1 Toshiba TC358767 eDP bridge bindings
2
3 Required properties:
4 - compatible: "toshiba,tc358767"
5 - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
6 - clock-names: should be "ref"
7 - clocks: OF device-tree clock specification for refclk input. The reference
8 clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
9
10 Optional properties:
11 - shutdown-gpios: OF device-tree gpio specification for SD pin
12 (active high shutdown input)
13 - reset-gpios: OF device-tree gpio specification for RSTX pin
14 (active low system reset)
15 - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
16 - ports: the ports node can contain video interface port nodes to connect
17 to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
18 - port@0: DSI input port
19 - port@1: DPI input port
20 - port@2: eDP/DP output port
21
22 [1]: Documentation/devicetree/bindings/graph.txt
23 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
24
25 Example:
26 edp-bridge@68 {
27 compatible = "toshiba,tc358767";
28 reg = <0x68>;
29 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
30 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
31 clock-names = "ref";
32 clocks = <&edp_refclk>;
33
34 ports {
35 #address-cells = <1>;
36 #size-cells = <0>;
37
38 port@1 {
39 reg = <1>;
40
41 bridge_in: endpoint {
42 remote-endpoint = <&dpi_out>;
43 };
44 };
45
46 port@2 {
47 reg = <2>;
48
49 bridge_out: endpoint {
50 remote-endpoint = <&panel_in>;
51 };
52 };
53 };
54 };
Cache object: de49e6fa5b13bf78df15a1bb28b526d2
|