| 
     1 Himax HX8357D display panels
    2 
    3 This binding is for display panels using a Himax HX8357D controller in SPI
    4 mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
    5 
    6 Required properties:
    7 - compatible:   "adafruit,yx350hv15", "himax,hx8357d"
    8 - dc-gpios:     D/C pin
    9 - reg:          address of the panel on the SPI bus
   10 
   11 The node for this driver must be a child node of a SPI controller, hence
   12 all mandatory properties described in ../spi/spi-bus.txt must be specified.
   13 
   14 Optional properties:
   15 - rotation:     panel rotation in degrees counter clockwise (0,90,180,270)
   16 - backlight:    phandle of the backlight device attached to the panel
   17 
   18 Example:
   19         display@0{
   20                 compatible = "adafruit,yx350hv15", "himax,hx8357d";
   21                 reg = <0>;
   22                 spi-max-frequency = <32000000>;
   23                 dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
   24                 rotation = <90>;
   25                 backlight = <&backlight>;
   26         };
Cache object: cccba1a43116b89281c20b2950ef7103 
 
 |