Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/dev/iwlwifi/fw/api/power.h
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* 3 * Copyright (C) 2012-2014, 2018-2022 Intel Corporation 4 * Copyright (C) 2013-2014 Intel Mobile Communications GmbH 5 * Copyright (C) 2015-2017 Intel Deutschland GmbH 6 */ 7 #ifndef __iwl_fw_api_power_h__ 8 #define __iwl_fw_api_power_h__ 9 10 /* Power Management Commands, Responses, Notifications */ 11 12 /** 13 * enum iwl_ltr_config_flags - masks for LTR config command flags 14 * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status 15 * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow 16 * memory access 17 * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR 18 * reg change 19 * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from 20 * D0 to D3 21 * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register 22 * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register 23 * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD 24 * @LTR_CFG_FLAG_UPDATE_VALUES: update config values and short 25 * idle timeout 26 */ 27 enum iwl_ltr_config_flags { 28 LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0), 29 LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1), 30 LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2), 31 LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3), 32 LTR_CFG_FLAG_SW_SET_SHORT = BIT(4), 33 LTR_CFG_FLAG_SW_SET_LONG = BIT(5), 34 LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6), 35 LTR_CFG_FLAG_UPDATE_VALUES = BIT(7), 36 }; 37 38 /** 39 * struct iwl_ltr_config_cmd_v1 - configures the LTR 40 * @flags: See &enum iwl_ltr_config_flags 41 * @static_long: static LTR Long register value. 42 * @static_short: static LTR Short register value. 43 */ 44 struct iwl_ltr_config_cmd_v1 { 45 __le32 flags; 46 __le32 static_long; 47 __le32 static_short; 48 } __packed; /* LTR_CAPABLE_API_S_VER_1 */ 49 50 #define LTR_VALID_STATES_NUM 4 51 52 /** 53 * struct iwl_ltr_config_cmd - configures the LTR 54 * @flags: See &enum iwl_ltr_config_flags 55 * @static_long: static LTR Long register value. 56 * @static_short: static LTR Short register value. 57 * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order: 58 * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES 59 * is set. 60 * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if 61 * %LTR_CFG_FLAG_UPDATE_VALUES is set. 62 */ 63 struct iwl_ltr_config_cmd { 64 __le32 flags; 65 __le32 static_long; 66 __le32 static_short; 67 __le32 ltr_cfg_values[LTR_VALID_STATES_NUM]; 68 __le32 ltr_short_idle_timeout; 69 } __packed; /* LTR_CAPABLE_API_S_VER_2 */ 70 71 /* Radio LP RX Energy Threshold measured in dBm */ 72 #define POWER_LPRX_RSSI_THRESHOLD 75 73 #define POWER_LPRX_RSSI_THRESHOLD_MAX 94 74 #define POWER_LPRX_RSSI_THRESHOLD_MIN 30 75 76 /** 77 * enum iwl_power_flags - masks for power table command flags 78 * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off 79 * receiver and transmitter. '' - does not allow. 80 * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '' Driver disables power management, 81 * '1' Driver enables PM (use rest of parameters) 82 * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '' PM have to walk up every DTIM, 83 * '1' PM could sleep over DTIM till listen Interval. 84 * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all 85 * access categories are both delivery and trigger enabled. 86 * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and 87 * PBW Snoozing enabled 88 * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask 89 * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. 