Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/conf/options
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 # $FreeBSD: releng/6.0/sys/conf/options 151061 2005-10-07 14:00:06Z glebius $ 2 # 3 # On the handling of kernel options 4 # 5 # All kernel options should be listed in NOTES, with suitable 6 # descriptions. Negative options (options that make some code not 7 # compile) should be commented out; LINT (generated from NOTES) should 8 # compile as much code as possible. Try to structure option-using 9 # code so that a single option only switch code on, or only switch 10 # code off, to make it possible to have a full compile-test. If 11 # necessary, you can check for COMPILING_LINT to get maximum code 12 # coverage. 13 # 14 # All new options shall also be listed in either "conf/options" or 15 # "conf/options.<machine>". Options that affect a single source-file 16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17 # that affect multiple files should either go in "opt_global.h" if 18 # this is a kernel-wide option (used just about everywhere), or in 19 # "opt_<option-name-in-lower-case>.h" if it affect only some files. 20 # Note that the effect of listing only an option without a 21 # header-file-name in conf/options (and cousins) is that the last 22 # convention is followed. 23 # 24 # This handling scheme is not yet fully implemented. 25 # 26 # 27 # Format of this file: 28 # Option name filename 29 # 30 # If filename is missing, the default is 31 # opt_<name-of-option-in-lower-case>.h 32 33 AAC_DEBUG opt_aac.h 34 AHC_ALLOW_MEMIO opt_aic7xxx.h 35 AHC_TMODE_ENABLE opt_aic7xxx.h 36 AHC_DUMP_EEPROM opt_aic7xxx.h 37 AHC_DEBUG opt_aic7xxx.h 38 AHC_DEBUG_OPTS opt_aic7xxx.h 39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40 AHD_DEBUG opt_aic79xx.h 41 AHD_DEBUG_OPTS opt_aic79xx.h 42 AHD_TMODE_ENABLE opt_aic79xx.h 43 AHD_REG_PRETTY_PRINT opt_aic79xx.h 44 ADW_ALLOW_MEMIO opt_adw.h 45 46 TWA_DEBUG opt_twa.h 47 TWA_FLASH_FIRMWARE opt_twa.h 48 49 # Debugging options. 50 DDB 51 DDB_NUMSYM opt_ddb.h 52 GDB 53 GDBSPEED opt_gdb.h 54 KDB opt_global.h 55 KDB_TRACE opt_kdb.h 56 KDB_UNATTENDED opt_kdb.h 57 SYSCTL_DEBUG opt_sysctl.h 58 59 # Miscellaneous options. 60 ADAPTIVE_GIANT opt_adaptive_mutexes.h 61 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 62 ALQ 63 CODA_COMPAT_5 opt_coda.h 64 COMPAT_43 opt_compat.h 65 COMPAT_FREEBSD4 opt_compat.h 66 COMPAT_FREEBSD5 opt_compat.h 67 COMPILING_LINT opt_global.h 68 CONSPEED opt_comconsole.h 69 CY_PCI_FASTINTR 70 DIRECTIO opt_directio.h 71 FULL_PREEMPTION opt_sched.h 72 PREEMPTION opt_sched.h 73 IPI_PREEMPTION opt_sched.h 74 GEOM_AES opt_geom.h 75 GEOM_APPLE opt_geom.h 76 GEOM_BDE