FreeBSD/Linux Kernel Cross Reference
sys/conf/options
1 # $FreeBSD: releng/5.3/sys/conf/options 136588 2004-10-16 08:43:07Z cvs2svn $
2 #
3 # On the handling of kernel options
4 #
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affect only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 AAC_DEBUG opt_aac.h
34 AHC_ALLOW_MEMIO opt_aic7xxx.h
35 AHC_TMODE_ENABLE opt_aic7xxx.h
36 AHC_DUMP_EEPROM opt_aic7xxx.h
37 AHC_DEBUG opt_aic7xxx.h
38 AHC_DEBUG_OPTS opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40 AHD_DEBUG opt_aic79xx.h
41 AHD_DEBUG_OPTS opt_aic79xx.h
42 AHD_TMODE_ENABLE opt_aic79xx.h
43 AHD_REG_PRETTY_PRINT opt_aic79xx.h
44 ADW_ALLOW_MEMIO opt_adw.h
45
46 TWA_DEBUG opt_twa.h
47 TWA_FLASH_FIRMWARE opt_twa.h
48
49 # Debugging options.
50 DDB
51 DDB_NUMSYM opt_ddb.h
52 GDB
53 GDBSPEED opt_gdb.h
54 KDB opt_global.h
55 KDB_TRACE opt_kdb.h
56 KDB_UNATTENDED opt_kdb.h
57
58 # Miscellaneous options.
59 ADAPTIVE_GIANT opt_adaptive_mutexes.h
60 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
61 ALQ
62 CODA_COMPAT_5 opt_coda.h
63 COMPAT_43 opt_compat.h
64 COMPAT_FREEBSD4 opt_compat.h
65 COMPILING_LINT opt_global.h
66 CONSPEED opt_comconsole.h
67 CY_PCI_FASTINTR
68 DIRECTIO opt_directio.h
69 FULL_PREEMPTION opt_sched.h
70 PREEMPTION opt_sched.h
71 GEOM_AES opt_geom.h
72 GEOM_APPLE opt_geom.h
73 GEOM_BDE opt_geom.h
74 GEOM_BSD opt_geom.h
75 GEOM_CONCAT opt_geom.h
76 GEOM_FOX opt_geom.h
77 GEOM_GATE opt_geom.h
78 GEOM_GPT opt_geom.h
79 GEOM_LABEL opt_geom.h
80 GEOM_MBR opt_geom.h
81 GEOM_MIRROR opt_geom.h
82 GEOM_NOP opt_geom.h
83 GEOM_PC98 opt_geom.h
84 GEOM_RAID3 opt_geom.h
85 GEOM_STRIPE opt_geom.h
86 GEOM_SUNLABEL opt_geom.h
87 GEOM_UZIP opt_geom.h
88 GEOM_VOL opt_geom.h
89 HW_WDOG
90 KSTACK_MAX_PAGES
91 KSTACK_PAGES
92 KTRACE
93 KTRACE_REQUEST_POOL opt_ktrace.h
94 LIBICONV
95 MAC
96 MAC_ALWAYS_LABEL_MBUF opt_mac.h
97 MAC_BIBA opt_dontuse.h
98 MAC_BSDEXTENDED opt_dontuse.h
99 MAC_DEBUG opt_mac.h
100 MAC_IFOFF opt_dontuse.h
101 MAC_LOMAC opt_dontuse.h
102 MAC_MLS opt_dontuse.h
103 MAC_NONE opt_dontuse.h
104 MAC_PARTITION opt_dontuse.h
105 MAC_PORTACL opt_dontuse.h
106 MAC_SEEOTHERUIDS opt_dontuse.h
107 MAC_STATIC opt_mac.h
108 MAC_STUB opt_dontuse.h
109 MAC_TEST opt_dontuse.h
110 MD_ROOT opt_md.h
111 MD_ROOT_SIZE opt_md.h
112 MPROF_BUFFERS opt_mprof.h
113 MPROF_HASH_SIZE opt_mprof.h
114 MUTEX_WAKE_ALL
115 NSWBUF_MIN opt_swap.h
116 PANIC_REBOOT_WAIT_TIME opt_panic.h
117 PPS_SYNC opt_ntp.h
118 PUC_FASTINTR opt_puc.h
119 QUOTA
120 SCHED_4BSD opt_sched.h
121 SCHED_ULE opt_sched.h
122 SHOW_BUSYBUFS
123 SLEEPQUEUE_PROFILING
124 SPX_HACK
125 SUIDDIR opt_suiddir.h
126 MSGMNB opt_sysvipc.h
127 MSGMNI opt_sysvipc.h
128 MSGSEG opt_sysvipc.h
129 MSGSSZ opt_sysvipc.h
