FreeBSD/Linux Kernel Cross Reference
sys/conf/options
1 # $FreeBSD: releng/9.0/sys/conf/options 225448 2011-09-08 12:56:26Z attilio $
2 #
3 # On the handling of kernel options
4 #
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 AAC_DEBUG opt_aac.h
34 AHC_ALLOW_MEMIO opt_aic7xxx.h
35 AHC_TMODE_ENABLE opt_aic7xxx.h
36 AHC_DUMP_EEPROM opt_aic7xxx.h
37 AHC_DEBUG opt_aic7xxx.h
38 AHC_DEBUG_OPTS opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40 AHD_DEBUG opt_aic79xx.h
41 AHD_DEBUG_OPTS opt_aic79xx.h
42 AHD_TMODE_ENABLE opt_aic79xx.h
43 AHD_REG_PRETTY_PRINT opt_aic79xx.h
44 ADW_ALLOW_MEMIO opt_adw.h
45
46 TWA_DEBUG opt_twa.h
47 TWA_FLASH_FIRMWARE opt_twa.h
48
49 # Debugging options.
50 ALT_BREAK_TO_DEBUGGER opt_kdb.h
51 BREAK_TO_DEBUGGER opt_kdb.h
52 DDB
53 DDB_BUFR_SIZE opt_ddb.h
54 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
55 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
56 DDB_CTF opt_ddb.h
57 DDB_NUMSYM opt_ddb.h
58 GDB
59 KDB opt_global.h
60 KDB_TRACE opt_kdb.h
61 KDB_UNATTENDED opt_kdb.h
62 SYSCTL_DEBUG opt_sysctl.h
63
64 # Miscellaneous options.
65 ADAPTIVE_LOCKMGRS
66 ALQ
67 AUDIT opt_global.h
68 CAPABILITIES opt_capsicum.h
69 CAPABILITY_MODE opt_capsicum.h
70 CODA_COMPAT_5 opt_coda.h
71 COMPAT_43 opt_compat.h
72 COMPAT_43TTY opt_compat.h
73 COMPAT_FREEBSD4 opt_compat.h
74 COMPAT_FREEBSD5 opt_compat.h
75 COMPAT_FREEBSD6 opt_compat.h
76 COMPAT_FREEBSD7 opt_compat.h
77 COMPILING_LINT opt_global.h
78 COMPRESS_USER_CORES opt_core.h
79 CY_PCI_FASTINTR
80 DEADLKRES opt_watchdog.h
81 DIRECTIO
82 FULL_PREEMPTION opt_sched.h
83 IPI_PREEMPTION opt_sched.h
84 GEOM_AES opt_geom.h
85 GEOM_BDE opt_geom.h
86 GEOM_BSD opt_geom.h
87 GEOM_CACHE opt_geom.h
88 GEOM_CONCAT opt_geom.h
89 GEOM_ELI opt_geom.h
90 GEOM_FOX opt_geom.h
91 GEOM_GATE opt_geom.h
92 GEOM_JOURNAL opt_geom.h
93 GEOM_LABEL opt_geom.h
94 GEOM_LINUX_LVM opt_geom.h
95 GEOM_MBR opt_geom.h
96 GEOM_MIRROR opt_geom.h
97 GEOM_MULTIPATH opt_geom.h
98 GEOM_NOP opt_geom.h
99 GEOM_PART_APM opt_geom.h
100 GEOM_PART_BSD opt_geom.h
101 GEOM_PART_EBR opt_geom.h
102 GEOM_PART_EBR_COMPAT opt_geom.h
103 GEOM_PART_GPT opt_geom.h
104 GEOM_PART_MBR opt_geom.h
105 GEOM_PART_PC98 opt_geom.h
106 GEOM_PART_VTOC8 opt_geom.h
107 GEOM_PC98 opt_geom.h
108 GEOM_RAID opt_geom.h
109 GEOM_RAID3 opt_geom.h
110 GEOM_SHSEC opt_geom.h
111 GEOM_STRIPE opt_geom.h
112 GEOM_SUNLABEL opt_geom.h
113 GEOM_UZIP opt_geom.h
114 GEOM_VIRSTOR opt_geom.h
115 GEOM_VOL opt_geom.h
116 GEOM_ZERO opt_geom.h
117 KDTRACE_HOOKS opt_kdtrace.h
118 KSTACK_MAX_PAGES
119 KSTACK_PAGES
120 KTRACE
121 KTRACE_REQUEST_POOL opt_ktrace.h
122 LIBICONV
123 MAC opt_global.h
124 MAC_BIBA opt_dontuse.h
125 MAC_BSDEXTENDED opt_dontuse.h
126 MAC_IFOFF opt_dontuse.h
127 MAC_LOMAC opt_dontuse.h
128 MAC_MLS opt_dontuse.h
129 MAC_NONE opt_dontuse.h
130 MAC_PARTITION opt_dontuse.h
131 MAC_PORTACL opt_dontuse.h
132 MAC_SEEOTHERUIDS opt_dontuse.h