opt_geom.h 77 GEOM_BSD opt_geom.h 78 GEOM_CONCAT opt_geom.h 79 GEOM_ELI opt_geom.h 80 GEOM_FOX opt_geom.h 81 GEOM_GATE opt_geom.h 82 GEOM_GPT opt_geom.h 83 GEOM_LABEL opt_geom.h 84 GEOM_MBR opt_geom.h 85 GEOM_MIRROR opt_geom.h 86 GEOM_NOP opt_geom.h 87 GEOM_PC98 opt_geom.h 88 GEOM_RAID3 opt_geom.h 89 GEOM_SHSEC opt_geom.h 90 GEOM_STRIPE opt_geom.h 91 GEOM_SUNLABEL opt_geom.h 92 GEOM_UZIP opt_geom.h 93 GEOM_VOL opt_geom.h 94 GEOM_ZERO opt_geom.h 95 KSTACK_MAX_PAGES 96 KSTACK_PAGES 97 KTRACE 98 KTRACE_REQUEST_POOL opt_ktrace.h 99 LIBICONV 100 MAC 101 MAC_ALWAYS_LABEL_MBUF opt_mac.h 102 MAC_BIBA opt_dontuse.h 103 MAC_BSDEXTENDED opt_dontuse.h 104 MAC_DEBUG opt_mac.h 105 MAC_IFOFF opt_dontuse.h 106 MAC_LOMAC opt_dontuse.h 107 MAC_MLS opt_dontuse.h 108 MAC_NONE opt_dontuse.h 109 MAC_PARTITION opt_dontuse.h 110 MAC_PORTACL opt_dontuse.h 111 MAC_SEEOTHERUIDS opt_dontuse.h 112 MAC_STATIC opt_mac.h 113 MAC_STUB opt_dontuse.h 114 MAC_TEST opt_dontuse.h 115 MD_ROOT opt_md.h 116 MD_ROOT_SIZE opt_md.h 117 MPROF_BUFFERS opt_mprof.h 118 MPROF_HASH_SIZE opt_mprof.h 119 MUTEX_WAKE_ALL 120 NSWBUF_MIN opt_swap.h 121 PANIC_REBOOT_WAIT_TIME opt_panic.h 122 PPS_SYNC opt_ntp.h 123 PUC_FASTINTR opt_puc.h 124 QUOTA 125 SCHED_4BSD opt_sched.h 126 SCHED_ULE opt_sched.h 127 SHOW_BUSYBUFS 128 SLEEPQUEUE_PROFILING 129 SPX_HACK 130 SUIDDIR opt_suiddir.h 131 MSGMNB opt_sysvipc.h 132 MSGMNI opt_sysvipc.h 133 MSGSEG opt_sysvipc.h 134 MSGSSZ opt_sysvipc.h 135 MSGTQL opt_sysvipc.h 136 SEMMAP opt_sysvipc.h 137 SEMMNI opt_sysvipc.h 138 SEMMNS opt_sysvipc.h 139 SEMMNU opt_sysvipc.h 140 SEMMSL opt_sysvipc.h 141 SEMOPM opt_sysvipc.h 142 SEMUME opt_sysvipc.h 143 SHMALL opt_sysvipc.h 144 SHMMAX opt_sysvipc.h 145 SHMMAXPGS opt_sysvipc.h 146 SHMMIN opt_sysvipc.h 147 SHMMNI opt_sysvipc.h 148 SHMSEG opt_sysvipc.h 149 SYSVMSG opt_sysvipc.h 150 SYSVSEM opt_sysvipc.h 151 SYSVSHM opt_sysvipc.h 152 SW_WATCHDOG opt_watchdog.h 153 TURNSTILE_PROFILING 154 TTYHOG opt_tty.h 155 VFS_AIO 156 WLCACHE opt_wavelan.h 157 WLDEBUG opt_wavelan.h 158 159 # POSIX kernel options 160 P1003_1B_SEMAPHORES opt_posix.h 161 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h 162 163 # Do we want the config file compiled into the kernel? 164 INCLUDE_CONFIG_FILE opt_config.h 165 166 # Options for static filesystems. These should only be used at config 167 # time, since the corresponding lkms cannot work if there are any static 168 # dependencies. Unusability is enforced by hiding the defines for the 169 # options in a never-included header. 