130 MSGTQL opt_sysvipc.h
131 SEMMAP opt_sysvipc.h
132 SEMMNI opt_sysvipc.h
133 SEMMNS opt_sysvipc.h
134 SEMMNU opt_sysvipc.h
135 SEMMSL opt_sysvipc.h
136 SEMOPM opt_sysvipc.h
137 SEMUME opt_sysvipc.h
138 SHMALL opt_sysvipc.h
139 SHMMAX opt_sysvipc.h
140 SHMMAXPGS opt_sysvipc.h
141 SHMMIN opt_sysvipc.h
142 SHMMNI opt_sysvipc.h
143 SHMSEG opt_sysvipc.h
144 SYSVMSG opt_sysvipc.h
145 SYSVSEM opt_sysvipc.h
146 SYSVSHM opt_sysvipc.h
147 SW_WATCHDOG opt_watchdog.h
148 TURNSTILE_PROFILING
149 TTYHOG opt_tty.h
150 VFS_AIO
151 WLCACHE opt_wavelan.h
152 WLDEBUG opt_wavelan.h
153
154 # POSIX kernel options
155 P1003_1B_SEMAPHORES opt_posix.h
156 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
157
158 # Do we want the config file compiled into the kernel?
159 INCLUDE_CONFIG_FILE opt_config.h
160
161 # Options for static filesystems. These should only be used at config
162 # time, since the corresponding lkms cannot work if there are any static
163 # dependencies. Unusability is enforced by hiding the defines for the
164 # options in a never-included header.
165 CD9660 opt_dontuse.h
166 CODA opt_dontuse.h
167 EXT2FS opt_dontuse.h
168 FDESCFS opt_dontuse.h
169 HPFS opt_dontuse.h
170 LINPROCFS opt_dontuse.h
171 MSDOSFS opt_dontuse.h
172 NTFS opt_dontuse.h
173 NULLFS opt_dontuse.h
174 NWFS opt_dontuse.h
175 PORTALFS opt_dontuse.h
176 PROCFS opt_dontuse.h
177 PSEUDOFS opt_dontuse.h
178 SMBFS opt_dontuse.h
179 UDF opt_dontuse.h
180 UMAPFS opt_dontuse.h
181 UNIONFS opt_dontuse.h
182
183 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
184 FFS opt_ffs_broken_fixme.h
185
186 # These static filesystems have one slightly bogus static dependency in
187 # sys/i386/i386/autoconf.c. If any of these filesystems are
188 # statically compiled into the kernel, code for mounting them as root
189 # filesystems will be enabled - but look below.
190 NFSCLIENT opt_nfs.h
191 NFSSERVER opt_nfs.h
192
193 # filesystems and libiconv bridge
194 CD9660_ICONV opt_dontuse.h
195 MSDOSFS_ICONV opt_dontuse.h
196 NTFS_ICONV opt_dontuse.h
197 UDF_ICONV opt_dontuse.h
198
199 # If you are following the conditions in the copyright,
200 # you can enable soft-updates which will speed up a lot of thigs
201 # and make the system safer from crashes at the same time.
202 # otherwise a STUB module will be compiled in.
203 SOFTUPDATES opt_ffs.h
204
205 # Enabling this option turns on support for Access Control Lists in UFS,
206 # which can be used to support high security configurations. Depends on
207 # UFS_EXTATTR.
208 UFS_ACL opt_ufs.h
209
210 # Enabling this option turns on support for extended attributes in UFS-based
211 # filesystems, which can be used to support high security configurations
212 # as well as new filesystem features.
