fxr.watson.org: FREEBSD-8-3 sys/conf/options

FreeBSD/Linux Kernel Cross Reference
sys/conf/options

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

1 # $FreeBSD: releng/8.3/sys/conf/options 231717 2012-02-14 22:49:34Z luigi $ 2 # 3 # On the handling of kernel options 4 # 5 # All kernel options should be listed in NOTES, with suitable 6 # descriptions. Negative options (options that make some code not 7 # compile) should be commented out; LINT (generated from NOTES) should 8 # compile as much code as possible. Try to structure option-using 9 # code so that a single option only switch code on, or only switch 10 # code off, to make it possible to have a full compile-test. If 11 # necessary, you can check for COMPILING_LINT to get maximum code 12 # coverage. 13 # 14 # All new options shall also be listed in either "conf/options" or 15 # "conf/options.<machine>". Options that affect a single source-file 16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17 # that affect multiple files should either go in "opt_global.h" if 18 # this is a kernel-wide option (used just about everywhere), or in 19 # "opt_<option-name-in-lower-case>.h" if it affects only some files. 20 # Note that the effect of listing only an option without a 21 # header-file-name in conf/options (and cousins) is that the last 22 # convention is followed. 23 # 24 # This handling scheme is not yet fully implemented. 25 # 26 # 27 # Format of this file: 28 # Option name filename 29 # 30 # If filename is missing, the default is 31 # opt_<name-of-option-in-lower-case>.h 32 33 AAC_DEBUG opt_aac.h 34 AHC_ALLOW_MEMIO opt_aic7xxx.h 35 AHC_TMODE_ENABLE opt_aic7xxx.h 36 AHC_DUMP_EEPROM opt_aic7xxx.h 37 AHC_DEBUG opt_aic7xxx.h 38 AHC_DEBUG_OPTS opt_aic7xxx.h 39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40 AHD_DEBUG opt_aic79xx.h 41 AHD_DEBUG_OPTS opt_aic79xx.h 42 AHD_TMODE_ENABLE opt_aic79xx.h 43 AHD_REG_PRETTY_PRINT opt_aic79xx.h 44 ADW_ALLOW_MEMIO opt_adw.h 45 46 TWA_DEBUG opt_twa.h 47 TWA_FLASH_FIRMWARE opt_twa.h 48 49 # Debugging options. 50 DDB 51 DDB_BUFR_SIZE opt_ddb.h 52 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54 DDB_CTF opt_ddb.h 55 DDB_NUMSYM opt_ddb.h 56 GDB 57 KDB opt_global.h 58 KDB_TRACE opt_kdb.h 59 KDB_UNATTENDED opt_kdb.h 60 SYSCTL_DEBUG opt_sysctl.h 61 62 # Miscellaneous options. 63 ADAPTIVE_LOCKMGRS 64 ALQ 65 AUDIT opt_global.h 66 CODA_COMPAT_5 opt_coda.h 67 COMPAT_43 opt_compat.h 68 COMPAT_43TTY opt_compat.h 69 COMPAT_FREEBSD4 opt_compat.h 70 COMPAT_FREEBSD5 opt_compat.h 71 COMPAT_FREEBSD6 opt_compat.h 72 COMPAT_FREEBSD7 opt_compat.h 73 COMPILING_LINT opt_global.h 74 CY_PCI_FASTINTR 75 DEADLKRES opt_watchdog.h 76 DIRECTIO 77 FULL_PREEMPTION opt_sched.h 78 IPI_PREEMPTION opt_sched.h 79 GEOM_AES opt_geom.h 80 GEOM_BDE opt_geom.h 81 GEOM_BSD opt_geom.h 82 GEOM_CACHE opt_geom.h 83 GEOM_CONCAT opt_geom.h 84 GEOM_ELI opt_geom.h 85 GEOM_FOX opt_geom.h 86 GEOM_GATE opt_geom.h 87 GEOM_JOURNAL opt_geom.h 88 GEOM_LABEL opt_geom.h 89 GEOM_LINUX_LVM opt_geom.h 90 GEOM_MBR opt_geom.h 91 GEOM_MIRROR opt_geom.h 92 GEOM_MULTIPATH opt_geom.h 93 GEOM_NOP opt_geom.h 94 GEOM_PART_APM opt_geom.h 95 GEOM_PART_BSD opt_geom.h 96 GEOM_PART_EBR opt_geom.h 97 