config.h

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
    2 /*
    3  * Copyright (C) 2012-2014, 2018-2019 Intel Corporation
    4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
    5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
    6  */
    7 #ifndef __iwl_fw_api_config_h__
    8 #define __iwl_fw_api_config_h__
    9 
   10 /*
   11  * struct iwl_dqa_enable_cmd
   12  * @cmd_queue: the TXQ number of the command queue
   13  */
   14 struct iwl_dqa_enable_cmd {
   15         __le32 cmd_queue;
   16 } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */
   17 
   18 /*
   19  * struct iwl_tx_ant_cfg_cmd
   20  * @valid: valid antenna configuration
   21  */
   22 struct iwl_tx_ant_cfg_cmd {
   23         __le32 valid;
   24 } __packed;
   25 
   26 /**
   27  * struct iwl_calib_ctrl - Calibration control struct.
   28  * Sent as part of the phy configuration command.
   29  * @flow_trigger: bitmap for which calibrations to perform according to
   30  *              flow triggers, using &enum iwl_calib_cfg
   31  * @event_trigger: bitmap for which calibrations to perform according to
   32  *              event triggers, using &enum iwl_calib_cfg
   33  */
   34 struct iwl_calib_ctrl {
   35         __le32 flow_trigger;
   36         __le32 event_trigger;
   37 } __packed;
   38 
   39 /* This enum defines the bitmap of various calibrations to enable in both
   40  * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
   41  */
   42 enum iwl_calib_cfg {
   43         IWL_CALIB_CFG_XTAL_IDX                  = BIT(0),
   44         IWL_CALIB_CFG_TEMPERATURE_IDX           = BIT(1),
   45         IWL_CALIB_CFG_VOLTAGE_READ_IDX          = BIT(2),
   46         IWL_CALIB_CFG_PAPD_IDX                  = BIT(3),
   47         IWL_CALIB_CFG_TX_PWR_IDX                = BIT(4),
   48         IWL_CALIB_CFG_DC_IDX                    = BIT(5),
   49         IWL_CALIB_CFG_BB_FILTER_IDX             = BIT(6),
   50         IWL_CALIB_CFG_LO_LEAKAGE_IDX            = BIT(7),
   51         IWL_CALIB_CFG_TX_IQ_IDX                 = BIT(8),
   52         IWL_CALIB_CFG_TX_IQ_SKEW_IDX            = BIT(9),
   53         IWL_CALIB_CFG_RX_IQ_IDX                 = BIT(10),
   54         IWL_CALIB_CFG_RX_IQ_SKEW_IDX            = BIT(11),
   55         IWL_CALIB_CFG_SENSITIVITY_IDX           = BIT(12),
   56         IWL_CALIB_CFG_CHAIN_NOISE_IDX           = BIT(13),
   57         IWL_CALIB_CFG_DISCONNECTED_ANT_IDX      = BIT(14),
   58         IWL_CALIB_CFG_ANT_COUPLING_IDX          = BIT(15),
   59         IWL_CALIB_CFG_DAC_IDX                   = BIT(16),
   60         IWL_CALIB_CFG_ABS_IDX                   = BIT(17),
   61         IWL_CALIB_CFG_AGC_IDX                   = BIT(18),
   62 };
   63 
   64 /**
   65  * struct iwl_phy_specific_cfg - specific PHY filter configuration
   66  *
   67  * Sent as part of the phy configuration command (v3) to configure specific FW
   68  * defined PHY filters that can be applied to each antenna.
   69  *
   70  * @filter_cfg_chain_a: filter config id for LMAC1 chain A
   71  * @filter_cfg_chain_b: filter config id for LMAC1 chain B
   72  * @filter_cfg_chain_c: filter config id for LMAC2 chain A
   73  * @filter_cfg_chain_d: filter config id for LMAC2 chain B
   74  * values: 0 - no filter; 0xffffffff - reserved; otherwise - filter id
   75  */
   76 struct iwl_phy_specific_cfg {
   77         __le32 filter_cfg_chain_a;
   78         __le32 filter_cfg_chain_b;
   79         __le32 filter_cfg_chain_c;
   80         __le32 filter_cfg_chain_d;
   81 } __packed; /* PHY_SPECIFIC_CONFIGURATION_API_VER_1*/
   82 
   83 /**
   84  * struct iwl_phy_cfg_cmd - Phy configuration command
   85  *
   86  * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
   87  * @calib_control: calibration control data
   88  */
   89 struct iwl_phy_cfg_cmd_v1 {
   90         __le32  phy_cfg;
   91         struct iwl_calib_ctrl calib_control;
   92 } __packed;
   93 
   94 /**
   95  * struct iwl_phy_cfg_cmd_v3 - Phy configuration command (v3)
   96  *
   97  * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
   98  * @calib_control: calibration control data
   99  * @phy_specific_cfg: configure predefined PHY filters
  100  */
  101 struct iwl_phy_cfg_cmd_v3 {
  102         __le32  phy_cfg;
  103         struct iwl_calib_ctrl calib_control;
  104         struct iwl_phy_specific_cfg phy_specific_cfg;
  105 } __packed; /* PHY_CONFIGURATION_CMD_API_S_VER_3 */
  106 
  107 /*
  108  * enum iwl_dc2dc_config_id - flag ids
  109  *
  110  * Ids of dc2dc configuration flags
  111  */
  112 enum iwl_dc2dc_config_id {
  113         DCDC_LOW_POWER_MODE_MSK_SET  = 0x1, /* not used */
  114         DCDC_FREQ_TUNE_SET = 0x2,
  115 }; /* MARKER_ID_API_E_VER_1 */
  116 
  117 #endif /* __iwl_fw_api_config_h__ */

Cache object: 37071e5027cfebd91f5423539eb77a95

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/dev/iwlwifi/fw/api/config.h

FreeBSD/Linux Kernel Cross Reference
sys/contrib/dev/iwlwifi/fw/api/config.h