213 UFS_EXTATTR opt_ufs.h
214 UFS_EXTATTR_AUTOSTART opt_ufs.h
215
216 # Enable fast hash lookups for large directories on UFS-based filesystems.
217 UFS_DIRHASH opt_ufs.h
218
219 # The below sentence is not in English, and neither is this one.
220 # We plan to remove the static dependences above, with a
221 # <filesystem>_ROOT option to control if it usable as root. This list
222 # allows these options to be present in config files already (though
223 # they won't make any difference yet).
224 NFS_ROOT opt_nfsroot.h
225
226 # SMB/CIFS requester
227 NETSMB opt_netsmb.h
228 NETSMBCRYPTO opt_netsmb.h
229
230 # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
231 MSDOSFS_LARGE opt_msdosfs.h
232
233 # Options used only in subr_param.c.
234 HZ opt_param.h
235 MAXFILES opt_param.h
236 NBUF opt_param.h
237 NMBCLUSTERS opt_param.h
238 NSFBUFS opt_param.h
239 VM_BCACHE_SIZE_MAX opt_param.h
240 VM_SWZONE_SIZE_MAX opt_param.h
241 MAXUSERS
242 DFLDSIZ opt_param.h
243 MAXDSIZ opt_param.h
244 MAXSSIZ opt_param.h
245
246 # Generic SCSI options.
247 CAM_MAX_HIGHPOWER opt_cam.h
248 CAMDEBUG opt_cam.h
249 CAM_DEBUG_DELAY opt_cam.h
250 CAM_DEBUG_BUS opt_cam.h
251 CAM_DEBUG_TARGET opt_cam.h
252 CAM_DEBUG_LUN opt_cam.h
253 CAM_DEBUG_FLAGS opt_cam.h
254 CAM_NEW_TRAN_CODE opt_cam.h
255 SCSI_DELAY opt_scsi.h
256 SCSI_NO_SENSE_STRINGS opt_scsi.h
257 SCSI_NO_OP_STRINGS opt_scsi.h
258
259 # Options used only in cam/scsi/scsi_cd.c
260 CHANGER_MIN_BUSY_SECONDS opt_cd.h
261 CHANGER_MAX_BUSY_SECONDS opt_cd.h
262
263 # Options used only in cam/scsi/scsi_sa.c.
264 SA_IO_TIMEOUT opt_sa.h
265 SA_SPACE_TIMEOUT opt_sa.h
266 SA_REWIND_TIMEOUT opt_sa.h
267 SA_ERASE_TIMEOUT opt_sa.h
268 SA_1FM_AT_EOD opt_sa.h
269
270 # Options used only in cam/scsi/scsi_pt.c
271 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
272
273 # Options used only in cam/scsi/scsi_ses.c
274 SES_ENABLE_PASSTHROUGH opt_ses.h
275
276 # Options used in dev/sym/ (Symbios SCSI driver).
277 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
278 # Allows the ncr to take precedence
279 # 1 (1<<0) -> 810a, 860
280 # 2 (1<<1) -> 825a, 875, 885, 895
281 # 4 (1<<2) -> 895a, 896, 1510d
282 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
283 # disabled:0 (default), enabled:1
284 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
285 # disabled:0, enabled:1 (default)
286 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
287 # default:8, range:[1..64]
288
289 # Options used only in pci/ncr.c
290 SCSI_NCR_DEBUG opt_ncr.h
291 SCSI_NCR_MAX_SYNC opt_ncr.h
292 SCSI_NCR_MAX_WIDE opt_ncr.h
293 SCSI_NCR_MYADDR opt_ncr.h
294
295 # Options used only in dev/isp/*
296 ISP_TARGET_MODE opt_isp.h
297 ISP_FW_CRASH_DUMP opt_isp.h
298
299 # Options used in the 'ata' ATA/ATAPI driver
300 ATA_STATIC_ID opt_ata.h
301 ATA_NOPCI opt_ata.h
302 DEV_ATADISK opt_ata.h
303 DEV_ATAPICD opt_ata.h
304 DEV_ATAPIST opt_ata.h
305 DEV_ATAPIFD opt_ata.h
306 DEV_ATAPICAM opt_ata.h
307 DEV_ATARAID opt_ata.h
308
309 # Net stuff.