133 MAC_STATIC opt_mac.h
134 MAC_STUB opt_dontuse.h
135 MAC_TEST opt_dontuse.h
136 MD_ROOT opt_md.h
137 MD_ROOT_SIZE opt_md.h
138 MFI_DEBUG opt_mfi.h
139 MFI_DECODE_LOG opt_mfi.h
140 MPROF_BUFFERS opt_mprof.h
141 MPROF_HASH_SIZE opt_mprof.h
142 NEW_PCIB opt_global.h
143 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
144 NO_ADAPTIVE_RWLOCKS
145 NO_ADAPTIVE_SX
146 NO_SYSCTL_DESCR opt_global.h
147 NSWBUF_MIN opt_swap.h
148 MBUF_PACKET_ZONE_DISABLE opt_global.h
149 PANIC_REBOOT_WAIT_TIME opt_panic.h
150 PPC_DEBUG opt_ppc.h
151 PPC_PROBE_CHIPSET opt_ppc.h
152 PPS_SYNC opt_ntp.h
153 PREEMPTION opt_sched.h
154 PROCDESC opt_procdesc.h
155 QUOTA
156 SCHED_4BSD opt_sched.h
157 SCHED_STATS opt_sched.h
158 SCHED_ULE opt_sched.h
159 SLEEPQUEUE_PROFILING
160 SLHCI_DEBUG opt_slhci.h
161 SPX_HACK
162 STACK opt_stack.h
163 SUIDDIR
164 MSGMNB opt_sysvipc.h
165 MSGMNI opt_sysvipc.h
166 MSGSEG opt_sysvipc.h
167 MSGSSZ opt_sysvipc.h
168 MSGTQL opt_sysvipc.h
169 SEMMNI opt_sysvipc.h
170 SEMMNS opt_sysvipc.h
171 SEMMNU opt_sysvipc.h
172 SEMMSL opt_sysvipc.h
173 SEMOPM opt_sysvipc.h
174 SEMUME opt_sysvipc.h
175 SHMALL opt_sysvipc.h
176 SHMMAX opt_sysvipc.h
177 SHMMAXPGS opt_sysvipc.h
178 SHMMIN opt_sysvipc.h
179 SHMMNI opt_sysvipc.h
180 SHMSEG opt_sysvipc.h
181 SYSVMSG opt_sysvipc.h
182 SYSVSEM opt_sysvipc.h
183 SYSVSHM opt_sysvipc.h
184 SW_WATCHDOG opt_watchdog.h
185 TURNSTILE_PROFILING
186 VFS_AIO
187 VERBOSE_SYSINIT opt_global.h
188 WLCACHE opt_wavelan.h
189 WLDEBUG opt_wavelan.h
190
191 # POSIX kernel options
192 P1003_1B_MQUEUE opt_posix.h
193 P1003_1B_SEMAPHORES opt_posix.h
194 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
195
196 # Do we want the config file compiled into the kernel?
197 INCLUDE_CONFIG_FILE opt_config.h
198
199 # Options for static filesystems. These should only be used at config
200 # time, since the corresponding lkms cannot work if there are any static
201 # dependencies. Unusability is enforced by hiding the defines for the
202 # options in a never-included header.
203 CD9660 opt_dontuse.h
204 CODA opt_dontuse.h
205 EXT2FS opt_dontuse.h
206 FDESCFS opt_dontuse.h
207 FFS opt_dontuse.h
208 HPFS opt_dontuse.h
209 MSDOSFS opt_dontuse.h
210 NTFS opt_dontuse.h
211 NULLFS opt_dontuse.h
212 NWFS opt_dontuse.h
213 PORTALFS opt_dontuse.h
214 PROCFS opt_dontuse.h
215 PSEUDOFS opt_dontuse.h
216 REISERFS opt_dontuse.h
217 SMBFS opt_dontuse.h
218 TMPFS opt_dontuse.h
219 UDF opt_dontuse.h
220 UNIONFS opt_dontuse.h
221
222 # Pseudofs debugging
223 PSEUDOFS_TRACE opt_pseudofs.h
224
225 # In-kernel GSS-API
226 KGSSAPI opt_kgssapi.h
227 KGSSAPI_DEBUG opt_kgssapi.h
228
229 # These static filesystems have one slightly bogus static dependency in
230 # sys/i386/i386/autoconf.c. If any of these filesystems are
231 # statically compiled into the kernel, code for mounting them as root
232 # filesystems will be enabled - but look below.