170 CD9660 opt_dontuse.h 171 CODA opt_dontuse.h 172 EXT2FS opt_dontuse.h 173 FDESCFS opt_dontuse.h 174 HPFS opt_dontuse.h 175 LINPROCFS opt_dontuse.h 176 MSDOSFS opt_dontuse.h 177 NTFS opt_dontuse.h 178 NULLFS opt_dontuse.h 179 NWFS opt_dontuse.h 180 PORTALFS opt_dontuse.h 181 PROCFS opt_dontuse.h 182 PSEUDOFS opt_dontuse.h 183 REISERFS opt_dontuse.h 184 SMBFS opt_dontuse.h 185 UDF opt_dontuse.h 186 UMAPFS opt_dontuse.h 187 UNIONFS opt_dontuse.h 188 189 # Pseudofs debugging 190 PSEUDOFS_TRACE opt_pseudofs.h 191 192 # Broken - ffs_snapshot() dependency from ufs_lookup() :-( 193 FFS opt_ffs_broken_fixme.h 194 195 # These static filesystems have one slightly bogus static dependency in 196 # sys/i386/i386/autoconf.c. If any of these filesystems are 197 # statically compiled into the kernel, code for mounting them as root 198 # filesystems will be enabled - but look below. 199 NFSCLIENT opt_nfs.h 200 NFSSERVER opt_nfs.h 201 202 # filesystems and libiconv bridge 203 CD9660_ICONV opt_dontuse.h 204 MSDOSFS_ICONV opt_dontuse.h 205 NTFS_ICONV opt_dontuse.h 206 UDF_ICONV opt_dontuse.h 207 208 # If you are following the conditions in the copyright, 209 # you can enable soft-updates which will speed up a lot of thigs 210 # and make the system safer from crashes at the same time. 211 # otherwise a STUB module will be compiled in. 212 SOFTUPDATES opt_ffs.h 213 214 # Enabling this option turns on support for Access Control Lists in UFS, 215 # which can be used to support high security configurations. Depends on 216 # UFS_EXTATTR. 217 UFS_ACL opt_ufs.h 218 219 # Enabling this option turns on support for extended attributes in UFS-based 220 # filesystems, which can be used to support high security configurations 221 # as well as new filesystem features. 222 UFS_EXTATTR opt_ufs.h 223 UFS_EXTATTR_AUTOSTART opt_ufs.h 224 225 # Enable fast hash lookups for large directories on UFS-based filesystems. 226 UFS_DIRHASH opt_ufs.h 227 228 # The below sentence is not in English, and neither is this one. 229 # We plan to remove the static dependences above, with a 230 # <filesystem>_ROOT option to control if it usable as root. This list 231 # allows these options to be present in config files already (though 232 # they won't make any difference yet). 233 NFS_ROOT opt_nfsroot.h 234 235 # SMB/CIFS requester 236 NETSMB opt_netsmb.h 237 NETSMBCRYPTO opt_netsmb.h 238 239 # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"! 240 MSDOSFS_LARGE opt_msdosfs.h 241 242 # Options used only in subr_param.c. 243 HZ opt_param.h 244 MAXFILES opt_param.h 245 NBUF opt_param.h 246 NMBCLUSTERS opt_param.h 247 NSFBUFS opt_param.h 248 VM_BCACHE_SIZE_MAX opt_param.h 249 VM_SWZONE_SIZE_MAX opt_param.h 250 MAXUSERS 251 DFLDSIZ opt_param.h 252 MAXDSIZ opt_param.h 253 MAXSSIZ opt_param.h 254 255 # Generic SCSI options. 