310 ACCEPT_FILTER_DATA
311 ACCEPT_FILTER_HTTP
312 ALTQ opt_global.h
313 ALTQ_CBQ opt_altq.h
314 ALTQ_RED opt_altq.h
315 ALTQ_RIO opt_altq.h
316 ALTQ_HFSC opt_altq.h
317 ALTQ_CDNR opt_altq.h
318 ALTQ_PRIQ opt_altq.h
319 ALTQ_NOPCC opt_altq.h
320 ALTQ_DEBUG opt_altq.h
321 BOOTP opt_bootp.h
322 BOOTP_COMPAT opt_bootp.h
323 BOOTP_NFSROOT opt_bootp.h
324 BOOTP_NFSV3 opt_bootp.h
325 BOOTP_WIRED_TO opt_bootp.h
326 BRIDGE opt_bdg.h
327 DEV_PF opt_pf.h
328 DEV_PFLOG opt_pf.h
329 DEV_PFSYNC opt_pf.h
330 ETHER_II opt_ef.h
331 ETHER_8023 opt_ef.h
332 ETHER_8022 opt_ef.h
333 ETHER_SNAP opt_ef.h
334 MROUTING opt_mrouting.h
335 PIM opt_mrouting.h
336 INET opt_inet.h
337 INET6 opt_inet6.h
338 IPSEC opt_ipsec.h
339 IPSEC_ESP opt_ipsec.h
340 IPSEC_DEBUG opt_ipsec.h
341 IPSEC_FILTERGIF opt_ipsec.h
342 FAST_IPSEC opt_ipsec.h
343 IPDIVERT
344 DUMMYNET opt_ipdn.h
345 IPFILTER opt_ipfilter.h
346 IPFILTER_LOG opt_ipfilter.h
347 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
348 IPFIREWALL opt_ipfw.h
349 IPFIREWALL_VERBOSE opt_ipfw.h
350 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
351 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
352 IPFIREWALL_FORWARD opt_ipfw.h
353 IPV6FIREWALL opt_ip6fw.h
354 IPV6FIREWALL_VERBOSE opt_ip6fw.h
355 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
356 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
357 IPSTEALTH
358 IPX
359 IPXIP opt_ipx.h
360 LIBMBPOOL
361 LIBMCHAIN
362 MBUF_STRESS_TEST opt_mbuf_stress_test.h
363 NCP
364 NETATALK opt_atalk.h
365 NET_WITH_GIANT opt_net.h
366 PPP_BSDCOMP opt_ppp.h
367 PPP_DEFLATE opt_ppp.h
368 PPP_FILTER opt_ppp.h
369 SLIP_IFF_OPTS opt_slip.h
370 TCPDEBUG
371 TCP_SIGNATURE opt_inet.h
372 TCP_SACK_DEBUG opt_tcp_sack.h
373 TCP_DROP_SYNFIN opt_tcp_input.h
374 XBONEHACK
375
376 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
377 # Each netgraph node type can be either be compiled into the kernel
378 # or loaded dynamically. To get the former, include the corresponding
379 # option below. Each type has its own man page, e.g. ng_async(4).