233 NFSCLIENT opt_nfs.h
234 NFSSERVER opt_nfs.h
235
236 # Use these options to compile the experimental nfs client and/or
237 # server that supports NFSv4 into a kernel.
238 # NFSCL - client
239 # NFSD - server
240 NFSCL opt_nfs.h
241 NFSD opt_nfs.h
242
243 # filesystems and libiconv bridge
244 CD9660_ICONV opt_dontuse.h
245 MSDOSFS_ICONV opt_dontuse.h
246 NTFS_ICONV opt_dontuse.h
247 UDF_ICONV opt_dontuse.h
248
249 # If you are following the conditions in the copyright,
250 # you can enable soft-updates which will speed up a lot of thigs
251 # and make the system safer from crashes at the same time.
252 # otherwise a STUB module will be compiled in.
253 SOFTUPDATES opt_ffs.h
254
255 # On small, embedded systems, it can be useful to turn off support for
256 # snapshots. It saves about 30-40k for a feature that would be lightly
257 # used, if it is used at all.
258 NO_FFS_SNAPSHOT opt_ffs.h
259
260 # Enabling this option turns on support for Access Control Lists in UFS,
261 # which can be used to support high security configurations. Depends on
262 # UFS_EXTATTR.
263 UFS_ACL opt_ufs.h
264
265 # Enabling this option turns on support for extended attributes in UFS-based
266 # filesystems, which can be used to support high security configurations
267 # as well as new filesystem features.
268 UFS_EXTATTR opt_ufs.h
269 UFS_EXTATTR_AUTOSTART opt_ufs.h
270
271 # Enable fast hash lookups for large directories on UFS-based filesystems.
272 UFS_DIRHASH opt_ufs.h
273
274 # Enable gjournal-based UFS journal.
275 UFS_GJOURNAL opt_ufs.h
276
277 # The below sentence is not in English, and neither is this one.
278 # We plan to remove the static dependences above, with a
279 # <filesystem>_ROOT option to control if it usable as root. This list
280 # allows these options to be present in config files already (though
281 # they won't make any difference yet).
282 NFS_ROOT opt_nfsroot.h
283
284 # SMB/CIFS requester
285 NETSMB opt_netsmb.h
286
287 # Options used only in subr_param.c.
288 HZ opt_param.h
289 MAXFILES opt_param.h
290 NBUF opt_param.h
291 NSFBUFS opt_param.h
292 VM_BCACHE_SIZE_MAX opt_param.h
293 VM_SWZONE_SIZE_MAX opt_param.h
294 MAXUSERS
295 DFLDSIZ opt_param.h
296 MAXDSIZ opt_param.h
297 MAXSSIZ opt_param.h
298
299 # Generic SCSI options.
300 CAM_MAX_HIGHPOWER opt_cam.h
301 CAMDEBUG opt_cam.h
302 CAM_DEBUG_DELAY opt_cam.h
303 CAM_DEBUG_BUS opt_cam.h
304 CAM_DEBUG_TARGET opt_cam.h
305 CAM_DEBUG_LUN opt_cam.h
306 CAM_DEBUG_FLAGS opt_cam.h
307 SCSI_DELAY opt_scsi.h
308 SCSI_NO_SENSE_STRINGS opt_scsi.h
309 SCSI_NO_OP_STRINGS opt_scsi.h
310
311 # Options used only in cam/ata/ata_da.c
312 ADA_TEST_FAILURE opt_ada.h
313
314 # Options used only in cam/scsi/scsi_cd.c
315 CHANGER_MIN_BUSY_SECONDS opt_cd.h
316 CHANGER_MAX_BUSY_SECONDS opt_cd.h
317
318 # Options used only in cam/scsi/scsi_sa.c.
319 SA_IO_TIMEOUT opt_sa.h
320 SA_SPACE_TIMEOUT opt_sa.h
321 SA_REWIND_TIMEOUT opt_sa.h
322 SA_ERASE_TIMEOUT opt_sa.h
323 SA_1FM_AT_EOD opt_sa.h
324
325 # Options used only in cam/scsi/scsi_pt.c
326 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
327
328 # Options used only in cam/scsi/scsi_ses.c
329 SES_ENABLE_PASSTHROUGH opt_ses.h
330
331 # Options used in dev/sym/ (Symbios SCSI driver).