GEOM_PART_EBR_COMPAT opt_geom.h 98 GEOM_PART_GPT opt_geom.h 99 GEOM_PART_MBR opt_geom.h 100 GEOM_PART_PC98 opt_geom.h 101 GEOM_PART_VTOC8 opt_geom.h 102 GEOM_PC98 opt_geom.h 103 GEOM_RAID opt_geom.h 104 GEOM_RAID3 opt_geom.h 105 GEOM_SHSEC opt_geom.h 106 GEOM_STRIPE opt_geom.h 107 GEOM_SUNLABEL opt_geom.h 108 GEOM_UZIP opt_geom.h 109 GEOM_VIRSTOR opt_geom.h 110 GEOM_VOL opt_geom.h 111 GEOM_ZERO opt_geom.h 112 KDTRACE_HOOKS opt_kdtrace.h 113 KSTACK_MAX_PAGES 114 KSTACK_PAGES 115 KTRACE 116 KTRACE_REQUEST_POOL opt_ktrace.h 117 LIBICONV 118 MAC opt_global.h 119 MAC_BIBA opt_dontuse.h 120 MAC_BSDEXTENDED opt_dontuse.h 121 MAC_IFOFF opt_dontuse.h 122 MAC_LOMAC opt_dontuse.h 123 MAC_MLS opt_dontuse.h 124 MAC_NONE opt_dontuse.h 125 MAC_PARTITION opt_dontuse.h 126 MAC_PORTACL opt_dontuse.h 127 MAC_SEEOTHERUIDS opt_dontuse.h 128 MAC_STATIC opt_mac.h 129 MAC_STUB opt_dontuse.h 130 MAC_TEST opt_dontuse.h 131 MD_ROOT opt_md.h 132 MD_ROOT_SIZE opt_md.h 133 MFI_DEBUG opt_mfi.h 134 MFI_DECODE_LOG opt_mfi.h 135 MPROF_BUFFERS opt_mprof.h 136 MPROF_HASH_SIZE opt_mprof.h 137 NEW_PCIB opt_global.h 138 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 139 NO_ADAPTIVE_RWLOCKS 140 NO_ADAPTIVE_SX 141 NO_SYSCTL_DESCR opt_global.h 142 NSWBUF_MIN opt_swap.h 143 MBUF_PACKET_ZONE_DISABLE opt_global.h 144 PANIC_REBOOT_WAIT_TIME opt_panic.h 145 PPC_DEBUG opt_ppc.h 146 PPC_PROBE_CHIPSET opt_ppc.h 147 PPS_SYNC opt_ntp.h 148 PREEMPTION opt_sched.h 149 QUOTA 150 SCHED_4BSD opt_sched.h 151 SCHED_STATS opt_sched.h 152 SCHED_ULE opt_sched.h 153 SLEEPQUEUE_PROFILING 154 SLHCI_DEBUG opt_slhci.h 155 SPX_HACK 156 STACK opt_stack.h 157 SUIDDIR 158 MSGMNB opt_sysvipc.h 159 MSGMNI opt_sysvipc.h 160 MSGSEG opt_sysvipc.h 161 MSGSSZ opt_sysvipc.h 162 MSGTQL opt_sysvipc.h 163 SEMMAP opt_sysvipc.h 164 SEMMNI opt_sysvipc.h 165 SEMMNS opt_sysvipc.h 166 SEMMNU opt_sysvipc.h 167 SEMMSL opt_sysvipc.h 168 SEMOPM opt_sysvipc.h 169 SEMUME opt_sysvipc.h 170 SHMALL opt_sysvipc.h 171 SHMMAX opt_sysvipc.h 172 SHMMAXPGS opt_sysvipc.h 173 SHMMIN opt_sysvipc.h 174 SHMMNI opt_sysvipc.h 175 SHMSEG opt_sysvipc.h 176 SYSVMSG opt_sysvipc.h 177 SYSVSEM opt_sysvipc.h 178 SYSVSHM opt_sysvipc.h 179 SW_WATCHDOG opt_watchdog.h 180 TURNSTILE_PROFILING 181 VFS_AIO 182 VERBOSE_SYSINIT opt_global.h 183 WLCACHE opt_wavelan.h 184 WLDEBUG opt_wavelan.h 185 186 # POSIX kernel options 187 P1003_1B_MQUEUE opt_posix.h 188 P1003_1B_SEMAPHORES opt_posix.h 189 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h 190 191 # Do we want the config file compiled into the kernel? 192 INCLUDE_CONFIG_FILE opt_config.h 193 194 # Options for static filesystems. These should only be used at config 195 # time, since the corresponding lkms cannot work if there are any static 196 # dependencies. Unusability is enforced by hiding the defines for the 197 # options in a never-included header. 