90 * @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving 91 * detection enablement 92 */ 93 enum iwl_power_flags { 94 POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), 95 POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1), 96 POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2), 97 POWER_FLAGS_SNOOZE_ENA_MSK = BIT(5), 98 POWER_FLAGS_BT_SCO_ENA = BIT(8), 99 POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), 100 POWER_FLAGS_LPRX_ENA_MSK = BIT(11), 101 POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12), 102 }; 103 104 #define IWL_POWER_VEC_SIZE 5 105 106 /** 107 * struct iwl_powertable_cmd - legacy power command. Beside old API support this 108 * is used also with a new power API for device wide power settings. 109 * POWER_TABLE_CMD = 0x77 (command, has simple generic response) 110 * 111 * @flags: Power table command flags from POWER_FLAGS_* 112 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. 113 * Minimum allowed:- 3 * DTIM. Keep alive period must be 114 * set regardless of power scheme or current power state. 115 * FW use this value also when PM is disabled. 116 * @debug_flags: debug flags 117 * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to 118 * PSM transition - legacy PM 119 * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to 120 * PSM transition - legacy PM 121 * @sleep_interval: not in use 122 * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag 123 * is set. For example, if it is required to skip over 124 * one DTIM, this value need to be set to 2 (DTIM periods). 125 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. 126 * Default: 80dbm 127 */ 128 struct iwl_powertable_cmd { 129 /* PM_POWER_TABLE_CMD_API_S_VER_6 */ 130 __le16 flags; 131 u8 keep_alive_seconds; 132 u8 debug_flags; 133 __le32 rx_data_timeout; 134 __le32 tx_data_timeout; 135 __le32 sleep_interval[IWL_POWER_VEC_SIZE]; 136 __le32 skip_dtim_periods; 137 __le32 lprx_rssi_threshold; 138 } __packed; 139 140 /** 141 * enum iwl_device_power_flags - masks for device power command flags 142 * @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: 143 * '1' Allow to save power by turning off 144 * receiver and transmitter. '' - does not allow. 145 * @DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK: 146 * Device Retention indication, '1' indicate retention is enabled. 147 * @DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK: 148 * 32Khz external slow clock valid indication, '1' indicate cloack is 149 * valid. 150 */ 151 enum iwl_device_power_flags { 152 DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), 153 DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK = BIT(1), 154 DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK = BIT(12), 155 }; 156 157 /** 158 * struct iwl_device_power_cmd - device wide power command. 159 * DEVICE_POWER_CMD = 0x77 (command, has simple generic response) 160 * 161 * @flags: Power table command flags from &enum iwl_device_power_flags 162 * @reserved: reserved (padding) 163 */ 164 struct iwl_device_power_cmd { 165 /* PM_POWER_TABLE_CMD_API_S_VER_6 */ 166 __le16 flags; 167 __le16 reserved; 168 } __packed; 169 170 /** 171 * struct iwl_mac_power_cmd - New power command containing uAPSD support 172 * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) 173 * @id_and_color: MAC contex identifier, &enum iwl_ctxt_id_and_color 174 * @flags: Power table command flags from POWER_FLAGS_* 175 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. 176 * Minimum allowed:- 3 * DTIM. Keep alive period must be 177 * set regardless of power scheme or current power state. 178 * FW use this value also when PM is disabled. 179 * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to 180 * PSM transition - legacy PM 181 * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to 182 * PSM transition - legacy PM 183 * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag 184 * is set. For example, if it is required to skip over 185 * one DTIM, this value need to be set to 2 (DTIM periods). 186 * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to 187 * PSM transition - uAPSD 188 * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to 189 * PSM transition - uAPSD 190 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. 