380 NETGRAPH
381 NETGRAPH_ASYNC opt_netgraph.h
382 NETGRAPH_ATMLLC opt_netgraph.h
383 NETGRAPH_ATM_ATMPIF opt_netgraph.h
384 NETGRAPH_BLUETOOTH opt_netgraph.h
385 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
386 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
387 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
388 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
389 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
390 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
391 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
392 NETGRAPH_BPF opt_netgraph.h
393 NETGRAPH_BRIDGE opt_netgraph.h
394 NETGRAPH_CISCO opt_netgraph.h
395 NETGRAPH_DEVICE opt_netgraph.h
396 NETGRAPH_ECHO opt_netgraph.h
397 NETGRAPH_EIFACE opt_netgraph.h
398 NETGRAPH_ETHER opt_netgraph.h
399 NETGRAPH_FEC opt_netgraph.h
400 NETGRAPH_FRAME_RELAY opt_netgraph.h
401 NETGRAPH_GIF opt_netgraph.h
402 NETGRAPH_GIF_DEMUX opt_netgraph.h
403 NETGRAPH_HOLE opt_netgraph.h
404 NETGRAPH_IFACE opt_netgraph.h
405 NETGRAPH_IP_INPUT opt_netgraph.h
406 NETGRAPH_KSOCKET opt_netgraph.h
407 NETGRAPH_L2TP opt_netgraph.h
408 NETGRAPH_LMI opt_netgraph.h
409 # MPPC compression requires proprietary files (not included)
410 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
411 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
412 NETGRAPH_ONE2MANY opt_netgraph.h
413 NETGRAPH_PPP opt_netgraph.h
414 NETGRAPH_PPPOE opt_netgraph.h
415 NETGRAPH_PPTPGRE opt_netgraph.h
416 NETGRAPH_RFC1490 opt_netgraph.h
417 NETGRAPH_SOCKET opt_netgraph.h
418 NETGRAPH_SPLIT opt_netgraph.h
419 NETGRAPH_SPPP opt_netgraph.h
420 NETGRAPH_TEE opt_netgraph.h
421 NETGRAPH_TTY opt_netgraph.h
422 NETGRAPH_UI opt_netgraph.h
423 NETGRAPH_VJC opt_netgraph.h
424
425 # NgATM options
426 NGATM_ATM opt_netgraph.h
427 NGATM_ATMBASE opt_netgraph.h
428 NGATM_SSCOP opt_netgraph.h
429 NGATM_SSCFU opt_netgraph.h
430 NGATM_UNI opt_netgraph.h
431 NGATM_CCATM opt_netgraph.h
432
433 # DRM options
434 DRM_DEBUG opt_drm.h
435
436 ZERO_COPY_SOCKETS opt_zero.h
437 TI_PRIVATE_JUMBOS opt_ti.h
438 TI_JUMBO_HDRSPLIT opt_ti.h
439
440 # ATM (HARP version)
441 ATM_CORE opt_atm.h
442 ATM_IP opt_atm.h
443 ATM_SIGPVC opt_atm.h
444 ATM_SPANS opt_atm.h
445 ATM_UNI opt_atm.h
446
447 # XXX Conflict: # of devices vs network protocol (Native ATM).
448 # This makes "atm.h" unusable.
449 NATM
450
451 # DPT driver debug flags
452 DPT_MEASURE_PERFORMANCE opt_dpt.h
453 DPT_HANDLE_TIMEOUTS opt_dpt.h
454 DPT_TIMEOUT_FACTOR opt_dpt.h
455 DPT_LOST_IRQ opt_dpt.h
456 DPT_RESET_HBA opt_dpt.h
457
458 # Misc debug flags. Most of these should probably be replaced with
459 # 'DEBUG', and then let people recompile just the interesting modules
460 # with 'make CC="cc -DDEBUG"'.
461 CLUSTERDEBUG opt_debug_cluster.h
462 DEBUG_1284 opt_ppb_1284.h
463 VP0_DEBUG opt_vpo.h
464 LPT_DEBUG opt_lpt.h
465 PLIP_DEBUG opt_plip.h
466 LOCKF_DEBUG opt_debug_lockf.h
467 NPX_DEBUG opt_debug_npx.h
468 NETATALKDEBUG opt_atalk.h
469 SI_DEBUG opt_debug_si.h
470 SX_DEBUG opt_debug_sx.h
471
472 # Fb options
473 FB_DEBUG opt_fb.h
474 FB_INSTALL_CDEV opt_fb.h
475
476 # ppbus related options
477 PERIPH_1284 opt_ppb_1284.h
478 DONTPROBE_1284 opt_ppb_1284.h
479
480 # smbus related options
481 ENABLE_ALART opt_intpm.h
482
483 # These cause changes all over the kernel
484 BLKDEV_IOSIZE opt_global.h
485 BURN_BRIDGES opt_global.h
486 DEBUG opt_global.h