332 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
333 # Allows the ncr to take precedence
334 # 1 (1<<0) -> 810a, 860
335 # 2 (1<<1) -> 825a, 875, 885, 895
336 # 4 (1<<2) -> 895a, 896, 1510d
337 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
338 # disabled:0 (default), enabled:1
339 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
340 # disabled:0, enabled:1 (default)
341 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
342 # default:8, range:[1..64]
343
344 # Options used only in pci/ncr.c
345 SCSI_NCR_DEBUG opt_ncr.h
346 SCSI_NCR_MAX_SYNC opt_ncr.h
347 SCSI_NCR_MAX_WIDE opt_ncr.h
348 SCSI_NCR_MYADDR opt_ncr.h
349
350 # Options used only in dev/isp/*
351 ISP_TARGET_MODE opt_isp.h
352 ISP_FW_CRASH_DUMP opt_isp.h
353 ISP_DEFAULT_ROLES opt_isp.h
354 ISP_INTERNAL_TARGET opt_isp.h
355
356 # Options used only in dev/iscsi
357 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
358
359 # Options used in the 'ata' ATA/ATAPI driver
360 ATA_STATIC_ID opt_ata.h
361 ATA_NOPCI opt_ata.h
362 ATA_REQUEST_TIMEOUT opt_ata.h
363 ATA_CAM opt_ata.h
364
365 # Net stuff.
366 ACCEPT_FILTER_DATA
367 ACCEPT_FILTER_DNS
368 ACCEPT_FILTER_HTTP
369 ALTQ opt_global.h
370 ALTQ_CBQ opt_altq.h
371 ALTQ_CDNR opt_altq.h
372 ALTQ_DEBUG opt_altq.h
373 ALTQ_HFSC opt_altq.h
374 ALTQ_NOPCC opt_altq.h
375 ALTQ_PRIQ opt_altq.h
376 ALTQ_RED opt_altq.h
377 ALTQ_RIO opt_altq.h
378 BOOTP opt_bootp.h
379 BOOTP_BLOCKSIZE opt_bootp.h
380 BOOTP_COMPAT opt_bootp.h
381 BOOTP_NFSROOT opt_bootp.h
382 BOOTP_NFSV3 opt_bootp.h
383 BOOTP_WIRED_TO opt_bootp.h
384 DEVICE_POLLING
385 DEV_ENC opt_enc.h
386 DEV_PF opt_pf.h
387 DEV_PFLOG opt_pf.h
388 DEV_PFSYNC opt_pf.h
389 DEV_VLAN opt_vlan.h
390 DUMMYNET opt_ipdn.h
391 ETHER_8022 opt_ef.h
392 ETHER_8023 opt_ef.h
393 ETHER_II opt_ef.h
394 ETHER_SNAP opt_ef.h
395 INET opt_inet.h
396 INET6 opt_inet6.h
397 IPDIVERT
398 IPFILTER opt_ipfilter.h
399 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
400 IPFILTER_LOG opt_ipfilter.h
401 IPFILTER_LOOKUP opt_ipfilter.h
402 IPFIREWALL opt_ipfw.h
403 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
404 IPFIREWALL_FORWARD opt_ipfw.h
405 IPFIREWALL_NAT opt_ipfw.h
406 IPFIREWALL_VERBOSE opt_ipfw.h
407 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
408 IPSEC opt_ipsec.h
409 IPSEC_DEBUG opt_ipsec.h
410 IPSEC_FILTERTUNNEL opt_ipsec.h
411 IPSEC_NAT_T opt_ipsec.h
412 IPSTEALTH
413 IPX
414 KRPC
415 LIBALIAS
416 LIBMBPOOL
417 LIBMCHAIN
418 MBUF_PROFILING
419 MBUF_STRESS_TEST
420 MROUTING opt_mrouting.h
421 NCP
422 NETATALK opt_atalk.h
423 NFSLOCKD
424 PCBGROUP opt_pcbgroup.h
425 RADIX_MPATH opt_mpath.h
426 ROUTETABLES opt_route.h
427 SLIP_IFF_OPTS opt_slip.h
428 TCPDEBUG
429 TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading
430 TCP_SIGNATURE opt_inet.h
431 VLAN_ARRAY opt_vlan.h
432 XBONEHACK
433 FLOWTABLE opt_route.h
434
435 #
436 # SCTP
437 #
438 SCTP opt_sctp.h
439 SCTP_DEBUG opt_sctp.h # Enable debug printfs
440 SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
441 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
442 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
443 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
444 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
445 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
446 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
447 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
448 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
449 #
450 #
451 #
452
453 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
454 # Each netgraph node type can be either be compiled into the kernel
455 # or loaded dynamically. To get the former, include the corresponding
456 # option below. Each type has its own man page, e.g. ng_async(4).