198 CD9660 opt_dontuse.h 199 CODA opt_dontuse.h 200 EXT2FS opt_dontuse.h 201 FDESCFS opt_dontuse.h 202 FFS opt_dontuse.h 203 HPFS opt_dontuse.h 204 MSDOSFS opt_dontuse.h 205 NTFS opt_dontuse.h 206 NULLFS opt_dontuse.h 207 NWFS opt_dontuse.h 208 PORTALFS opt_dontuse.h 209 PROCFS opt_dontuse.h 210 PSEUDOFS opt_dontuse.h 211 REISERFS opt_dontuse.h 212 SMBFS opt_dontuse.h 213 TMPFS opt_dontuse.h 214 UDF opt_dontuse.h 215 UNIONFS opt_dontuse.h 216 217 # Pseudofs debugging 218 PSEUDOFS_TRACE opt_pseudofs.h 219 220 # In-kernel GSS-API 221 KGSSAPI opt_kgssapi.h 222 KGSSAPI_DEBUG opt_kgssapi.h 223 224 # These static filesystems have one slightly bogus static dependency in 225 # sys/i386/i386/autoconf.c. If any of these filesystems are 226 # statically compiled into the kernel, code for mounting them as root 227 # filesystems will be enabled - but look below. 228 NFSCLIENT opt_nfs.h 229 NFSSERVER opt_nfs.h 230 231 # Use these options to compile the experimental nfs client and/or 232 # server that supports NFSv4 into a kernel. 233 # NFSCL - client 234 # NFSD - server 235 NFSCL opt_nfs.h 236 NFSD opt_nfs.h 237 238 # filesystems and libiconv bridge 239 CD9660_ICONV opt_dontuse.h 240 MSDOSFS_ICONV opt_dontuse.h 241 NTFS_ICONV opt_dontuse.h 242 UDF_ICONV opt_dontuse.h 243 244 # If you are following the conditions in the copyright, 245 # you can enable soft-updates which will speed up a lot of thigs 246 # and make the system safer from crashes at the same time. 247 # otherwise a STUB module will be compiled in. 248 SOFTUPDATES opt_ffs.h 249 250 # On small, embedded systems, it can be useful to turn off support for 251 # snapshots. It saves about 30-40k for a feature that would be lightly 252 # used, if it is used at all. 253 NO_FFS_SNAPSHOT opt_ffs.h 254 255 # Enabling this option turns on support for Access Control Lists in UFS, 256 # which can be used to support high security configurations. Depends on 257 # UFS_EXTATTR. 258 UFS_ACL opt_ufs.h 259 260 # Enabling this option turns on support for extended attributes in UFS-based 261 # filesystems, which can be used to support high security configurations 262 # as well as new filesystem features. 263 UFS_EXTATTR opt_ufs.h 264 UFS_EXTATTR_AUTOSTART opt_ufs.h 265 266 # Enable fast hash lookups for large directories on UFS-based filesystems. 267 UFS_DIRHASH opt_ufs.h 268 269 # Enable gjournal-based UFS journal. 270 UFS_GJOURNAL opt_ufs.h 271 272 # The below sentence is not in English, and neither is this one. 273 # We plan to remove the static dependences above, with a 274 # <filesystem>_ROOT option to control if it usable as root. This list 275 # allows these options to be present in config files already (though 276 # they won't make any difference yet). 277 NFS_ROOT opt_nfsroot.h 278 279 # SMB/CIFS requester 280 NETSMB opt_netsmb.h 281 282 # Options used only in subr_param.c. 283 HZ opt_param.h 284 MAXFILES opt_param.h 285 NBUF opt_param.h 286 NSFBUFS opt_param.h 287 VM_BCACHE_SIZE_MAX opt_param.h 288 VM_SWZONE_SIZE_MAX opt_param.h 289 MAXUSERS 290 DFLDSIZ opt_param.h 291 MAXDSIZ opt_param.h 292 MAXSSIZ opt_param.h 293 294 # Generic SCSI options. 