256 CAM_MAX_HIGHPOWER opt_cam.h 257 CAMDEBUG opt_cam.h 258 CAM_DEBUG_DELAY opt_cam.h 259 CAM_DEBUG_BUS opt_cam.h 260 CAM_DEBUG_TARGET opt_cam.h 261 CAM_DEBUG_LUN opt_cam.h 262 CAM_DEBUG_FLAGS opt_cam.h 263 CAM_NEW_TRAN_CODE opt_cam.h 264 SCSI_DELAY opt_scsi.h 265 SCSI_NO_SENSE_STRINGS opt_scsi.h 266 SCSI_NO_OP_STRINGS opt_scsi.h 267 268 # Options used only in cam/scsi/scsi_cd.c 269 CHANGER_MIN_BUSY_SECONDS opt_cd.h 270 CHANGER_MAX_BUSY_SECONDS opt_cd.h 271 272 # Options used only in cam/scsi/scsi_sa.c. 273 SA_IO_TIMEOUT opt_sa.h 274 SA_SPACE_TIMEOUT opt_sa.h 275 SA_REWIND_TIMEOUT opt_sa.h 276 SA_ERASE_TIMEOUT opt_sa.h 277 SA_1FM_AT_EOD opt_sa.h 278 279 # Options used only in cam/scsi/scsi_pt.c 280 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 281 282 # Options used only in cam/scsi/scsi_ses.c 283 SES_ENABLE_PASSTHROUGH opt_ses.h 284 285 # Options used in dev/sym/ (Symbios SCSI driver). 286 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 287 # Allows the ncr to take precedence 288 # 1 (1<<0) -> 810a, 860 289 # 2 (1<<1) -> 825a, 875, 885, 895 290 # 4 (1<<2) -> 895a, 896, 1510d 291 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 292 # disabled:0 (default), enabled:1 293 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 294 # disabled:0, enabled:1 (default) 295 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 296 # default:8, range:[1..64] 297 298 # Options used only in pci/ncr.c 299 SCSI_NCR_DEBUG opt_ncr.h 300 SCSI_NCR_MAX_SYNC opt_ncr.h 301 SCSI_NCR_MAX_WIDE opt_ncr.h 302 SCSI_NCR_MYADDR opt_ncr.h 303 304 # Options used only in dev/isp/* 305 ISP_TARGET_MODE opt_isp.h 306 ISP_FW_CRASH_DUMP opt_isp.h 307 308 # Options used in the 'ata' ATA/ATAPI driver 309 ATA_STATIC_ID opt_ata.h 310 ATA_NOPCI opt_ata.h 311 312 # Net stuff. 313 ACCEPT_FILTER_DATA 314 ACCEPT_FILTER_HTTP 315 ALTQ opt_global.h 316 ALTQ_CBQ opt_altq.h 317 ALTQ_RED opt_altq.h 318 ALTQ_RIO opt_altq.h 319 ALTQ_HFSC opt_altq.h 320 ALTQ_CDNR opt_altq.h 321 ALTQ_PRIQ opt_altq.h 322 ALTQ_NOPCC opt_altq.h 323 ALTQ_DEBUG opt_altq.h 324 BOOTP opt_bootp.h 325 BOOTP_COMPAT opt_bootp.h 326 BOOTP_NFSROOT opt_bootp.h 327 BOOTP_NFSV3 opt_bootp.h 328 BOOTP_WIRED_TO opt_bootp.h 329 BRIDGE opt_bdg.h 330 DEVICE_POLLING 331 DEV_PF opt_pf.h 332 DEV_PFLOG opt_pf.h 333 DEV_PFSYNC opt_pf.h 334 ETHER_II opt_ef.h 335 ETHER_8023 opt_ef.h 336 ETHER_8022 opt_ef.h 337 ETHER_SNAP opt_ef.h 338 MROUTING opt_mrouting.h 339 PIM opt_mrouting.h 340 INET opt_inet.h 341 INET6 opt_inet6.h 342 IPSEC opt_ipsec.h 343 IPSEC_ESP opt_ipsec.h 344 IPSEC_DEBUG opt_ipsec.h 345 IPSEC_FILTERGIF opt_ipsec.h 346 FAST_IPSEC opt_ipsec.h 347 IPDIVERT 348 DUMMYNET opt_ipdn.h 349 IPFILTER opt_ipfilter.h 350 IPFILTER_LOG