Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/display/st,stih4xx.txt
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 STMicroelectronics stih4xx platforms 2 3 - sti-vtg: video timing generator 4 Required properties: 5 - compatible: "st,vtg" 6 - reg: Physical base address of the IP registers and length of memory mapped region. 7 Optional properties: 8 - interrupts : VTG interrupt number to the CPU. 9 - st,slave: phandle on a slave vtg 10 11 - sti-vtac: video timing advanced inter dye communication Rx and TX 12 Required properties: 13 - compatible: "st,vtac-main" or "st,vtac-aux" 14 - reg: Physical base address of the IP registers and length of memory mapped region. 15 - clocks: from common clock binding: handle hardware IP needed clocks, the 16 number of clocks may depend of the SoC type. 17 See ../clocks/clock-bindings.txt for details. 18 - clock-names: names of the clocks listed in clocks property in the same 19 order. 20 21 - sti-display-subsystem: Master device for DRM sub-components 22 This device must be the parent of all the sub-components and is responsible 23 of bind them. 24 Required properties: 25 - compatible: "st,sti-display-subsystem" 26 - ranges: to allow probing of subdevices 27 28 - sti-compositor: frame compositor engine 29 must be a child of sti-display-subsystem 30 Required properties: 31 - compatible: "st,stih<chip>-compositor" 32 - reg: Physical base address of the IP registers and length of memory mapped region. 33 - clocks: from common clock binding: handle hardware IP needed clocks, the 34 number of clocks may depend of the SoC type. 35 See ../clocks/clock-bindings.txt for details. 36 - clock-names: names of the clocks listed in clocks property in the same 37 order. 38 - resets: resets to be used by the device 39 See ../reset/reset.txt for details. 40 - reset-names: names of the resets listed in resets property in the same 41 order. 42 - st,vtg: phandle(s) on vtg device (main and aux) nodes. 43 44 - sti-tvout: video out hardware block 45 must be a child of sti-display-subsystem 46 Required properties: 47 - compatible: "st,stih<chip>-tvout" 48 - reg: Physical base address of the IP registers and length of memory mapped region. 49 - reg-names: names of the mapped memory regions listed in regs property in 50 the same order. 51 - resets: resets to be used by the device 52 See ../reset/reset.txt for details. 53 - reset-names: names of the resets listed in resets property in the same 54 order. 55 56 - sti-hdmi: hdmi output block 57 must be a child of sti-display-subsystem 58 Required properties: 59 - compatible: "st,stih<chip>-hdmi"; 60 - reg: Physical base address of the IP registers and length of memory mapped region. 61 - reg-names: names of the mapped memory regions listed in regs property in 62 the same order. 63 - interrupts : HDMI interrupt number to the CPU. 64 - interrupt-names: names of the interrupts listed in interrupts property in 65 the same order 66 - clocks: from common clock binding: handle hardware IP needed clocks, the 67 number of clocks may depend of the SoC type. 68 - clock-names: names of the clocks listed in clocks property in the same 69 order. 70 - ddc: phandle of an I2C controller used for DDC EDID probing 71 72 sti-hda: 73 Required properties: 74 must be a child of sti-display-subsystem 75 - compatible: "st,stih<chip>-hda" 76 - reg: Physical base address of the IP registers and length of memory mapped region. 77 - reg-names: names of the mapped memory regions listed in regs property in 78 the same order. 79 - clocks: from common clock binding: handle hardware IP needed clocks, the 80 number of clocks may depend of the SoC type. 81 See ../clocks/clock-bindings.txt for details. 82 - clock-names: names of the clocks listed in clocks property in the same 83 order. 84 85 sti-dvo: 86 Required properties: 87 must be a child of sti-display-subsystem 88 - compatible: "st,stih<chip>-dvo" 89 - reg: Physical base address of the IP registers and length of memory mapped region. 90 - reg-names: names of the mapped memory regions listed in regs property in 91 the same order. 92 - clocks: from common clock binding: handle hardware IP needed clocks, the 93 number of clocks may depend of the SoC type. 94 See ../clocks/clock-bindings.txt for details. 95 - clock-names: names of the clocks listed in clocks property in the same 96 order. 