295 CAM_MAX_HIGHPOWER opt_cam.h 296 CAMDEBUG opt_cam.h 297 CAM_DEBUG_DELAY opt_cam.h 298 CAM_DEBUG_BUS opt_cam.h 299 CAM_DEBUG_TARGET opt_cam.h 300 CAM_DEBUG_LUN opt_cam.h 301 CAM_DEBUG_FLAGS opt_cam.h 302 SCSI_DELAY opt_scsi.h 303 SCSI_NO_SENSE_STRINGS opt_scsi.h 304 SCSI_NO_OP_STRINGS opt_scsi.h 305 306 # Options used only in cam/ata/ata_da.c 307 ADA_TEST_FAILURE opt_ada.h 308 309 # Options used only in cam/scsi/scsi_cd.c 310 CHANGER_MIN_BUSY_SECONDS opt_cd.h 311 CHANGER_MAX_BUSY_SECONDS opt_cd.h 312 313 # Options used only in cam/scsi/scsi_sa.c. 314 SA_IO_TIMEOUT opt_sa.h 315 SA_SPACE_TIMEOUT opt_sa.h 316 SA_REWIND_TIMEOUT opt_sa.h 317 SA_ERASE_TIMEOUT opt_sa.h 318 SA_1FM_AT_EOD opt_sa.h 319 320 # Options used only in cam/scsi/scsi_pt.c 321 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 322 323 # Options used only in cam/scsi/scsi_ses.c 324 SES_ENABLE_PASSTHROUGH opt_ses.h 325 326 # Options used in dev/sym/ (Symbios SCSI driver). 327 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 328 # Allows the ncr to take precedence 329 # 1 (1<<0) -> 810a, 860 330 # 2 (1<<1) -> 825a, 875, 885, 895 331 # 4 (1<<2) -> 895a, 896, 1510d 332 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 333 # disabled:0 (default), enabled:1 334 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 335 # disabled:0, enabled:1 (default) 336 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 337 # default:8, range:[1..64] 338 339 # Options used only in pci/ncr.c 340 SCSI_NCR_DEBUG opt_ncr.h 341 SCSI_NCR_MAX_SYNC opt_ncr.h 342 SCSI_NCR_MAX_WIDE opt_ncr.h 343 SCSI_NCR_MYADDR opt_ncr.h 344 345 # Options used only in dev/isp/* 346 ISP_TARGET_MODE opt_isp.h 347 ISP_FW_CRASH_DUMP opt_isp.h 348 ISP_DEFAULT_ROLES opt_isp.h 349 350 # Options used only in dev/iscsi 351 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 352 353 # Options used in the 'ata' ATA/ATAPI driver 354 ATA_STATIC_ID opt_ata.h 355 ATA_NOPCI opt_ata.h 356 ATA_REQUEST_TIMEOUT opt_ata.h 357 ATA_CAM opt_ata.h 358 359 # Net stuff. 360 ACCEPT_FILTER_DATA 361 ACCEPT_FILTER_DNS 362 ACCEPT_FILTER_HTTP 363 ALTQ opt_global.h 364 ALTQ_CBQ opt_altq.h 365 ALTQ_CDNR opt_altq.h 366 ALTQ_DEBUG opt_altq.h 367 ALTQ_HFSC opt_altq.h 368 ALTQ_NOPCC opt_altq.h 369 ALTQ_PRIQ opt_altq.h 370 ALTQ_RED opt_altq.h 371 ALTQ_RIO opt_altq.h 372 BOOTP opt_bootp.h 373 BOOTP_BLOCKSIZE opt_bootp.h 374 BOOTP_COMPAT opt_bootp.h 375 BOOTP_NFSROOT opt_bootp.h 376 BOOTP_NFSV3 opt_bootp.h 377 BOOTP_WIRED_TO opt_bootp.h 378 DEVICE_POLLING 379 DEV_ENC opt_enc.h 380 DEV_PF opt_pf.h 381 DEV_PFLOG opt_pf.h 382 DEV_PFSYNC opt_pf.h 383 DEV_VLAN opt_vlan.h 384 DUMMYNET opt_ipdn.h 385 ETHER_8022 opt_ef.h 386 ETHER_8023 opt_ef.h 387 ETHER_II opt_ef.h 388 ETHER_SNAP opt_ef.h 389 INET opt_inet.h 390 INET6 opt_inet6.h 391 IPDIVERT 392 IPFILTER opt_ipfilter.h 393 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 394 IPFILTER_LOG opt_ipfilter.h 395 IPFILTER_LOOKUP opt_ipfilter.h 396 IPFIREWALL opt_ipfw.h 397 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 398 IPFIREWALL_FORWARD opt_ipfw.h 399 IPFIREWALL_NAT opt_ipfw.h 400 IPFIREWALL_VERBOSE opt_ipfw.h 401 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 402 IPSEC opt_ipsec.h 403 IPSEC_DEBUG opt_ipsec.h 404 IPSEC_FILTERTUNNEL opt_ipsec.h 405 IPSEC_NAT_T opt_ipsec.h 406 IPSTEALTH 407 IPX 408 KRPC 409 LIBALIAS 410 LIBMBPOOL 411 LIBMCHAIN 412 MBUF_PROFILING 413 MBUF_STRESS_TEST 414 MROUTING opt_mrouting.h 415 NCP 416 NETATALK opt_atalk.h 417 NFSLOCKD 418 RADIX_MPATH opt_mpath.h 419 ROUTETABLES opt_route.h 420 SLIP_IFF_OPTS opt_slip.h 421 TCPDEBUG 422 TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading 423 TCP_SIGNATURE opt_inet.h 424 VLAN_ARRAY opt_vlan.h 425 XBONEHACK 426 FLOWTABLE opt_route.h 427 428 # 429 # SCTP 430 # 431 SCTP opt_sctp.h 432 SCTP_DEBUG opt_sctp.h # Enable debug printfs 433 SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 434 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 435 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 436 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 437 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 438 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 439 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 440 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 441 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 442 # 443 # 444 # 445 446 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 447 # Each netgraph node type can be either be compiled into the kernel 448 # or loaded dynamically. To get the former, include the corresponding 449 # option below. Each type has its own man page, e.g. ng_async(4). 450 NETGRAPH 451 NETGRAPH_DEBUG opt_netgraph.h 452 NETGRAPH_ASYNC opt_netgraph.h 453 NETGRAPH_ATMLLC opt_netgraph.h 454 NETGRAPH_ATM_ATMPIF opt_netgraph.h 455 NETGRAPH_BLUETOOTH opt_netgraph.h 456 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 457 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 458 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 459 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 460 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 461 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 462 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 463 NETGRAPH_BPF opt_netgraph.h 464 NETGRAPH_BRIDGE opt_netgraph.h 465 NETGRAPH_CAR opt_netgraph.h 466 NETGRAPH_CISCO opt_netgraph.h 467 NETGRAPH_DEFLATE opt_netgraph.h 468 NETGRAPH_DEVICE opt_netgraph.h 469 NETGRAPH_ECHO opt_netgraph.h 470 NETGRAPH_EIFACE opt_netgraph.h 471 NETGRAPH_ETHER opt_netgraph.h 472 NETGRAPH_ETHER_ECHO opt_netgraph.h 473 NETGRAPH_FEC opt_netgraph.h 474 NETGRAPH_FRAME_RELAY opt_netgraph.h 475 NETGRAPH_GIF opt_netgraph.h 476 NETGRAPH_GIF_DEMUX opt_netgraph.h 477 NETGRAPH_HOLE opt_netgraph.h 478 NETGRAPH_IFACE opt_netgraph.h 479 NETGRAPH_IP_INPUT opt_netgraph.h 480 NETGRAPH_IPFW opt_netgraph.h 481 NETGRAPH_KSOCKET opt_netgraph.h 482 NETGRAPH_L2TP opt_netgraph.h 483 NETGRAPH_LMI opt_netgraph.h 484 # MPPC compression requires proprietary files (not included) 485 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 486 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 487 NETGRAPH_NAT opt_netgraph.h 488 NETGRAPH_NETFLOW opt_netgraph.h 489 NETGRAPH_ONE2MANY opt_netgraph.h 490 NETGRAPH_PATCH opt_netgraph.h 491 NETGRAPH_PIPE opt_netgraph.h 492 NETGRAPH_PPP opt_netgraph.h 493 NETGRAPH_PPPOE opt_netgraph.h 494 NETGRAPH_PPTPGRE opt_netgraph.h 495 NETGRAPH_PRED1 opt_netgraph.h 496 NETGRAPH_RFC1490 opt_netgraph.h 497 NETGRAPH_SOCKET opt_netgraph.h 498 NETGRAPH_SPLIT opt_netgraph.h 499 NETGRAPH_SPPP opt_netgraph.h 500 NETGRAPH_TAG opt_netgraph.h 501 NETGRAPH_TCPMSS opt_netgraph.h 502 NETGRAPH_TEE opt_netgraph.h 503 NETGRAPH_TTY opt_netgraph.h 504 NETGRAPH_UI opt_netgraph.h 505 NETGRAPH_VJC opt_netgraph.h 506 507 # NgATM options 508 NGATM_ATM opt_netgraph.h 509 NGATM_ATMBASE opt_netgraph.h 510 NGATM_SSCOP opt_netgraph.h 511 NGATM_SSCFU opt_netgraph.h 512 NGATM_UNI opt_netgraph.h 513 NGATM_CCATM opt_netgraph.h 514 515 # DRM options 516 DRM_DEBUG opt_drm.h 517 518 ZERO_COPY_SOCKETS opt_zero.h 519 TI_SF_BUF_JUMBO opt_ti.h 520 TI_JUMBO_HDRSPLIT opt_ti.h 521 BCE_JUMBO_HDRSPLIT opt_bce.h 522 523 # XXX Conflict: # of devices vs network protocol (Native ATM). 