1 NVIDIA Tegra114 Clock And Reset Controller
2
3 This binding uses the common clock binding:
4 Documentation/devicetree/bindings/clock/clock-bindings.txt
5
6 The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
7 for muxing and gating Tegra's clocks, and setting their rates.
8
9 Required properties :
10 - compatible : Should be "nvidia,tegra114-car"
11 - reg : Should contain CAR registers location and length
12 - clocks : Should contain phandle and clock specifiers for two clocks:
13 the 32 KHz "32k_in", and the board-specific oscillator "osc".
14 - #clock-cells : Should be 1.
15 In clock consumers, this cell represents the clock ID exposed by the
16 CAR. The assignments may be found in header file
17 <dt-bindings/clock/tegra114-car.h>.
18 - #reset-cells : Should be 1.
19 In clock consumers, this cell represents the bit number in the CAR's
20 array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
21
22 Example SoC include file:
23
24 / {
25 tegra_car: clock {
26 compatible = "nvidia,tegra114-car";
27 reg = <0x60006000 0x1000>;
28 #clock-cells = <1>;
29 #reset-cells = <1>;
30 };
31
32 usb@c5004000 {
33 clocks = <&tegra_car TEGRA114_CLK_USB2>;
34 };
35 };
36
37 Example board file:
38
39 / {
40 clocks {
41 compatible = "simple-bus";
42 #address-cells = <1>;
43 #size-cells = <0>;
44
45 osc: clock@0 {
46 compatible = "fixed-clock";
47 reg = <0>;
48 #clock-cells = <0>;
49 clock-frequency = <12000000>;
50 };
51
52 clk_32k: clock@1 {
53 compatible = "fixed-clock";
54 reg = <1>;
55 #clock-cells = <0>;
56 clock-frequency = <32768>;
57 };
58 };
59
60 &tegra_car {
61 clocks = <&clk_32k> <&osc>;
62 };
63 };
Cache object: 5dd5d9bdf359e9c2eb134a9ee201ec97
|