| 
     1 Toshiba TC358767 eDP bridge bindings
    2 
    3 Required properties:
    4  - compatible: "toshiba,tc358767"
    5  - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
    6  - clock-names: should be "ref"
    7  - clocks: OF device-tree clock specification for refclk input. The reference
    8    clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
    9 
   10 Optional properties:
   11  - shutdown-gpios: OF device-tree gpio specification for SD pin
   12                    (active high shutdown input)
   13  - reset-gpios: OF device-tree gpio specification for RSTX pin
   14                 (active low system reset)
   15  - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
   16  - ports: the ports node can contain video interface port nodes to connect
   17    to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
   18     - port@0: DSI input port
   19     - port@1: DPI input port
   20     - port@2: eDP/DP output port
   21 
   22 [1]: Documentation/devicetree/bindings/graph.txt
   23 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
   24 
   25 Example:
   26         edp-bridge@68 {
   27                 compatible = "toshiba,tc358767";
   28                 reg = <0x68>;
   29                 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
   30                 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
   31                 clock-names = "ref";
   32                 clocks = <&edp_refclk>;
   33 
   34                 ports {
   35                         #address-cells = <1>;
   36                         #size-cells = <0>;
   37 
   38                         port@1 {
   39                                 reg = <1>;
   40 
   41                                 bridge_in: endpoint {
   42                                         remote-endpoint = <&dpi_out>;
   43                                 };
   44                         };
   45 
   46                         port@2 {
   47                                 reg = <2>;
   48 
   49                                 bridge_out: endpoint {
   50                                         remote-endpoint = <&panel_in>;
   51                                 };
   52                         };
   53                 };
   54         };
Cache object: de49e6fa5b13bf78df15a1bb28b526d2 
 
 |