opt_ipfilter.h 351 IPFILTER_LOOKUP opt_ipfilter.h 352 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 353 IPFIREWALL opt_ipfw.h 354 IPFIREWALL_VERBOSE opt_ipfw.h 355 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 356 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 357 IPFIREWALL_FORWARD opt_ipfw.h 358 IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h 359 IPV6FIREWALL opt_ip6fw.h 360 IPV6FIREWALL_VERBOSE opt_ip6fw.h 361 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 362 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 363 IPSTEALTH 364 IPX 365 IPXIP opt_ipx.h 366 LIBMBPOOL 367 LIBMCHAIN 368 LIBALIAS 369 MBUF_STRESS_TEST opt_mbuf_stress_test.h 370 NCP 371 NETATALK opt_atalk.h 372 NET_WITH_GIANT opt_net.h 373 PPP_BSDCOMP opt_ppp.h 374 PPP_DEFLATE opt_ppp.h 375 PPP_FILTER opt_ppp.h 376 SLIP_IFF_OPTS opt_slip.h 377 TCPDEBUG 378 TCP_SIGNATURE opt_inet.h 379 TCP_SACK_DEBUG opt_tcp_sack.h 380 TCP_DROP_SYNFIN opt_tcp_input.h 381 XBONEHACK 382 383 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 384 # Each netgraph node type can be either be compiled into the kernel 385 # or loaded dynamically. To get the former, include the corresponding 386 # option below. Each type has its own man page, e.g. ng_async(4). 387 NETGRAPH 388 NETGRAPH_DEBUG opt_netgraph.h 389 NETGRAPH_ASYNC opt_netgraph.h 390 NETGRAPH_ATMLLC opt_netgraph.h 391 NETGRAPH_ATM_ATMPIF opt_netgraph.h 392 NETGRAPH_BLUETOOTH opt_netgraph.h 393 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 394 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 395 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 396 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 397 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 398 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 399 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 400 NETGRAPH_BPF opt_netgraph.h 401 NETGRAPH_BRIDGE opt_netgraph.h 402 NETGRAPH_CISCO opt_netgraph.h 403 NETGRAPH_DEVICE opt_netgraph.h 404 NETGRAPH_ECHO opt_netgraph.h 405 NETGRAPH_EIFACE opt_netgraph.h 406 NETGRAPH_ETHER opt_netgraph.h 407 NETGRAPH_FEC opt_netgraph.h 408 NETGRAPH_FRAME_RELAY opt_netgraph.h 409 NETGRAPH_GIF opt_netgraph.h 410 NETGRAPH_GIF_DEMUX opt_netgraph.h 411 NETGRAPH_HOLE opt_netgraph.h 412 NETGRAPH_IFACE opt_netgraph.h 413 NETGRAPH_IP_INPUT opt_netgraph.h 414 NETGRAPH_IPFW opt_netgraph.h 415 NETGRAPH_KSOCKET opt_netgraph.h 416 NETGRAPH_L2TP opt_netgraph.h 417 NETGRAPH_LMI opt_netgraph.h 418 # MPPC compression requires proprietary files (not included) 419 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 420 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 421 NETGRAPH_NAT