457 NETGRAPH
458 NETGRAPH_DEBUG opt_netgraph.h
459 NETGRAPH_ASYNC opt_netgraph.h
460 NETGRAPH_ATMLLC opt_netgraph.h
461 NETGRAPH_ATM_ATMPIF opt_netgraph.h
462 NETGRAPH_BLUETOOTH opt_netgraph.h
463 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
464 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
465 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
466 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
467 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
468 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
469 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
470 NETGRAPH_BPF opt_netgraph.h
471 NETGRAPH_BRIDGE opt_netgraph.h
472 NETGRAPH_CAR opt_netgraph.h
473 NETGRAPH_CISCO opt_netgraph.h
474 NETGRAPH_DEFLATE opt_netgraph.h
475 NETGRAPH_DEVICE opt_netgraph.h
476 NETGRAPH_ECHO opt_netgraph.h
477 NETGRAPH_EIFACE opt_netgraph.h
478 NETGRAPH_ETHER opt_netgraph.h
479 NETGRAPH_ETHER_ECHO opt_netgraph.h
480 NETGRAPH_FEC opt_netgraph.h
481 NETGRAPH_FRAME_RELAY opt_netgraph.h
482 NETGRAPH_GIF opt_netgraph.h
483 NETGRAPH_GIF_DEMUX opt_netgraph.h
484 NETGRAPH_HOLE opt_netgraph.h
485 NETGRAPH_IFACE opt_netgraph.h
486 NETGRAPH_IP_INPUT opt_netgraph.h
487 NETGRAPH_IPFW opt_netgraph.h
488 NETGRAPH_KSOCKET opt_netgraph.h
489 NETGRAPH_L2TP opt_netgraph.h
490 NETGRAPH_LMI opt_netgraph.h
491 # MPPC compression requires proprietary files (not included)
492 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
493 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
494 NETGRAPH_NAT opt_netgraph.h
495 NETGRAPH_NETFLOW opt_netgraph.h
496 NETGRAPH_ONE2MANY opt_netgraph.h
497 NETGRAPH_PATCH opt_netgraph.h
498 NETGRAPH_PIPE opt_netgraph.h
499 NETGRAPH_PPP opt_netgraph.h
500 NETGRAPH_PPPOE opt_netgraph.h
501 NETGRAPH_PPTPGRE opt_netgraph.h
502 NETGRAPH_PRED1 opt_netgraph.h
503 NETGRAPH_RFC1490 opt_netgraph.h
504 NETGRAPH_SOCKET opt_netgraph.h
505 NETGRAPH_SPLIT opt_netgraph.h
506 NETGRAPH_SPPP opt_netgraph.h
507 NETGRAPH_TAG opt_netgraph.h
508 NETGRAPH_TCPMSS opt_netgraph.h
509 NETGRAPH_TEE opt_netgraph.h
510 NETGRAPH_TTY opt_netgraph.h
511 NETGRAPH_UI opt_netgraph.h
512 NETGRAPH_VJC opt_netgraph.h
513 NETGRAPH_VLAN opt_netgraph.h
514
515 # NgATM options
516 NGATM_ATM opt_netgraph.h
517 NGATM_ATMBASE opt_netgraph.h
518 NGATM_SSCOP opt_netgraph.h
519 NGATM_SSCFU opt_netgraph.h
520 NGATM_UNI opt_netgraph.h
521 NGATM_CCATM opt_netgraph.h
522
523 # DRM options
524 DRM_DEBUG opt_drm.h
525
526 ZERO_COPY_SOCKETS opt_zero.h
527 TI_PRIVATE_JUMBOS opt_ti.h
528 TI_JUMBO_HDRSPLIT opt_ti.h
529 BCE_JUMBO_HDRSPLIT opt_bce.h
530
531 # XXX Conflict: # of devices vs network protocol (Native ATM).
532 # This makes "atm.h" unusable.
533 NATM
534
535 # DPT driver debug flags
536 DPT_MEASURE_PERFORMANCE opt_dpt.h
537 DPT_HANDLE_TIMEOUTS opt_dpt.h
538 DPT_TIMEOUT_FACTOR opt_dpt.h
539 DPT_LOST_IRQ opt_dpt.h
540 DPT_RESET_HBA opt_dpt.h
541
542 # Misc debug flags. Most of these should probably be replaced with
543 # 'DEBUG', and then let people recompile just the interesting modules
544 # with 'make CC="cc -DDEBUG"'.
