOCK_VERBOSE opt_pcfclock.h 554 PCFCLOCK_MAX_RETRIES opt_pcfclock.h 555 556 # Network device queue based polling 557 IFPOLL_ENABLE opt_ifpoll.h 558 559 # options for ubsec driver 560 UBSEC_DEBUG opt_ubsec.h 561 UBSEC_RNDTEST opt_ubsec.h 562 UBSEC_NO_RNG opt_ubsec.h 563 564 # options for hifn driver 565 HIFN_DEBUG opt_hifn.h 566 HIFN_RNDTEST opt_hifn.h 567 HIFN_NO_RNG opt_hifn.h 568 569 # options for safenet driver 570 SAFE_DEBUG opt_safe.h 571 SAFE_NO_RNG opt_safe.h 572 SAFE_RNDTEST opt_safe.h 573 574 # KTR options 575 KTR opt_global.h 576 KTR_ENTRIES opt_global.h 577 KTR_ALL opt_ktr.h 578 KTR_CTXSW opt_ktr.h 579 KTR_DMCRYPT opt_ktr.h 580 KTR_DSCHED_BFQ opt_ktr.h 581 KTR_ETHERNET opt_ktr.h 582 KTR_HAMMER opt_ktr.h 583 KTR_IFQ opt_ktr.h 584 KTR_IF_BGE opt_ktr.h 585 KTR_IF_EM opt_ktr.h 586 KTR_IF_EMX opt_ktr.h 587 KTR_IF_START opt_ktr.h 588 KTR_IPIQ opt_ktr.h 589 KTR_KERNENTRY opt_ktr.h 590 KTR_MEMORY opt_ktr.h 591 KTR_SERIALIZER opt_ktr.h 592 KTR_SPIN_CONTENTION opt_ktr.h 593 KTR_TESTLOG opt_ktr.h 594 KTR_TOKENS opt_ktr.h 595 KTR_TSLEEP opt_ktr.h 596 KTR_USB_MEMORY opt_ktr.h 597 KTR_USCHED_BSD4 opt_ktr.h 598 KTR_USCHED_DFLY opt_ktr.h 599 KTR_VERBOSE opt_ktr.h 600 KTR_IF_POLL opt_ktr.h 601 602 # NTFS options 603 NTFS_DEBUG opt_ntfs.h 604 605 # options for the Atheros driver 606 ATH_DEBUG opt_ath.h 607 ATH_DIAGAPI opt_ath.h 608 ATH_RXBUF opt_ath.h 609 ATH_TXBUF opt_ath.h 610 611 # ...and its HAL 612 AH_SUPPORT_AR5416 opt_ah.h 613 614 # bce driver 615 BCE_RSS_DEBUG opt_bce.h 616 BCE_TSS_DEBUG opt_bce.h 617 618 # bnx driver 619 BNX_RSS_DEBUG opt_bnx.h 620 BNX_TSO_DEBUG opt_bnx.h 621 BNX_TSS_DEBUG opt_bnx.h 622 623 # ed driver 624 ED_NO_MIIBUS opt_ed.h 625 626 # emx driver 627 EMX_RSS_DEBUG opt_emx.h 628 EMX_TSO_DEBUG opt_emx.h 629 EMX_TSS_DEBUG opt_emx.h 630 631 # jme driver 632 JME_RSS_DEBUG opt_jme.h 633 634 # igb driver 635 IGB_RSS_DEBUG opt_igb.h 636 IGB_TSS_DEBUG opt_igb.h 637 IGB_MSIX_DEBUG opt_igb.h 638 639 # Options for the Intel 802.11n wireless driver 640 IWN_DEBUG opt_iwn.h 641 642 # dcons options 643 DCONS_BUF_SIZE opt_dcons.h 644 DCONS_POLL_HZ opt_dcons.h 645 DCONS_FORCE_CONSOLE opt_dcons.h 646 DCONS_FORCE_GDB opt_dcons.h 647 648 # deprecated drivers and options 649 I_WANT_DEPRECATED_STUFF opt_deprecated.h 650 651 # SCTP 652 SCTP opt_sctp.h 653 SCTP_DEBUG opt_sctp.h 654 SCTP_USE_ADLER32 opt_sctp.h 655 SCTP_HIGH_SPEED opt_sctp.h 656 SCTP_STAT_LOGGING opt_sctp.h 657 SCTP_CWND_LOGGING opt_sctp.h 658 SCTP_BLK_LOGGING opt_sctp.h 659 SCTP_STR_LOGGING opt_sctp.h 660 SCTP_FR_LOGGING opt_sctp.h 661 SCTP_MAP_LOGGING opt_sctp.h 662 663 # DSCHED stuff 664 DSCHED_AS opt_dsched.h 665 DSCHED_BFQ opt_dsched.h 666 DSCHED_FQ opt_dsched.h 667 668 # Receive Side Scaling (now basecode) 669 RSS_DEBUG opt_rss.h 670 671 # Panic settings 672 WDOG_DISABLE_ON_PANIC opt_panic.h 673 ERROR_LED_ON_PANIC opt_panic.h 674 675 # 802.11 support layer 676 IEEE80211_DEBUG opt_wlan.h 677 IEEE80211_DEBUG_REFCNT opt_wlan.h 678 IEEE80211_AMPDU_AGE opt_wlan.h 679 IEEE80211_SUPPORT_MESH opt_wlan.h 680 IEEE80211_SUPPORT_SUPERG opt_wlan.h 681 IEEE80211_SUPPORT_TDMA opt_wlan.h 682 683 # 802.11 TDMA support 684 TDMA_SLOTLEN_DEFAULT opt_tdma.h 685 TDMA_SLOTCNT_DEFAULT opt_tdma.h 686 TDMA_BINTVAL_DEFAULT opt_tdma.h 687 TDMA_TXRATE_11B_DEFAULT opt_tdma.h 688 TDMA_TXRATE_11G_DEFAULT opt_tdma.h 689 TDMA_TXRATE_11A_DEFAULT opt_tdma.h 690 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 691 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 692 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 693 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 694 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 695 696 PANIC_REBOOT_WAIT_TIME opt_panic.h 697 698 # Obsolete options (will be removed in the future) 699 # 700 DEVICE_POLLING opt_dontuse.h 701 SMP opt_dontuse.h
Cache object: 2467aa78da14dfda6939b705d584a0ec
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]