524 # This makes "atm.h" unusable. 525 NATM 526 527 # DPT driver debug flags 528 DPT_MEASURE_PERFORMANCE opt_dpt.h 529 DPT_HANDLE_TIMEOUTS opt_dpt.h 530 DPT_TIMEOUT_FACTOR opt_dpt.h 531 DPT_LOST_IRQ opt_dpt.h 532 DPT_RESET_HBA opt_dpt.h 533 534 # Misc debug flags. Most of these should probably be replaced with 535 # 'DEBUG', and then let people recompile just the interesting modules 536 # with 'make CC="cc -DDEBUG"'. 537 CLUSTERDEBUG opt_debug_cluster.h 538 DEBUG_1284 opt_ppb_1284.h 539 VP0_DEBUG opt_vpo.h 540 LPT_DEBUG opt_lpt.h 541 PLIP_DEBUG opt_plip.h 542 LOCKF_DEBUG opt_debug_lockf.h 543 NETATALKDEBUG opt_atalk.h 544 SI_DEBUG opt_debug_si.h 545 546 # Fb options 547 FB_DEBUG opt_fb.h 548 FB_INSTALL_CDEV opt_fb.h 549 550 # ppbus related options 551 PERIPH_1284 opt_ppb_1284.h 552 DONTPROBE_1284 opt_ppb_1284.h 553 554 # smbus related options 555 ENABLE_ALART opt_intpm.h 556 557 # These cause changes all over the kernel 558 BLKDEV_IOSIZE opt_global.h 559 BURN_BRIDGES opt_global.h 560 DEBUG opt_global.h 561 DEBUG_LOCKS opt_global.h 562 DEBUG_VFS_LOCKS opt_global.h 563 DFLTPHYS opt_global.h 564 DIAGNOSTIC opt_global.h 565 INVARIANT_SUPPORT opt_global.h 566 INVARIANTS opt_global.h 567 MAXPHYS opt_global.h 568 MCLSHIFT opt_global.h 569 MUTEX_DEBUG opt_global.h 570 MUTEX_NOINLINE opt_global.h 571 LOCK_PROFILING opt_global.h 572 LOCK_PROFILING_FAST opt_global.h 573 MSIZE opt_global.h 574 REGRESSION opt_global.h 575 RESTARTABLE_PANICS opt_global.h 576 RWLOCK_NOINLINE opt_global.h 577 SX_NOINLINE opt_global.h 578 VFS_BIO_DEBUG opt_global.h 579 580 # These are VM related options 581 VM_KMEM_SIZE opt_vm.h 582 VM_KMEM_SIZE_SCALE opt_vm.h 583 VM_KMEM_SIZE_MAX opt_vm.h 584 VM_NRESERVLEVEL opt_vm.h 585 VM_LEVEL_0_ORDER opt_vm.h 586 NO_SWAPPING opt_vm.h 587 MALLOC_MAKE_FAILURES opt_vm.h 588 MALLOC_PROFILE opt_vm.h 589 590 # The MemGuard replacement allocator used for tamper-after-free detection 591 DEBUG_MEMGUARD opt_vm.h 592 593 # The RedZone malloc(9) protection 594 DEBUG_REDZONE opt_vm.h 595 596 # Standard SMP options 597 SMP opt_global.h 598 599 # Size of the kernel message buffer 600 MSGBUF_SIZE opt_msgbuf.h 601 602 # NFS options 603 NFS_MINATTRTIMO opt_nfs.h 604 NFS_MAXATTRTIMO opt_nfs.h 605 NFS_MINDIRATTRTIMO opt_nfs.h 606 NFS_MAXDIRATTRTIMO opt_nfs.h 607 NFS_GATHERDELAY opt_nfs.h 608 NFS_WDELAYHASHSIZ opt_nfs.h 609 NFS_DEBUG opt_nfs.h 610 611 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 612 OVERRIDE_CARD opt_bktr.h 613 OVERRIDE_TUNER opt_bktr.h 614 OVERRIDE_DBX opt_bktr.h 615 OVERRIDE_MSP opt_bktr.h 616 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 617 BROOKTREE_ALLOC_PAGES opt_bktr.h 618 BKTR_OVERRIDE_CARD opt_bktr.h 619 BKTR_OVERRIDE_TUNER opt_bktr.h 620 