545 CLUSTERDEBUG opt_debug_cluster.h
546 DEBUG_1284 opt_ppb_1284.h
547 VP0_DEBUG opt_vpo.h
548 LPT_DEBUG opt_lpt.h
549 PLIP_DEBUG opt_plip.h
550 LOCKF_DEBUG opt_debug_lockf.h
551 NETATALKDEBUG opt_atalk.h
552 SI_DEBUG opt_debug_si.h
553
554 # Fb options
555 FB_DEBUG opt_fb.h
556 FB_INSTALL_CDEV opt_fb.h
557
558 # ppbus related options
559 PERIPH_1284 opt_ppb_1284.h
560 DONTPROBE_1284 opt_ppb_1284.h
561
562 # smbus related options
563 ENABLE_ALART opt_intpm.h
564
565 # These cause changes all over the kernel
566 BLKDEV_IOSIZE opt_global.h
567 BURN_BRIDGES opt_global.h
568 DEBUG opt_global.h
569 DEBUG_LOCKS opt_global.h
570 DEBUG_VFS_LOCKS opt_global.h
571 DFLTPHYS opt_global.h
572 DIAGNOSTIC opt_global.h
573 INVARIANT_SUPPORT opt_global.h
574 INVARIANTS opt_global.h
575 MAXCPU opt_global.h
576 MAXPHYS opt_global.h
577 MCLSHIFT opt_global.h
578 MUTEX_DEBUG opt_global.h
579 MUTEX_NOINLINE opt_global.h
580 LOCK_PROFILING opt_global.h
581 LOCK_PROFILING_FAST opt_global.h
582 MSIZE opt_global.h
583 REGRESSION opt_global.h
584 RWLOCK_NOINLINE opt_global.h
585 SX_NOINLINE opt_global.h
586 VFS_BIO_DEBUG opt_global.h
587
588 # These are VM related options
589 VM_KMEM_SIZE opt_vm.h
590 VM_KMEM_SIZE_SCALE opt_vm.h
591 VM_KMEM_SIZE_MAX opt_vm.h
592 VM_NRESERVLEVEL opt_vm.h
593 VM_LEVEL_0_ORDER opt_vm.h
594 NO_SWAPPING opt_vm.h
595 MALLOC_MAKE_FAILURES opt_vm.h
596 MALLOC_PROFILE opt_vm.h
597 MALLOC_DEBUG_MAXZONES opt_vm.h
598
599 # The MemGuard replacement allocator used for tamper-after-free detection
600 DEBUG_MEMGUARD opt_vm.h
601
602 # The RedZone malloc(9) protection
603 DEBUG_REDZONE opt_vm.h
604
605 # Standard SMP options
606 SMP opt_global.h
607
608 # Size of the kernel message buffer
609 MSGBUF_SIZE opt_msgbuf.h
610
611 # NFS options
612 NFS_MINATTRTIMO opt_nfs.h
613 NFS_MAXATTRTIMO opt_nfs.h
614 NFS_MINDIRATTRTIMO opt_nfs.h
615 NFS_MAXDIRATTRTIMO opt_nfs.h
616 NFS_GATHERDELAY opt_nfs.h
617 NFS_WDELAYHASHSIZ opt_nfs.h
618 NFS_DEBUG opt_nfs.h
619
620 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
621 OVERRIDE_CARD opt_bktr.h
622 OVERRIDE_TUNER opt_bktr.h
623 OVERRIDE_DBX opt_bktr.h
624 OVERRIDE_MSP opt_bktr.h
625 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
626 BROOKTREE_ALLOC_PAGES opt_bktr.h
627 BKTR_OVERRIDE_CARD opt_bktr.h
628 BKTR_OVERRIDE_TUNER opt_bktr.h
629 BKTR_OVERRIDE_DBX opt_bktr.h
630 BKTR_OVERRIDE_MSP opt_bktr.h
631 BKTR_SYSTEM_DEFAULT opt_bktr.h
632 BKTR_ALLOC_PAGES opt_bktr.h
633 BKTR_USE_PLL opt_bktr.h
634 BKTR_GPIO_ACCESS opt_bktr.h
635 BKTR_NO_MSP_RESET opt_bktr.h
636 BKTR_430_FX_MODE opt_bktr.h
637 BKTR_SIS_VIA_MODE opt_bktr.h
638 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
639 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
640
641 # Options to support PPS
642 UART_PPS_ON_CTS opt_uart.h
643
644 # options for bus/device framework
645 BUS_DEBUG opt_bus.h
646
647 # options for USB support
648 USB_DEBUG opt_usb.h
649 USB_HOST_ALIGN opt_usb.h
650 USB_REQ_DEBUG opt_usb.h
651 USB_VERBOSE opt_usb.h
652 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
653 U3G_DEBUG opt_u3g.h
654 UKBD_DFLT_KEYMAP opt_ukbd.h
655 UPLCOM_INTR_INTERVAL opt_uplcom.h
656 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
657 UVSCOM_INTR_INTERVAL opt_uvscom.h
658
659 # Embedded system options
660 INIT_PATH
661
662 ROOTDEVNAME
663
664 FDC_DEBUG opt_fdc.h
665 PCFCLOCK_VERBOSE opt_pcfclock.h
666 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
667
668 KTR opt_global.h
669 KTR_ALQ opt_ktr.h
670 KTR_MASK opt_ktr.h
671 KTR_CPUMASK opt_ktr.h
672 KTR_COMPILE opt_global.h
673 KTR_ENTRIES opt_global.h
674 KTR_VERBOSE opt_ktr.h
675 WITNESS opt_global.h
676 WITNESS_KDB opt_witness.h
677 WITNESS_SKIPSPIN opt_witness.h
678
679 # options for ACPI support
680 ACPI_DEBUG opt_acpi.h
681 ACPI_MAX_TASKS opt_acpi.h
682 ACPI_MAX_THREADS opt_acpi.h
683
684 # ISA support
685 DEV_ISA opt_isa.h
686 ISAPNP opt_isa.h
687
688 # various 'device presence' options.