191 * Default: 80dbm 192 * @snooze_interval: Maximum time between attempts to retrieve buffered data 193 * from the AP [msec] 194 * @snooze_window: A window of time in which PBW snoozing insures that all 195 * packets received. It is also the minimum time from last 196 * received unicast RX packet, before client stops snoozing 197 * for data. [msec] 198 * @snooze_step: TBD 199 * @qndp_tid: TID client shall use for uAPSD QNDP triggers 200 * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for 201 * each corresponding AC. 202 * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. 203 * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct 204 * values. 205 * @heavy_tx_thld_packets: TX threshold measured in number of packets 206 * @heavy_rx_thld_packets: RX threshold measured in number of packets 207 * @heavy_tx_thld_percentage: TX threshold measured in load's percentage 208 * @heavy_rx_thld_percentage: RX threshold measured in load's percentage 209 * @limited_ps_threshold: (unused) 210 * @reserved: reserved (padding) 211 */ 212 struct iwl_mac_power_cmd { 213 /* CONTEXT_DESC_API_T_VER_1 */ 214 __le32 id_and_color; 215 216 /* CLIENT_PM_POWER_TABLE_S_VER_1 */ 217 __le16 flags; 218 __le16 keep_alive_seconds; 219 __le32 rx_data_timeout; 220 __le32 tx_data_timeout; 221 __le32 rx_data_timeout_uapsd; 222 __le32 tx_data_timeout_uapsd; 223 u8 lprx_rssi_threshold; 224 u8 skip_dtim_periods; 225 __le16 snooze_interval; 226 __le16 snooze_window; 227 u8 snooze_step; 228 u8 qndp_tid; 229 u8 uapsd_ac_flags; 230 u8 uapsd_max_sp; 231 u8 heavy_tx_thld_packets; 232 u8 heavy_rx_thld_packets; 233 u8 heavy_tx_thld_percentage; 234 u8 heavy_rx_thld_percentage; 235 u8 limited_ps_threshold; 236 u8 reserved; 237 } __packed; 238 239 /* 240 * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when 241 * associated AP is identified as improperly implementing uAPSD protocol. 242 * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 243 * @sta_id: index of station in uCode's station table - associated AP ID in 244 * this context. 245 */ 246 struct iwl_uapsd_misbehaving_ap_notif { 247 __le32 sta_id; 248 u8 mac_id; 249 u8 reserved[3]; 250 } __packed; 251 252 /** 253 * struct iwl_reduce_tx_power_cmd - TX power reduction command 254 * REDUCE_TX_POWER_CMD = 0x9f 255 * @flags: (reserved for future implementation) 256 * @mac_context_id: id of the mac ctx for which we are reducing TX power. 257 * @pwr_restriction: TX power restriction in dBms. 258 */ 259 struct iwl_reduce_tx_power_cmd { 260 u8 flags; 261 u8 mac_context_id; 262 __le16 pwr_restriction; 263 } __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ 264 265 enum iwl_dev_tx_power_cmd_mode { 266 IWL_TX_POWER_MODE_SET_MAC = 0, 267 IWL_TX_POWER_MODE_SET_DEVICE = 1, 268 IWL_TX_POWER_MODE_SET_CHAINS = 2, 269 IWL_TX_POWER_MODE_SET_ACK = 3, 270 IWL_TX_POWER_MODE_SET_SAR_TIMER = 4, 271 IWL_TX_POWER_MODE_SET_SAR_TIMER_DEFAULT_TABLE = 5, 272 }; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_5 */; 273 274 #define IWL_NUM_CHAIN_TABLES 1 275 #define IWL_NUM_CHAIN_TABLES_V2 2 276 #define IWL_NUM_CHAIN_LIMITS 2 277 #define IWL_NUM_SUB_BANDS_V1 5 278 #define IWL_NUM_SUB_BANDS_V2 11 279 280 /** 281 * struct iwl_dev_tx_power_common - Common part of the TX power reduction cmd 282 * @set_mode: see &enum iwl_dev_tx_power_cmd_mode 283 * @mac_context_id: id of the mac ctx for which we are reducing TX power. 