opt_netgraph.h 422 NETGRAPH_NETFLOW opt_netgraph.h 423 NETGRAPH_ONE2MANY opt_netgraph.h 424 NETGRAPH_PPP opt_netgraph.h 425 NETGRAPH_PPPOE opt_netgraph.h 426 NETGRAPH_PPTPGRE opt_netgraph.h 427 NETGRAPH_RFC1490 opt_netgraph.h 428 NETGRAPH_SOCKET opt_netgraph.h 429 NETGRAPH_SPLIT opt_netgraph.h 430 NETGRAPH_SPPP opt_netgraph.h 431 NETGRAPH_TCPMSS opt_netgraph.h 432 NETGRAPH_TEE opt_netgraph.h 433 NETGRAPH_TTY opt_netgraph.h 434 NETGRAPH_UI opt_netgraph.h 435 NETGRAPH_VJC opt_netgraph.h 436 437 # NgATM options 438 NGATM_ATM opt_netgraph.h 439 NGATM_ATMBASE opt_netgraph.h 440 NGATM_SSCOP opt_netgraph.h 441 NGATM_SSCFU opt_netgraph.h 442 NGATM_UNI opt_netgraph.h 443 NGATM_CCATM opt_netgraph.h 444 445 # DRM options 446 DRM_DEBUG opt_drm.h 447 448 ZERO_COPY_SOCKETS opt_zero.h 449 TI_PRIVATE_JUMBOS opt_ti.h 450 TI_JUMBO_HDRSPLIT opt_ti.h 451 452 # ATM (HARP version) 453 ATM_CORE opt_atm.h 454 ATM_IP opt_atm.h 455 ATM_SIGPVC opt_atm.h 456 ATM_SPANS opt_atm.h 457 ATM_UNI opt_atm.h 458 459 # XXX Conflict: # of devices vs network protocol (Native ATM). 460 # This makes "atm.h" unusable. 461 NATM 462 463 # DPT driver debug flags 464 DPT_MEASURE_PERFORMANCE opt_dpt.h 465 DPT_HANDLE_TIMEOUTS opt_dpt.h 466 DPT_TIMEOUT_FACTOR opt_dpt.h 467 DPT_LOST_IRQ opt_dpt.h 468 DPT_RESET_HBA opt_dpt.h 469 470 # Misc debug flags. Most of these should probably be replaced with 471 # 'DEBUG', and then let people recompile just the interesting modules 472 # with 'make CC="cc -DDEBUG"'. 473 CLUSTERDEBUG opt_debug_cluster.h 474 DEBUG_1284 opt_ppb_1284.h 475 VP0_DEBUG opt_vpo.h 476 LPT_DEBUG opt_lpt.h 477 PLIP_DEBUG opt_plip.h 478 LOCKF_DEBUG opt_debug_lockf.h 479 NETATALKDEBUG opt_atalk.h 480 SI_DEBUG opt_debug_si.h 481 SX_DEBUG opt_debug_sx.h 482 483 # Fb options 484 FB_DEBUG opt_fb.h 485 FB_INSTALL_CDEV opt_fb.h 486 487 # ppbus related options 488 PERIPH_1284 opt_ppb_1284.h 489 DONTPROBE_1284 opt_ppb_1284.h 490 491 # smbus related options 492 ENABLE_ALART opt_intpm.h 493 494 # These cause changes all over the kernel 495 BLKDEV_IOSIZE opt_global.h 496 BURN_BRIDGES opt_global.h 497 DEBUG opt_global.h 498 DEBUG_LOCKS opt_global.h 499 DEBUG_VFS_LOCKS opt_global.h 500 DIAGNOSTIC opt_global.h 501 INVARIANT_SUPPORT opt_global.h 502 INVARIANTS opt_global.h 503 MCLSHIFT opt_global.h 504 MUTEX_DEBUG opt_global.h 505 MUTEX_NOINLINE opt_global.h 506 MUTEX_PROFILING opt_global.h 507 MSIZE opt_global.h 508 REGRESSION opt_global.h 509 RESTARTABLE_PANICS opt_global.h 510 VFS_BIO_DEBUG opt_global.h 511 512 # These are VM related options 513 VM_KMEM_SIZE opt_vm.h 514 VM_KMEM_SIZE_SCALE opt_vm.h 515 VM_KMEM_SIZE_MAX opt_vm.h 516 NO_SWAPPING opt_vm.h 517 MALLOC_MAKE_FAILURES