689 DEV_BPF opt_bpf.h
690 DEV_MCA opt_mca.h
691 DEV_CARP opt_carp.h
692 DEV_SPLASH opt_splash.h
693
694 # EISA support
695 DEV_EISA opt_eisa.h
696 EISA_SLOTS opt_eisa.h
697
698 # ed driver
699 ED_HPP opt_ed.h
700 ED_3C503 opt_ed.h
701 ED_SIC opt_ed.h
702
703 # bce driver
704 BCE_DEBUG opt_bce.h
705 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
706
707 # bxe driver
708 BXE_DEBUG opt_bxe.h
709 BXE_NVRAM_WRITE_SUPPORT opt_bxe.h
710
711 SOCKBUF_DEBUG opt_global.h
712
713
714 # options for ubsec driver
715 UBSEC_DEBUG opt_ubsec.h
716 UBSEC_RNDTEST opt_ubsec.h
717 UBSEC_NO_RNG opt_ubsec.h
718
719 # options for hifn driver
720 HIFN_DEBUG opt_hifn.h
721 HIFN_RNDTEST opt_hifn.h
722
723 # options for safenet driver
724 SAFE_DEBUG opt_safe.h
725 SAFE_NO_RNG opt_safe.h
726 SAFE_RNDTEST opt_safe.h
727
728 # syscons options
729 MAXCONS opt_syscons.h
730 SC_ALT_MOUSE_IMAGE opt_syscons.h
731 SC_CUT_SPACES2TABS opt_syscons.h
732 SC_CUT_SEPCHARS opt_syscons.h
733 SC_DEBUG_LEVEL opt_syscons.h
734 SC_DFLT_FONT opt_syscons.h
735 SC_DISABLE_KDBKEY opt_syscons.h
736 SC_DISABLE_REBOOT opt_syscons.h
737 SC_HISTORY_SIZE opt_syscons.h
738 SC_KERNEL_CONS_ATTR opt_syscons.h
739 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
740 SC_MOUSE_CHAR opt_syscons.h
741 SC_NO_CUTPASTE opt_syscons.h
742 SC_NO_FONT_LOADING opt_syscons.h
743 SC_NO_HISTORY opt_syscons.h
744 SC_NO_MODE_CHANGE opt_syscons.h
745 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
746 SC_NO_SYSMOUSE opt_syscons.h
747 SC_NORM_ATTR opt_syscons.h
748 SC_NORM_REV_ATTR opt_syscons.h
749 SC_PIXEL_MODE opt_syscons.h
750 SC_RENDER_DEBUG opt_syscons.h
751 SC_TWOBUTTON_MOUSE opt_syscons.h
752
753 # teken terminal emulator options
754 TEKEN_CONS25 opt_teken.h
755 TEKEN_UTF8 opt_teken.h
756
757 # options for printf
758 PRINTF_BUFR_SIZE opt_printf.h
759
760 # kbd options
761 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
762 KBD_INSTALL_CDEV opt_kbd.h
763 KBD_MAXRETRY opt_kbd.h
764 KBD_MAXWAIT opt_kbd.h
765 KBD_RESETDELAY opt_kbd.h
766 KBDIO_DEBUG opt_kbd.h
767
768 # options for the Atheros driver
769 ATH_DEBUG opt_ath.h
770 ATH_TXBUF opt_ath.h
771 ATH_RXBUF opt_ath.h
772 ATH_DIAGAPI opt_ath.h
773 ATH_TX99_DIAG opt_ath.h
774 ATH_ENABLE_11N opt_ath.h
775 ATH_ENABLE_DFS opt_ath.h
776
777 # options for the Atheros hal
778 AH_SUPPORT_AR5416 opt_ah.h
779 # XXX For now, this breaks non-AR9130 chipsets, so only use it
780 # XXX when actually targetting AR9130.