284 * @pwr_restriction: TX power restriction in 1/8 dBms. 285 * @dev_24: device TX power restriction in 1/8 dBms 286 * @dev_52_low: device TX power restriction upper band - low 287 * @dev_52_high: device TX power restriction upper band - high 288 */ 289 struct iwl_dev_tx_power_common { 290 __le32 set_mode; 291 __le32 mac_context_id; 292 __le16 pwr_restriction; 293 __le16 dev_24; 294 __le16 dev_52_low; 295 __le16 dev_52_high; 296 }; 297 298 /** 299 * struct iwl_dev_tx_power_cmd_v3 - TX power reduction command version 3 300 * @per_chain: per chain restrictions 301 */ 302 struct iwl_dev_tx_power_cmd_v3 { 303 __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; 304 } __packed; /* TX_REDUCED_POWER_API_S_VER_3 */ 305 306 #define IWL_DEV_MAX_TX_POWER 0x7FFF 307 308 /** 309 * struct iwl_dev_tx_power_cmd_v4 - TX power reduction command version 4 310 * @per_chain: per chain restrictions 311 * @enable_ack_reduction: enable or disable close range ack TX power 312 * reduction. 313 * @reserved: reserved (padding) 314 */ 315 struct iwl_dev_tx_power_cmd_v4 { 316 __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; 317 u8 enable_ack_reduction; 318 u8 reserved[3]; 319 } __packed; /* TX_REDUCED_POWER_API_S_VER_4 */ 320 321 /** 322 * struct iwl_dev_tx_power_cmd_v5 - TX power reduction command version 5 323 * @per_chain: per chain restrictions 324 * @enable_ack_reduction: enable or disable close range ack TX power 325 * reduction. 326 * @per_chain_restriction_changed: is per_chain_restriction has changed 327 * from last command. used if set_mode is 328 * IWL_TX_POWER_MODE_SET_SAR_TIMER. 329 * note: if not changed, the command is used for keep alive only. 330 * @reserved: reserved (padding) 331 * @timer_period: timer in milliseconds. if expires FW will change to default 332 * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER 333 */ 334 struct iwl_dev_tx_power_cmd_v5 { 335 __le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; 336 u8 enable_ack_reduction; 337 u8 per_chain_restriction_changed; 338 u8 reserved[2]; 339 __le32 timer_period; 340 } __packed; /* TX_REDUCED_POWER_API_S_VER_5 */ 341 342 /** 343 * struct iwl_dev_tx_power_cmd_v6 - TX power reduction command version 6 344 * @per_chain: per chain restrictions 345 * @enable_ack_reduction: enable or disable close range ack TX power 346 * reduction. 347 * @per_chain_restriction_changed: is per_chain_restriction has changed 348 * from last command. used if set_mode is 349 * IWL_TX_POWER_MODE_SET_SAR_TIMER. 350 * note: if not changed, the command is used for keep alive only. 351 * @reserved: reserved (padding) 352 * @timer_period: timer in milliseconds. if expires FW will change to default 353 * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER 354 */ 355 struct iwl_dev_tx_power_cmd_v6 { 356 __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; 357 u8 enable_ack_reduction; 358 u8 per_chain_restriction_changed; 359 u8 reserved[2]; 360 __le32 timer_period; 361 } __packed; /* TX_REDUCED_POWER_API_S_VER_6 */ 362 363 /** 364 * struct iwl_dev_tx_power_cmd_v7 - TX power reduction command version 7 365 * @per_chain: per chain restrictions 366 * @enable_ack_reduction: enable or disable close range ack TX power 367 * reduction. 368 * @per_chain_restriction_changed: is per_chain_restriction has changed 369 * from last command. used if set_mode is 370 * IWL_TX_POWER_MODE_SET_SAR_TIMER. 371 * note: if not changed, the command is used for keep alive only. 372 * @reserved: reserved (padding) 373 * @timer_period: timer in milliseconds. if expires FW will change to default 374 * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER 375 * @flags: reduce power flags. 376 */ 377 struct iwl_dev_tx_power_cmd_v7 { 378 __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; 379 u8 enable_ack_reduction; 380 u8 per_chain_restriction_changed; 381 u8 reserved[2]; 382 __le32 timer_period; 383 __le32 flags; 384 } __packed; /* TX_REDUCED_POWER_API_S_VER_7 */ 385 /** 386 * struct iwl_dev_tx_power_cmd - TX power reduction command (multiversion) 387 * @common: common part of the command 388 * @v3: version 3 part of the command 389 * @v4: version 4 part of the command 390 * @v5: version 5 part of the command 391 * @v6: version 6 part of the command 392 */ 393 struct iwl_dev_tx_power_cmd { 394 struct iwl_dev_tx_power_common common; 395 union { 396 struct