opt_vm.h 518 MALLOC_PROFILE opt_vm.h 519 PQ_NOOPT opt_vmpage.h 520 PQ_NORMALCACHE opt_vmpage.h 521 PQ_MEDIUMCACHE opt_vmpage.h 522 PQ_LARGECACHE opt_vmpage.h 523 PQ_HUGECACHE opt_vmpage.h 524 PQ_CACHESIZE opt_vmpage.h 525 526 # The MemGuard replacement allocator used for tamper-after-free detection 527 DEBUG_MEMGUARD opt_vm.h 528 529 # Standard SMP options 530 SMP opt_global.h 531 532 # Size of the kernel message buffer 533 MSGBUF_SIZE opt_msgbuf.h 534 535 # NFS options 536 NFS_MINATTRTIMO opt_nfs.h 537 NFS_MAXATTRTIMO opt_nfs.h 538 NFS_MINDIRATTRTIMO opt_nfs.h 539 NFS_MAXDIRATTRTIMO opt_nfs.h 540 NFS_GATHERDELAY opt_nfs.h 541 NFS_WDELAYHASHSIZ opt_nfs.h 542 NFS_DEBUG opt_nfs.h 543 544 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 545 OVERRIDE_CARD opt_bktr.h 546 OVERRIDE_TUNER opt_bktr.h 547 OVERRIDE_DBX opt_bktr.h 548 OVERRIDE_MSP opt_bktr.h 549 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 550 BROOKTREE_ALLOC_PAGES opt_bktr.h 551 BKTR_OVERRIDE_CARD opt_bktr.h 552 BKTR_OVERRIDE_TUNER opt_bktr.h 553 BKTR_OVERRIDE_DBX opt_bktr.h 554 BKTR_OVERRIDE_MSP opt_bktr.h 555 BKTR_SYSTEM_DEFAULT opt_bktr.h 556 BKTR_ALLOC_PAGES opt_bktr.h 557 BKTR_USE_PLL opt_bktr.h 558 BKTR_GPIO_ACCESS opt_bktr.h 559 BKTR_NO_MSP_RESET opt_bktr.h 560 BKTR_430_FX_MODE opt_bktr.h 561 BKTR_SIS_VIA_MODE opt_bktr.h 562 BKTR_USE_FREEBSD_SMBUS opt_bktr.h 563 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 564 565 # options for serial support 566 COM_ESP opt_sio.h 567 COM_MULTIPORT opt_sio.h 568 BREAK_TO_DEBUGGER opt_comconsole.h 569 ALT_BREAK_TO_DEBUGGER opt_comconsole.h 570 571 # Options to support PPS 572 UART_PPS_ON_CTS opt_uart.h 573 574 # options for bus/device framework 575 BUS_DEBUG opt_bus.h 576 577 # options for USB support 578 USB_DEBUG opt_usb.h 579 USBVERBOSE opt_usb.h 580 UKBD_DFLT_KEYMAP opt_ukbd.h 581 UPLCOM_INTR_INTERVAL opt_uplcom.h 582 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 583 UVSCOM_INTR_INTERVAL opt_uvscom.h 584 585 # Embedded system options 586 INIT_PATH opt_init_path.h 587 588 ROOTDEVNAME opt_rootdevname.h 589 590 FDC_DEBUG opt_fdc.h 591 PCFCLOCK_VERBOSE opt_pcfclock.h 592 PCFCLOCK_MAX_RETRIES opt_pcfclock.h 593 TDFX_LINUX opt_tdfx.h 594 595 KTR opt_global.h 596 KTR_ALQ opt_ktr.h 597 KTR_MASK opt_ktr.h 598 KTR_CPUMASK opt_ktr.h 599 KTR_COMPILE opt_global.h 600 KTR_ENTRIES opt_global.h 601 KTR_VERBOSE opt_ktr.h 602 WITNESS opt_global.h 603 WITNESS_KDB opt_witness.h 604 WITNESS_SKIPSPIN opt_witness.h 605 606 # options for ACPI support 607 ACPI_DEBUG opt_acpi.h 608 ACPI_MAX_THREADS opt_acpi.h 609 ACPI_NO_SEMAPHORES opt_acpi.h 610 ACPICA_PEDANTIC opt_acpi.h 611 612 # options for DEVFS, see sys/fs/devfs/devfs.h 613 NDEVFSINO opt_devfs.h 614 NDEVFSOVERFLOW opt_devfs.h 615 616 # various 'device presence' options. 