781 AH_SUPPORT_AR9130 opt_ah.h
782
783 AH_DEBUG opt_ah.h
784 AH_ASSERT opt_ah.h
785 AH_DEBUG_ALQ opt_ah.h
786 AH_REGOPS_FUNC opt_ah.h
787 AH_WRITE_REGDOMAIN opt_ah.h
788 AH_DEBUG_COUNTRY opt_ah.h
789 AH_WRITE_EEPROM opt_ah.h
790 AH_PRIVATE_DIAG opt_ah.h
791 AH_NEED_DESC_SWAP opt_ah.h
792 AH_USE_INIPDGAIN opt_ah.h
793 AH_MAXCHAN opt_ah.h
794 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
795
796 # AR5416 and later interrupt mitigation
797 # XXX do not use this for AR9130
798 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
799
800 # options for the Broadcom BCM43xx driver (bwi)
801 BWI_DEBUG opt_bwi.h
802 BWI_DEBUG_VERBOSE opt_bwi.h
803
804 # options for the Marvell 8335 wireless driver
805 MALO_DEBUG opt_malo.h
806 MALO_TXBUF opt_malo.h
807 MALO_RXBUF opt_malo.h
808
809 # options for the Marvell wireless driver
810 MWL_DEBUG opt_mwl.h
811 MWL_TXBUF opt_mwl.h
812 MWL_RXBUF opt_mwl.h
813 MWL_DIAGAPI opt_mwl.h
814 MWL_AGGR_SIZE opt_mwl.h
815 MWL_TX_NODROP opt_mwl.h
816
817 # dcons options
818 DCONS_BUF_SIZE opt_dcons.h
819 DCONS_POLL_HZ opt_dcons.h
820 DCONS_FORCE_CONSOLE opt_dcons.h
821 DCONS_FORCE_GDB opt_dcons.h
822
823 # HWPMC options
824 HWPMC_HOOKS
825
826 # XBOX options for FreeBSD/i386, but some files are MI
827 XBOX opt_xbox.h
828
829 # XFS
830 XFS
831
832 # Interrupt filtering
833 INTR_FILTER
834
835 # 802.11 support layer
836 IEEE80211_DEBUG opt_wlan.h
837 IEEE80211_DEBUG_REFCNT opt_wlan.h
838 IEEE80211_AMPDU_AGE opt_wlan.h
839 IEEE80211_SUPPORT_MESH opt_wlan.h
840 IEEE80211_SUPPORT_SUPERG opt_wlan.h
841 IEEE80211_SUPPORT_TDMA opt_wlan.h
842 IEEE80211_ALQ opt_wlan.h
843
844 # 802.11 TDMA support
845 TDMA_SLOTLEN_DEFAULT opt_tdma.h
846 TDMA_SLOTCNT_DEFAULT opt_tdma.h
847 TDMA_BINTVAL_DEFAULT opt_tdma.h
848 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
849 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
850 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
851 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
852 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
853 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
854 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
855 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
856
857 # Network stack virtualization options
858 VIMAGE opt_global.h
859 VNET_DEBUG opt_global.h
860
861 # Common Flash Interface (CFI) options
862 CFI_SUPPORT_STRATAFLASH opt_cfi.h
863 CFI_ARMEDANDDANGEROUS opt_cfi.h
864
865 # Sound options
866 SND_DEBUG opt_snd.h
867 SND_DIAGNOSTIC opt_snd.h
868 SND_FEEDER_MULTIFORMAT opt_snd.h
869 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
870 SND_FEEDER_RATE_HP opt_snd.h
871 SND_PCM_64 opt_snd.h
872 SND_OLDSTEREO opt_snd.h
873
874 X86BIOS
875
876 # Flattened device tree options
877 FDT opt_platform.h
878 FDT_DTB_STATIC opt_platform.h
879
880 # OFED Infiniband stack
881 OFED opt_ofed.h
882 OFED_DEBUG_INIT opt_ofed.h
883 SDP opt_ofed.h
884 SDP_DEBUG opt_ofed.h
885 IPOIB_DEBUG opt_ofed.h
886 IPOIB_CM opt_ofed.h
887
888 # Resource Accounting
889 RACCT opt_global.h
890
891 # Resource Limits
892 RCTL opt_global.h
893
894 # At least one of the AR71XX ubiquiti boards has a Redboot configuration
895 # that "lies" about the amount of RAM it has. Until a cleaner method is
896 # defined, this option will suffice in overriding what Redboot says.
897 AR71XX_REALMEM opt_global.h
898
Cache object: c5f0f149848a7ea6f9ab2ba08db78c7c
|