iwl_dev_tx_power_cmd_v3 v3; 397 struct iwl_dev_tx_power_cmd_v4 v4; 398 struct iwl_dev_tx_power_cmd_v5 v5; 399 struct iwl_dev_tx_power_cmd_v6 v6; 400 struct iwl_dev_tx_power_cmd_v7 v7; 401 }; 402 }; 403 404 #define IWL_NUM_GEO_PROFILES 3 405 #define IWL_NUM_GEO_PROFILES_V3 8 406 #define IWL_NUM_BANDS_PER_CHAIN_V1 2 407 #define IWL_NUM_BANDS_PER_CHAIN_V2 3 408 409 /** 410 * enum iwl_geo_per_chain_offset_operation - type of operation 411 * @IWL_PER_CHAIN_OFFSET_SET_TABLES: send the tables from the host to the FW. 412 * @IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE: retrieve the last configured table. 413 */ 414 enum iwl_geo_per_chain_offset_operation { 415 IWL_PER_CHAIN_OFFSET_SET_TABLES, 416 IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE, 417 }; /* PER_CHAIN_OFFSET_OPERATION_E */ 418 419 /** 420 * struct iwl_per_chain_offset - embedded struct for PER_CHAIN_LIMIT_OFFSET_CMD. 421 * @max_tx_power: maximum allowed tx power. 422 * @chain_a: tx power offset for chain a. 423 * @chain_b: tx power offset for chain b. 424 */ 425 struct iwl_per_chain_offset { 426 __le16 max_tx_power; 427 u8 chain_a; 428 u8 chain_b; 429 } __packed; /* PER_CHAIN_LIMIT_OFFSET_PER_CHAIN_S_VER_1 */ 430 431 /** 432 * struct iwl_geo_tx_power_profile_cmd_v1 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. 433 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation 434 * @table: offset profile per band. 435 */ 436 struct iwl_geo_tx_power_profiles_cmd_v1 { 437 __le32 ops; 438 struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1]; 439 } __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_1 */ 440 441 /** 442 * struct iwl_geo_tx_power_profile_cmd_v2 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. 443 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation 444 * @table: offset profile per band. 445 * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) 446 */ 447 struct iwl_geo_tx_power_profiles_cmd_v2 { 448 __le32 ops; 449 struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1]; 450 __le32 table_revision; 451 } __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_2 */ 452 453 /** 454 * struct iwl_geo_tx_power_profile_cmd_v3 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. 455 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation 456 * @table: offset profile per band. 457 * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) 458 */ 459 struct iwl_geo_tx_power_profiles_cmd_v3 { 460 __le32 ops; 461 struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V2]; 462 __le32 table_revision; 463 } __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_3 */ 464 465 /** 466 * struct iwl_geo_tx_power_profile_cmd_v4 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. 467 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation 468 * @table: offset profile per band. 469 * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) 470 */ 471 struct iwl_geo_tx_power_profiles_cmd_v4 { 472 __le32 ops; 473 struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V1]; 474 __le32 table_revision; 475 } __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_4 */ 476 477 /** 478 * struct iwl_geo_tx_power_profile_cmd_v5 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. 479 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation 480 * @table: offset profile per band. 481 * @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) 482 */ 483 struct iwl_geo_tx_power_profiles_cmd_v5 { 484 __le32 ops; 485 struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V2]; 486 __le32 table_revision; 487 } __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_5 */ 488 489 union iwl_geo_tx_power_profiles_cmd { 490 struct iwl_geo_tx_power_profiles_cmd_v1 v1; 491 struct iwl_geo_tx_power_profiles_cmd_v2 v2; 492 struct iwl_geo_tx_power_profiles_cmd_v3 v3; 493 struct iwl_geo_tx_power_profiles_cmd_v4 v4; 494 struct iwl_geo_tx_power_profiles_cmd_v5 