487 DEBUG_LOCKS opt_global.h
488 DEBUG_VFS_LOCKS opt_global.h
489 DIAGNOSTIC opt_global.h
490 INVARIANT_SUPPORT opt_global.h
491 INVARIANTS opt_global.h
492 LOOKUP_SHARED opt_global.h
493 MCLSHIFT opt_global.h
494 MUTEX_DEBUG opt_global.h
495 MUTEX_NOINLINE opt_global.h
496 MUTEX_PROFILING opt_global.h
497 MSIZE opt_global.h
498 REGRESSION opt_global.h
499 RESTARTABLE_PANICS opt_global.h
500 VFS_BIO_DEBUG opt_global.h
501
502 # These are VM related options
503 VM_KMEM_SIZE opt_vm.h
504 VM_KMEM_SIZE_SCALE opt_vm.h
505 VM_KMEM_SIZE_MAX opt_vm.h
506 NO_SWAPPING opt_vm.h
507 MALLOC_MAKE_FAILURES opt_vm.h
508 MALLOC_PROFILE opt_vm.h
509 PQ_NOOPT opt_vmpage.h
510 PQ_NORMALCACHE opt_vmpage.h
511 PQ_MEDIUMCACHE opt_vmpage.h
512 PQ_LARGECACHE opt_vmpage.h
513 PQ_HUGECACHE opt_vmpage.h
514 PQ_CACHESIZE opt_vmpage.h
515
516 # Standard SMP options
517 SMP opt_global.h
518
519 # Size of the kernel message buffer
520 MSGBUF_SIZE opt_msgbuf.h
521
522 # NFS options
523 NFS_MINATTRTIMO opt_nfs.h
524 NFS_MAXATTRTIMO opt_nfs.h
525 NFS_MINDIRATTRTIMO opt_nfs.h
526 NFS_MAXDIRATTRTIMO opt_nfs.h
527 NFS_GATHERDELAY opt_nfs.h
528 NFS_WDELAYHASHSIZ opt_nfs.h
529 NFS_DEBUG opt_nfs.h
530
531 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
532 OVERRIDE_CARD opt_bktr.h
533 OVERRIDE_TUNER opt_bktr.h
534 OVERRIDE_DBX opt_bktr.h
535 OVERRIDE_MSP opt_bktr.h
536 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
537 BROOKTREE_ALLOC_PAGES opt_bktr.h
538 BKTR_OVERRIDE_CARD opt_bktr.h
539 BKTR_OVERRIDE_TUNER opt_bktr.h
540 BKTR_OVERRIDE_DBX opt_bktr.h
541 BKTR_OVERRIDE_MSP opt_bktr.h
542 BKTR_SYSTEM_DEFAULT opt_bktr.h
543 BKTR_ALLOC_PAGES opt_bktr.h
544 BKTR_USE_PLL opt_bktr.h
545 BKTR_GPIO_ACCESS opt_bktr.h
546 BKTR_NO_MSP_RESET opt_bktr.h
547 BKTR_430_FX_MODE opt_bktr.h
548 BKTR_SIS_VIA_MODE opt_bktr.h
549 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
550 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
551
552 # options for serial support
553 COM_ESP opt_sio.h
554 COM_MULTIPORT opt_sio.h
555 BREAK_TO_DEBUGGER opt_comconsole.h
556 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
557
558 # Options to support PPS
559 UART_PPS_ON_CTS opt_uart.h
560
561 # options for bus/device framework
562 BUS_DEBUG opt_bus.h
563
564 # options for USB support
565 USB_DEBUG opt_usb.h
566 USBVERBOSE opt_usb.h
567 UKBD_DFLT_KEYMAP opt_ukbd.h
568 UPLCOM_INTR_INTERVAL opt_uplcom.h
569 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
570 UVSCOM_INTR_INTERVAL opt_uvscom.h
571
572 # Vinum options
573 VINUMDEBUG opt_vinum.h
574
575 # Embedded system options
576 INIT_PATH opt_init_path.h
577
578 ROOTDEVNAME opt_rootdevname.h
579
580 FDC_DEBUG opt_fdc.h
581 PCFCLOCK_VERBOSE opt_pcfclock.h
582 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
583 TDFX_LINUX opt_tdfx.h
584
585 KTR opt_global.h
586 KTR_ALQ opt_ktr.h
587 KTR_MASK opt_ktr.h
588 KTR_CPUMASK opt_ktr.h
589 KTR_COMPILE opt_global.h
590 KTR_ENTRIES opt_global.h
591 KTR_VERBOSE opt_ktr.h
592 WITNESS opt_global.h
593 WITNESS_KDB opt_witness.h
594 WITNESS_SKIPSPIN opt_witness.h
595
596 # options for ACPI support
597 ACPI_DEBUG opt_acpi.h
598 ACPI_MAX_THREADS opt_acpi.h
599 ACPI_NO_SEMAPHORES opt_acpi.h
600 ACPICA_PEDANTIC opt_acpi.h
601
602 # options for DEVFS, see sys/fs/devfs/devfs.h
603 NDEVFSINO opt_devfs.h
604 NDEVFSOVERFLOW opt_devfs.h
605
606 # various 'device presence' options.