617 DEV_BPF opt_bpf.h 618 DEV_ISA opt_isa.h 619 DEV_MCA opt_mca.h 620 DEV_CARP opt_carp.h 621 DEV_SPLASH opt_splash.h 622 623 EISA_SLOTS opt_eisa.h 624 625 # ed driver 626 ED_NO_MIIBUS opt_ed.h 627 ED_HPP opt_ed.h 628 ED_3C503 opt_ed.h 629 ED_SIC opt_ed.h 630 631 # bge driver 632 BGE_FAKE_AUTONEG opt_bge.h 633 634 # wi driver 635 WI_SYMBOL_FIRMWARE opt_wi.h 636 637 SOCKBUF_DEBUG opt_global.h 638 639 # options for ubsec driver 640 UBSEC_DEBUG opt_ubsec.h 641 UBSEC_RNDTEST opt_ubsec.h 642 UBSEC_NO_RNG opt_ubsec.h 643 644 # options for hifn driver 645 HIFN_DEBUG opt_hifn.h 646 HIFN_RNDTEST opt_hifn.h 647 648 # options for safenet driver 649 SAFE_DEBUG opt_safe.h 650 SAFE_NO_RNG opt_safe.h 651 SAFE_RNDTEST opt_safe.h 652 653 # syscons options 654 MAXCONS opt_syscons.h 655 SC_ALT_MOUSE_IMAGE opt_syscons.h 656 SC_CUT_SPACES2TABS opt_syscons.h 657 SC_CUT_SEPCHARS opt_syscons.h 658 SC_DEBUG_LEVEL opt_syscons.h 659 SC_DFLT_FONT opt_syscons.h 660 SC_DISABLE_KDBKEY opt_syscons.h 661 SC_DISABLE_REBOOT opt_syscons.h 662 SC_HISTORY_SIZE opt_syscons.h 663 SC_KERNEL_CONS_ATTR opt_syscons.h 664 SC_KERNEL_CONS_REV_ATTR opt_syscons.h 665 SC_MOUSE_CHAR opt_syscons.h 666 SC_NO_CUTPASTE opt_syscons.h 667 SC_NO_FONT_LOADING opt_syscons.h 668 SC_NO_HISTORY opt_syscons.h 669 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 670 SC_NO_SYSMOUSE opt_syscons.h 671 SC_NORM_ATTR opt_syscons.h 672 SC_NORM_REV_ATTR opt_syscons.h 673 SC_PIXEL_MODE opt_syscons.h 674 SC_RENDER_DEBUG opt_syscons.h 675 SC_TWOBUTTON_MOUSE opt_syscons.h 676 677 # kbd options 678 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 679 KBD_INSTALL_CDEV opt_kbd.h 680 KBD_MAXRETRY opt_kbd.h 681 KBD_MAXWAIT opt_kbd.h 682 KBD_RESETDELAY opt_kbd.h 683 KBDIO_DEBUG opt_kbd.h 684 685 # options for the Atheros HAL (only useful with source code) 686 AH_SUPPORT_AR5210 opt_ah.h 687 AH_SUPPORT_AR5211 opt_ah.h 688 AH_SUPPORT_AR5212 opt_ah.h 689 AH_SUPPORT_5111 opt_ah.h 690 AH_SUPPORT_5112 opt_ah.h 691 AH_SUPPORT_2413 opt_ah.h 692 AH_DEBUG opt_ah.h 693 AH_DEBUG_ALQ opt_ah.h 694 AH_ASSERT opt_ah.h 695 696 # dcons options 697 DCONS_BUF_SIZE opt_dcons.h 698 DCONS_POLL_HZ opt_dcons.h 699 DCONS_FORCE_CONSOLE opt_dcons.h 700 DCONS_FORCE_GDB opt_dcons.h 701 702 # Static unit counts 703 NI4BTRC opt_i4b.h 704 NI4BRBCH opt_i4b.h 705 NI4BTEL opt_i4b.h 706 NI4BIPR opt_i4b.h 707 NI4BING opt_i4b.h 708 NI4BISPPP opt_i4b.h 709 710 # VFS options 711 LOOKUP_SHARED opt_vfs.h 712 713 # HWPMC options 714 HWPMC_HOOKS
Cache object: 5b31c6bb39662d082859f087f1efc596
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]