v5; 495 }; 496 497 /** 498 * struct iwl_geo_tx_power_profiles_resp - response to PER_CHAIN_LIMIT_OFFSET_CMD cmd 499 * @profile_idx: current geo profile in use 500 */ 501 struct iwl_geo_tx_power_profiles_resp { 502 __le32 profile_idx; 503 } __packed; /* PER_CHAIN_LIMIT_OFFSET_RSP */ 504 505 /** 506 * union iwl_ppag_table_cmd - union for all versions of PPAG command 507 * @v1: version 1 508 * @v2: version 2 509 * 510 * @flags: bit 0 - indicates enablement of PPAG for ETSI 511 * bit 1 - indicates enablement of PPAG for CHINA BIOS 512 * bit 1 can be used only in v3 (identical to v2) 513 * @gain: table of antenna gain values per chain and sub-band 514 * @reserved: reserved 515 */ 516 union iwl_ppag_table_cmd { 517 struct { 518 __le32 flags; 519 s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; 520 s8 reserved[2]; 521 } v1; 522 struct { 523 __le32 flags; 524 s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; 525 s8 reserved[2]; 526 } v2; 527 } __packed; 528 529 #define MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE 26 530 #define MCC_TO_SAR_OFFSET_TABLE_COL_SIZE 13 531 532 /** 533 * struct iwl_sar_offset_mapping_cmd - struct for SAR_OFFSET_MAPPING_TABLE_CMD 534 * @offset_map: mapping a mcc to a geo sar group 535 * @reserved: reserved 536 */ 537 struct iwl_sar_offset_mapping_cmd { 538 u8 offset_map[MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE] 539 [MCC_TO_SAR_OFFSET_TABLE_COL_SIZE]; 540 u16 reserved; 541 } __packed; /*SAR_OFFSET_MAPPING_TABLE_CMD_API_S*/ 542 543 /** 544 * struct iwl_beacon_filter_cmd 545 * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) 546 * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon 547 * to driver if delta in Energy values calculated for this and last 548 * passed beacon is greater than this threshold. Zero value means that 549 * the Energy change is ignored for beacon filtering, and beacon will 550 * not be forced to be sent to driver regardless of this delta. Typical 551 * energy delta 5dB. 552 * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. 553 * Send beacon to driver if delta in Energy values calculated for this 554 * and last passed beacon is greater than this threshold. Zero value 555 * means that the Energy change is ignored for beacon filtering while in 556 * Roaming state, typical energy delta 1dB. 557 * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values 558 * calculated for current beacon is less than the threshold, use 559 * Roaming Energy Delta Threshold, otherwise use normal Energy Delta 560 * Threshold. Typical energy threshold is -72dBm. 561 * @bf_temp_threshold: This threshold determines the type of temperature 562 * filtering (Slow or Fast) that is selected (Units are in Celsuis): 563 * If the current temperature is above this threshold - Fast filter 564 * will be used, If the current temperature is below this threshold - 565 * Slow filter will be used. 566 * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values 567 * calculated for this and the last passed beacon is greater than this 568 * threshold. Zero value means that the temperature change is ignored for 569 * beacon filtering; beacons will not be forced to be sent to driver 570 * regardless of whether its temerature has been changed. 571 * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values 572 * calculated for this and the last passed beacon is greater than this 573 * threshold. Zero value means that the temperature change is ignored for 574 * beacon filtering; beacons will not be forced to be sent to driver 575 * regardless of whether its temerature has been changed. 576 * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. 577 * @bf_debug_flag: beacon filtering debug configuration 578 * @bf_escape_timer: Send beacons to to driver if no beacons were passed 579 * for a specific period of time. Units: Beacons. 