607 DEV_BPF opt_bpf.h
608 DEV_ISA opt_isa.h
609 DEV_MCA opt_mca.h
610 DEV_SPLASH opt_splash.h
611
612 EISA_SLOTS opt_eisa.h
613
614 # ed driver
615 ED_NO_MIIBUS opt_ed.h
616
617 # wi driver
618 WI_SYMBOL_FIRMWARE opt_wi.h
619
620 # XXX bogusly global.
621 DEVICE_POLLING opt_global.h
622
623 SOCKBUF_DEBUG opt_global.h
624
625 # options for ubsec driver
626 UBSEC_DEBUG opt_ubsec.h
627 UBSEC_RNDTEST opt_ubsec.h
628 UBSEC_NO_RNG opt_ubsec.h
629
630 # options for hifn driver
631 HIFN_DEBUG opt_hifn.h
632 HIFN_RNDTEST opt_hifn.h
633
634 # options for safenet driver
635 SAFE_DEBUG opt_safe.h
636 SAFE_NO_RNG opt_safe.h
637 SAFE_RNDTEST opt_safe.h
638
639 # syscons options
640 MAXCONS opt_syscons.h
641 SC_ALT_MOUSE_IMAGE opt_syscons.h
642 SC_CUT_SPACES2TABS opt_syscons.h
643 SC_CUT_SEPCHARS opt_syscons.h
644 SC_DEBUG_LEVEL opt_syscons.h
645 SC_DFLT_FONT opt_syscons.h
646 SC_DISABLE_KDBKEY opt_syscons.h
647 SC_DISABLE_REBOOT opt_syscons.h
648 SC_HISTORY_SIZE opt_syscons.h
649 SC_KERNEL_CONS_ATTR opt_syscons.h
650 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
651 SC_MOUSE_CHAR opt_syscons.h
652 SC_NO_CUTPASTE opt_syscons.h
653 SC_NO_FONT_LOADING opt_syscons.h
654 SC_NO_HISTORY opt_syscons.h
655 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
656 SC_NO_SYSMOUSE opt_syscons.h
657 SC_NORM_ATTR opt_syscons.h
658 SC_NORM_REV_ATTR opt_syscons.h
659 SC_PIXEL_MODE opt_syscons.h
660 SC_RENDER_DEBUG opt_syscons.h
661 SC_TWOBUTTON_MOUSE opt_syscons.h
662
663 # kbd options
664 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
665 KBD_INSTALL_CDEV opt_kbd.h
666 KBD_MAXRETRY opt_kbd.h
667 KBD_MAXWAIT opt_kbd.h
668 KBD_RESETDELAY opt_kbd.h
669 KBDIO_DEBUG opt_kbd.h
670
671 # options for the Atheros HAL (only useful with source code)
672 AH_SUPPORT_AR5210 opt_ah.h
673 AH_SUPPORT_AR5211 opt_ah.h
674 AH_SUPPORT_AR5212 opt_ah.h
675 AH_DEBUG opt_ah.h
676 AH_DEBUG_ALQ opt_ah.h
677 AH_ASSERT opt_ah.h
678
679 # dcons options
680 DCONS_BUF_SIZE opt_dcons.h
681 DCONS_POLL_HZ opt_dcons.h
682 DCONS_FORCE_CONSOLE opt_dcons.h
683 DCONS_FORCE_GDB opt_dcons.h
Cache object: 7c98678030949730b972053601abf819
|