BKTR_OVERRIDE_DBX opt_bktr.h 621 BKTR_OVERRIDE_MSP opt_bktr.h 622 BKTR_SYSTEM_DEFAULT opt_bktr.h 623 BKTR_ALLOC_PAGES opt_bktr.h 624 BKTR_USE_PLL opt_bktr.h 625 BKTR_GPIO_ACCESS opt_bktr.h 626 BKTR_NO_MSP_RESET opt_bktr.h 627 BKTR_430_FX_MODE opt_bktr.h 628 BKTR_SIS_VIA_MODE opt_bktr.h 629 BKTR_USE_FREEBSD_SMBUS opt_bktr.h 630 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 631 632 BREAK_TO_DEBUGGER opt_comconsole.h 633 ALT_BREAK_TO_DEBUGGER opt_comconsole.h 634 635 # Options to support PPS 636 UART_PPS_ON_CTS opt_uart.h 637 638 # options for bus/device framework 639 BUS_DEBUG opt_bus.h 640 641 # options for USB support 642 USB_DEBUG opt_usb.h 643 USB_REQ_DEBUG opt_usb.h 644 USB_VERBOSE opt_usb.h 645 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 646 U3G_DEBUG opt_u3g.h 647 UKBD_DFLT_KEYMAP opt_ukbd.h 648 UPLCOM_INTR_INTERVAL opt_uplcom.h 649 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 650 UVSCOM_INTR_INTERVAL opt_uvscom.h 651 652 # Embedded system options 653 INIT_PATH 654 655 ROOTDEVNAME 656 657 FDC_DEBUG opt_fdc.h 658 PCFCLOCK_VERBOSE opt_pcfclock.h 659 PCFCLOCK_MAX_RETRIES opt_pcfclock.h 660 661 KTR opt_global.h 662 KTR_ALQ opt_ktr.h 663 KTR_MASK opt_ktr.h 664 KTR_CPUMASK opt_ktr.h 665 KTR_COMPILE opt_global.h 666 KTR_ENTRIES opt_global.h 667 KTR_VERBOSE opt_ktr.h 668 WITNESS opt_global.h 669 WITNESS_KDB opt_witness.h 670 WITNESS_SKIPSPIN opt_witness.h 671 672 # options for ACPI support 673 ACPI_DEBUG opt_acpi.h 674 ACPI_MAX_TASKS opt_acpi.h 675 ACPI_MAX_THREADS opt_acpi.h 676 677 # ISA support 678 DEV_ISA opt_isa.h 679 ISAPNP opt_isa.h 680 681 # various 'device presence' options. 682 DEV_BPF opt_bpf.h 683 DEV_NETMAP opt_global.h 684 DEV_MCA opt_mca.h 685 DEV_CARP opt_carp.h 686 DEV_PTY opt_tty.h 687 DEV_SPLASH opt_splash.h 688 689 # EISA support 690 DEV_EISA opt_eisa.h 691 EISA_SLOTS opt_eisa.h 692 693 # ed driver 694 ED_HPP opt_ed.h 695 ED_3C503 opt_ed.h 696 ED_SIC opt_ed.h 697 698 # bce driver 699 BCE_DEBUG opt_bce.h 700 BCE_NVRAM_WRITE_SUPPORT opt_bce.h 701 702 SOCKBUF_DEBUG opt_global.h 703 704 # options for ubsec driver 705 UBSEC_DEBUG opt_ubsec.h 706 UBSEC_RNDTEST opt_ubsec.h 707 UBSEC_NO_RNG opt_ubsec.h 708 709 # options for hifn driver 710 HIFN_DEBUG opt_hifn.h 711 HIFN_RNDTEST opt_hifn.h 712 713 # options for safenet driver 714 SAFE_DEBUG opt_safe.h 715 SAFE_NO_RNG opt_safe.h 716 SAFE_RNDTEST opt_safe.h 717 718 # syscons options 719 MAXCONS opt_syscons.h 720 SC_ALT_MOUSE_IMAGE opt_syscons.h 721 SC_CUT_SPACES2TABS opt_syscons.h 722 SC_CUT_SEPCHARS opt_syscons.h 723 SC_DEBUG_LEVEL opt_syscons.h 724 SC_DFLT_FONT opt_syscons.h 725 SC_DISABLE_KDBKEY opt_syscons.h 726 SC_DISABLE_REBOOT opt_syscons.h 727 SC_HISTORY_SIZE opt_syscons.h 728 SC_KERNEL_CONS_ATTR opt_syscons.h 729 SC_KERNEL_CONS_REV_ATTR opt_syscons.h 730 SC_MOUSE_CHAR opt_syscons.h 731 SC_NO_CUTPASTE opt_syscons.h 732 SC_NO_FONT_LOADING opt_syscons.h 733 SC_NO_HISTORY opt_syscons.h 734 SC_NO_MODE_CHANGE opt_syscons.h 735 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 736 SC_NO_SYSMOUSE opt_syscons.h 737 SC_NORM_ATTR opt_syscons.h 738 SC_NORM_REV_ATTR opt_syscons.h 739 SC_PIXEL_MODE opt_syscons.h 740 SC_RENDER_DEBUG opt_syscons.h 741 