1 Qualcomm adreno/snapdragon MDP5 display controller
2
3 Description:
4
5 This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
6 encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
7 controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
8
9 MDSS:
10 Required properties:
11 - compatible:
12 * "qcom,mdss" - MDSS
13 - reg: Physical base address and length of the controller's registers.
14 - reg-names: The names of register regions. The following regions are required:
15 * "mdss_phys"
16 * "vbif_phys"
17 - interrupts: The interrupt signal from MDSS.
18 - interrupt-controller: identifies the node as an interrupt controller.
19 - #interrupt-cells: specifies the number of cells needed to encode an interrupt
20 source, should be 1.
21 - power-domains: a power domain consumer specifier according to
22 Documentation/devicetree/bindings/power/power_domain.txt
23 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
24 - clock-names: the following clocks are required.
25 * "iface"
26 * "bus"
27 * "vsync"
28 - #address-cells: number of address cells for the MDSS children. Should be 1.
29 - #size-cells: Should be 1.
30 - ranges: parent bus address space is the same as the child bus address space.
31
32 Optional properties:
33 - clock-names: the following clocks are optional:
34 * "lut"
35
36 MDP5:
37 Required properties:
38 - compatible:
39 * "qcom,mdp5" - MDP5
40 - reg: Physical base address and length of the controller's registers.
41 - reg-names: The names of register regions. The following regions are required:
42 * "mdp_phys"
43 - interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
44 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
45 - clock-names: the following clocks are required.
46 - * "bus"
47 - * "iface"
48 - * "core"
49 - * "vsync"
50 - ports: contains the list of output ports from MDP. These connect to interfaces
51 that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
52 special case since it is a part of the MDP block itself).
53
54 Each output port contains an endpoint that describes how it is connected to an
55 external interface. These are described by the standard properties documented
56 here:
57 Documentation/devicetree/bindings/graph.txt
58 Documentation/devicetree/bindings/media/video-interfaces.txt
59
60 The availability of output ports can vary across SoC revisions:
61
62 For MSM8974 and APQ8084:
63 Port 0 -> MDP_INTF0 (eDP)
64 Port 1 -> MDP_INTF1 (DSI1)
65 Port 2 -> MDP_INTF2 (DSI2)
66 Port 3 -> MDP_INTF3 (HDMI)
67
68 For MSM8916:
69 Port 0 -> MDP_INTF1 (DSI1)
70
71 For MSM8994 and MSM8996:
72 Port 0 -> MDP_INTF1 (DSI1)
73 Port 1 -> MDP_INTF2 (DSI2)
74 Port 2 -> MDP_INTF3 (HDMI)
75
76 Optional properties:
77 - clock-names: the following clocks are optional:
78 * "lut"
79 * "tbu"
80 * "tbu_rt"
81
82 Example:
83
84 / {
85 ...
86
87 mdss: mdss@1a00000 {
88 compatible = "qcom,mdss";
89 reg = <0x1a00000 0x1000>,
90 <0x1ac8000 0x3000>;
91 reg-names = "mdss_phys", "vbif_phys";
92
93 power-domains = <&gcc MDSS_GDSC>;
94
95 clocks = <&gcc GCC_MDSS_AHB_CLK>,
96 <&gcc GCC_MDSS_AXI_CLK>,
97 <&gcc GCC_MDSS_VSYNC_CLK>;
98 clock-names = "iface",
99 "bus",
100 "vsync"
101
102 interrupts = <0 72 0>;
103
104 interrupt-controller;
105 #interrupt-cells = <1>;
106
107 #address-cells = <1>;
108 #size-cells = <1>;
109 ranges;
110
111 mdp: mdp@1a01000 {
112 compatible = "qcom,mdp5";
113 reg = <0x1a01000 0x90000>;
114 reg-names = "mdp_phys";
115
116 interrupt-parent = <&mdss>;
117 interrupts = <0 0>;
118
119 clocks = <&gcc GCC_MDSS_AHB_CLK>,
120 <&gcc GCC_MDSS_AXI_CLK>,
121 <&gcc GCC_MDSS_MDP_CLK>,
122 <&gcc GCC_MDSS_VSYNC_CLK>;
123 clock-names = "iface",
124 "bus",
125 "core",
126 "vsync";
127
128 ports {
129 #address-cells = <1>;
130 #size-cells = <0>;
131
132 port@0 {
133 reg = <0>;
134 mdp5_intf1_out: endpoint {
135 remote-endpoint = <&dsi0_in>;
136 };
137 };
138 };
139 };
140
141 dsi0: dsi@1a98000 {
142 ...
143 ports {
144 ...
145 port@0 {
146 reg = <0>;
147 dsi0_in: endpoint {
148 remote-endpoint = <&mdp5_intf1_out>;
149 };
150 };
151 ...
152 };
153 ...
154 };
155
156 dsi_phy0: dsi-phy@1a98300 {
157 ...
158 };
159 };
160 };
Cache object: fbd007ec8abb8068b05bb4c2f3273247
|