580 * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed 581 * for a longer period of time then this escape-timeout. Units: Beacons. 582 * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. 583 * @bf_threshold_absolute_low: See below. 584 * @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated 585 * for this beacon crossed this absolute threshold. For the 'Increase' 586 * direction the bf_energy_absolute_low[i] is used. For the 'Decrease' 587 * direction the bf_energy_absolute_high[i] is used. Zero value means 588 * that this specific threshold is ignored for beacon filtering, and 589 * beacon will not be forced to be sent to driver due to this setting. 590 */ 591 struct iwl_beacon_filter_cmd { 592 __le32 bf_energy_delta; 593 __le32 bf_roaming_energy_delta; 594 __le32 bf_roaming_state; 595 __le32 bf_temp_threshold; 596 __le32 bf_temp_fast_filter; 597 __le32 bf_temp_slow_filter; 598 __le32 bf_enable_beacon_filter; 599 __le32 bf_debug_flag; 600 __le32 bf_escape_timer; 601 __le32 ba_escape_timer; 602 __le32 ba_enable_beacon_abort; 603 __le32 bf_threshold_absolute_low[2]; 604 __le32 bf_threshold_absolute_high[2]; 605 } __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */ 606 607 /* Beacon filtering and beacon abort */ 608 #define IWL_BF_ENERGY_DELTA_DEFAULT 5 609 #define IWL_BF_ENERGY_DELTA_D0I3 20 610 #define IWL_BF_ENERGY_DELTA_MAX 255 611 #define IWL_BF_ENERGY_DELTA_MIN 0 612 613 #define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 614 #define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20 615 #define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 616 #define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 617 618 #define IWL_BF_ROAMING_STATE_DEFAULT 72 619 #define IWL_BF_ROAMING_STATE_D0I3 72 620 #define IWL_BF_ROAMING_STATE_MAX 255 621 #define IWL_BF_ROAMING_STATE_MIN 0 622 623 #define IWL_BF_TEMP_THRESHOLD_DEFAULT 112 624 #define IWL_BF_TEMP_THRESHOLD_D0I3 112 625 #define IWL_BF_TEMP_THRESHOLD_MAX 255 626 #define IWL_BF_TEMP_THRESHOLD_MIN 0 627 628 #define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1 629 #define IWL_BF_TEMP_FAST_FILTER_D0I3 1 630 #define IWL_BF_TEMP_FAST_FILTER_MAX 255 631 #define IWL_BF_TEMP_FAST_FILTER_MIN 0 632 633 #define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5 634 #define IWL_BF_TEMP_SLOW_FILTER_D0I3 20 635 #define IWL_BF_TEMP_SLOW_FILTER_MAX 255 636 #define IWL_BF_TEMP_SLOW_FILTER_MIN 0 637 638 #define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 639 640 #define IWL_BF_DEBUG_FLAG_DEFAULT 0 641 #define IWL_BF_DEBUG_FLAG_D0I3 0 642 643 #define IWL_BF_ESCAPE_TIMER_DEFAULT 0 644 #define IWL_BF_ESCAPE_TIMER_D0I3 0 645 #define IWL_BF_ESCAPE_TIMER_MAX 1024 646 #define IWL_BF_ESCAPE_TIMER_MIN 0 647 648 #define IWL_BA_ESCAPE_TIMER_DEFAULT 6 649 #define IWL_BA_ESCAPE_TIMER_D0I3 6 650 #define IWL_BA_ESCAPE_TIMER_D3 9 651 #define IWL_BA_ESCAPE_TIMER_MAX 1024 652 #define IWL_BA_ESCAPE_TIMER_MIN 0 653 654 #define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 655 656 #define IWL_BF_CMD_CONFIG(mode) \ 657 .bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode), \ 658 .bf_roaming_energy_delta = \ 659 cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode), \ 660 .bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode), \ 661 .bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode), \ 662 .bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode), \ 663 .bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode), \ 664 .bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode), \ 665 .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode), \ 666 .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode) 667 668 #define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT) 669 #define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3) 670 #endif /* __iwl_fw_api_power_h__ */
Cache object: b059c6ca16fae516fc2469299127dc13
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]