SC_TWOBUTTON_MOUSE opt_syscons.h 742 743 # teken terminal emulator options 744 TEKEN_UTF8 opt_teken.h 745 TEKEN_XTERM opt_teken.h 746 747 # options for printf 748 PRINTF_BUFR_SIZE opt_printf.h 749 750 # kbd options 751 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 752 KBD_INSTALL_CDEV opt_kbd.h 753 KBD_MAXRETRY opt_kbd.h 754 KBD_MAXWAIT opt_kbd.h 755 KBD_RESETDELAY opt_kbd.h 756 KBDIO_DEBUG opt_kbd.h 757 758 # options for the Atheros driver 759 ATH_DEBUG opt_ath.h 760 ATH_TXBUF opt_ath.h 761 ATH_RXBUF opt_ath.h 762 ATH_DIAGAPI opt_ath.h 763 ATH_TX99_DIAG opt_ath.h 764 765 # options for the Atheros hal 766 AH_SUPPORT_AR5416 opt_ah.h 767 768 AH_DEBUG opt_ah.h 769 AH_ASSERT opt_ah.h 770 AH_DEBUG_ALQ opt_ah.h 771 AH_REGOPS_FUNC opt_ah.h 772 AH_WRITE_REGDOMAIN opt_ah.h 773 AH_DEBUG_COUNTRY opt_ah.h 774 AH_WRITE_EEPROM opt_ah.h 775 AH_PRIVATE_DIAG opt_ah.h 776 AH_NEED_DESC_SWAP opt_ah.h 777 AH_USE_INIPDGAIN opt_ah.h 778 AH_MAXCHAN opt_ah.h 779 780 # options for the Broadcom BCM43xx driver (bwi) 781 BWI_DEBUG opt_bwi.h 782 BWI_DEBUG_VERBOSE opt_bwi.h 783 784 # options for the Marvell 8335 wireless driver 785 MALO_DEBUG opt_malo.h 786 MALO_TXBUF opt_malo.h 787 MALO_RXBUF opt_malo.h 788 789 # options for the Marvell wireless driver 790 MWL_DEBUG opt_mwl.h 791 MWL_TXBUF opt_mwl.h 792 MWL_RXBUF opt_mwl.h 793 MWL_DIAGAPI opt_mwl.h 794 MWL_AGGR_SIZE opt_mwl.h 795 MWL_TX_NODROP opt_mwl.h 796 797 # dcons options 798 DCONS_BUF_SIZE opt_dcons.h 799 DCONS_POLL_HZ opt_dcons.h 800 DCONS_FORCE_CONSOLE opt_dcons.h 801 DCONS_FORCE_GDB opt_dcons.h 802 803 # HWPMC options 804 HWPMC_HOOKS 805 806 # XBOX options for FreeBSD/i386, but some files are MI 807 XBOX opt_xbox.h 808 809 # XFS 810 XFS 811 812 # Interrupt filtering 813 INTR_FILTER 814 815 # 802.11 support layer 816 IEEE80211_DEBUG opt_wlan.h 817 IEEE80211_DEBUG_REFCNT opt_wlan.h 818 IEEE80211_AMPDU_AGE opt_wlan.h 819 IEEE80211_SUPPORT_MESH opt_wlan.h 820 IEEE80211_SUPPORT_SUPERG opt_wlan.h 821 IEEE80211_SUPPORT_TDMA opt_wlan.h 822 823 # 802.11 TDMA support 824 TDMA_SLOTLEN_DEFAULT opt_tdma.h 825 TDMA_SLOTCNT_DEFAULT opt_tdma.h 826 TDMA_BINTVAL_DEFAULT opt_tdma.h 827 TDMA_TXRATE_11B_DEFAULT opt_tdma.h 828 TDMA_TXRATE_11G_DEFAULT opt_tdma.h 829 TDMA_TXRATE_11A_DEFAULT opt_tdma.h 830 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 831 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 832 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 833 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 834 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 835 836 # Network stack virtualization options 837 VIMAGE opt_global.h 838 VNET_DEBUG opt_global.h 839 840 # Common Flash Interface (CFI) options 841 CFI_SUPPORT_STRATAFLASH opt_cfi.h 842 CFI_ARMEDANDDANGEROUS opt_cfi.h 843 844 # Sound options 845 SND_DEBUG opt_snd.h 846 SND_DIAGNOSTIC opt_snd.h 847 SND_FEEDER_MULTIFORMAT opt_snd.h 848 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 849 SND_FEEDER_RATE_HP opt_snd.h 850 SND_PCM_64 opt_snd.h 851 SND_OLDSTEREO opt_snd.h 852 853 X86BIOS

Cache object: d068a33dbf76f1f3c6e1635c218cafea

FreeBSD/Linux Kernel Cross Reference sys/conf/options

FreeBSD/Linux Kernel Cross Reference
sys/conf/options