97 - pinctrl-0: pin control handle 98 - pinctrl-names: names of the pin control states to use 99 - sti,panel: phandle of the panel connected to the DVO output 100 101 sti-hqvdp: 102 must be a child of sti-display-subsystem 103 Required properties: 104 - compatible: "st,stih<chip>-hqvdp" 105 - reg: Physical base address of the IP registers and length of memory mapped region. 106 - clocks: from common clock binding: handle hardware IP needed clocks, the 107 number of clocks may depend of the SoC type. 108 See ../clocks/clock-bindings.txt for details. 109 - clock-names: names of the clocks listed in clocks property in the same 110 order. 111 - resets: resets to be used by the device 112 See ../reset/reset.txt for details. 113 - reset-names: names of the resets listed in resets property in the same 114 order. 115 - st,vtg: phandle on vtg main device node. 116 117 Example: 118 119 / { 120 ... 121 122 vtg_main_slave: sti-vtg-main-slave@fe85a800 { 123 compatible = "st,vtg"; 124 reg = <0xfe85A800 0x300>; 125 interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>; 126 }; 127 128 vtg_main: sti-vtg-main-master@fd348000 { 129 compatible = "st,vtg"; 130 reg = <0xfd348000 0x400>; 131 st,slave = <&vtg_main_slave>; 132 }; 133 134 vtg_aux_slave: sti-vtg-aux-slave@fd348400 { 135 compatible = "st,vtg"; 136 reg = <0xfe858200 0x300>; 137 interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>; 138 }; 139 140 vtg_aux: sti-vtg-aux-master@fd348400 { 141 compatible = "st,vtg"; 142 reg = <0xfd348400 0x400>; 143 st,slave = <&vtg_aux_slave>; 144 }; 145 146 147 sti-vtac-rx-main@fee82800 { 148 compatible = "st,vtac-main"; 149 reg = <0xfee82800 0x200>; 150 clock-names = "vtac"; 151 clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>; 152 }; 153 154 sti-vtac-rx-aux@fee82a00 { 155 compatible = "st,vtac-aux"; 156 reg = <0xfee82a00 0x200>; 157 clock-names = "vtac"; 158 clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>; 159 }; 160 161 sti-vtac-tx-main@fd349000 { 162 compatible = "st,vtac-main"; 163 reg = <0xfd349000 0x200>, <0xfd320000 0x10000>; 164 clock-names = "vtac"; 165 clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; 166 }; 167 168 sti-vtac-tx-aux@fd349200 { 169 compatible = "st,vtac-aux"; 170 reg = <0xfd349200 0x200>, <0xfd320000 0x10000>; 171 clock-names = "vtac"; 172 clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; 173 }; 174 175 sti-display-subsystem { 176 compatible = "st,sti-display-subsystem"; 177 ranges; 178 179 sti-compositor@fd340000 { 180 compatible = "st,stih416-compositor"; 181 reg = <0xfd340000 0x1000>; 182 clock-names = "compo_main", "compo_aux", 183 "pix_main", "pix_aux"; 184 clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>, 185 <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>; 186 reset-names = "compo-main", "compo-aux"; 187 resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>; 188 st,vtg = <&vtg_main>, <&vtg_aux>; 189 }; 190 191 sti-tvout@fe000000 { 192 compatible = "st,stih416-tvout"; 193 reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>; 194 reg-names = "tvout-reg", "hda-reg", "syscfg"; 195 reset-names = "tvout"; 196 resets = <&softreset STIH416_HDTVOUT_SOFTRESET>; 197 }; 198 199 sti-hdmi@fe85c000 { 200 compatible = "st,stih416-hdmi"; 201 reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>; 202 reg-names = "hdmi-reg", "syscfg"; 203 interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>; 204 interrupt-names = "irq"; 205 clock-names = "pix", "tmds", "phy", "audio"; 206 clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; 207 }; 208 209 sti-hda@fe85a000 { 210 compatible = "st,stih416-hda"; 211 reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>; 212 reg-names = "hda-reg", "video-dacs-ctrl"; 213 clock-names = "pix", "hddac"; 214 clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; 215 }; 216 217 sti-dvo@8d00400 { 218 compatible = "st,stih407-dvo"; 219 reg = <0x8d00400 0x200>; 220 reg-names = "dvo-reg"; 221 clock-names = "dvo_pix", "dvo", 222 "main_parent", "aux_parent"; 223 clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>, 224 <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; 225 pinctrl-names = "default"; 226 pinctrl-0 = <&pinctrl_dvo>; 227 sti,panel = <&panel_dvo>; 228 }; 229 230 sti-hqvdp@9c000000 { 231 compatible = "st,stih407-hqvdp"; 232 reg = <0x9C00000 0x100000>; 233 clock-names = "hqvdp", "pix_main"; 234 clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; 235 reset-names = "hqvdp"; 236 resets = <&softreset STIH407_HDQVDP_SOFTRESET>; 237 st,vtg = <&vtg_main>; 238 }; 239 }; 240 ... 241 };
Cache object: e666eeb8cfcc128468a6bf213927c71b
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]