socfpga-eccmgr.txt

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 Altera SoCFPGA ECC Manager
    2 This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
    3 The ECC Manager counts and corrects single bit errors and counts/handles
    4 double bit errors which are uncorrectable.
    5 
    6 Cyclone5 and Arria5 ECC Manager
    7 Required Properties:
    8 - compatible : Should be "altr,socfpga-ecc-manager"
    9 - #address-cells: must be 1
   10 - #size-cells: must be 1
   11 - ranges : standard definition, should translate from local addresses
   12 
   13 Subcomponents:
   14 
   15 L2 Cache ECC
   16 Required Properties:
   17 - compatible : Should be "altr,socfpga-l2-ecc"
   18 - reg : Address and size for ECC error interrupt clear registers.
   19 - interrupts : Should be single bit error interrupt, then double bit error
   20         interrupt. Note the rising edge type.
   21 
   22 On Chip RAM ECC
   23 Required Properties:
   24 - compatible : Should be "altr,socfpga-ocram-ecc"
   25 - reg : Address and size for ECC error interrupt clear registers.
   26 - iram : phandle to On-Chip RAM definition.
   27 - interrupts : Should be single bit error interrupt, then double bit error
   28         interrupt. Note the rising edge type.
   29 
   30 Example:
   31 
   32         eccmgr: eccmgr@ffd08140 {
   33                 compatible = "altr,socfpga-ecc-manager";
   34                 #address-cells = <1>;
   35                 #size-cells = <1>;
   36                 ranges;
   37 
   38                 l2-ecc@ffd08140 {
   39                         compatible = "altr,socfpga-l2-ecc";
   40                         reg = <0xffd08140 0x4>;
   41                         interrupts = <0 36 1>, <0 37 1>;
   42                 };
   43 
   44                 ocram-ecc@ffd08144 {
   45                         compatible = "altr,socfpga-ocram-ecc";
   46                         reg = <0xffd08144 0x4>;
   47                         iram = <&ocram>;
   48                         interrupts = <0 178 1>, <0 179 1>;
   49                 };
   50         };
   51 
   52 Arria10 SoCFPGA ECC Manager
   53 The Arria10 SoC ECC Manager handles the IRQs for each peripheral
   54 in a shared register instead of individual IRQs like the Cyclone5
   55 and Arria5. Therefore the device tree is different as well.
   56 
   57 Required Properties:
   58 - compatible : Should be "altr,socfpga-a10-ecc-manager"
   59 - altr,sysgr-syscon : phandle to Arria10 System Manager Block
   60         containing the ECC manager registers.
   61 - #address-cells: must be 1
   62 - #size-cells: must be 1
   63 - interrupts : Should be single bit error interrupt, then double bit error
   64         interrupt.
   65 - interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
   66 - #interrupt-cells : must be set to 2.
   67 - ranges : standard definition, should translate from local addresses
   68 
   69 Subcomponents:
   70 
   71 L2 Cache ECC
   72 Required Properties:
   73 - compatible : Should be "altr,socfpga-a10-l2-ecc"
   74 - reg : Address and size for ECC error interrupt clear registers.
   75 - interrupts : Should be single bit error interrupt, then double bit error
   76         interrupt, in this order.
   77 
   78 On-Chip RAM ECC
   79 Required Properties:
   80 - compatible : Should be "altr,socfpga-a10-ocram-ecc"
   81 - reg        : Address and size for ECC block registers.
   82 - interrupts : Should be single bit error interrupt, then double bit error
   83         interrupt, in this order.
   84 
   85 Ethernet FIFO ECC
   86 Required Properties:
   87 - compatible      : Should be "altr,socfpga-eth-mac-ecc"
   88 - reg             : Address and size for ECC block registers.
   89 - altr,ecc-parent : phandle to parent Ethernet node.
   90 - interrupts      : Should be single bit error interrupt, then double bit error
   91         interrupt, in this order.
   92 
   93 NAND FIFO ECC
   94 Required Properties:
   95 - compatible      : Should be "altr,socfpga-nand-ecc"
   96 - reg             : Address and size for ECC block registers.
   97 - altr,ecc-parent : phandle to parent NAND node.
   98 - interrupts      : Should be single bit error interrupt, then double bit error
   99         interrupt, in this order.
  100 
  101 DMA FIFO ECC
  102 Required Properties:
  103 - compatible      : Should be "altr,socfpga-dma-ecc"
  104 - reg             : Address and size for ECC block registers.
  105 - altr,ecc-parent : phandle to parent DMA node.
  106 - interrupts      : Should be single bit error interrupt, then double bit error
  107         interrupt, in this order.
  108 
  109 USB FIFO ECC
  110 Required Properties:
  111 - compatible      : Should be "altr,socfpga-usb-ecc"
  112 - reg             : Address and size for ECC block registers.
  113 - altr,ecc-parent : phandle to parent USB node.
  114 - interrupts      : Should be single bit error interrupt, then double bit error
  115         interrupt, in this order.
  116 
  117 QSPI FIFO ECC
  118 Required Properties:
  119 - compatible      : Should be "altr,socfpga-qspi-ecc"
  120 - reg             : Address and size for ECC block registers.
  121 - altr,ecc-parent : phandle to parent QSPI node.
  122 - interrupts      : Should be single bit error interrupt, then double bit error
  123         interrupt, in this order.
  124 
  125 SDMMC FIFO ECC
  126 Required Properties:
  127 - compatible      : Should be "altr,socfpga-sdmmc-ecc"
  128 - reg             : Address and size for ECC block registers.
  129 - altr,ecc-parent : phandle to parent SD/MMC node.
  130 - interrupts      : Should be single bit error interrupt, then double bit error
  131         interrupt, in this order for port A, and then single bit error interrupt,
  132         then double bit error interrupt in this order for port B.
  133 
  134 Example:
  135 
  136         eccmgr: eccmgr@ffd06000 {
  137                 compatible = "altr,socfpga-a10-ecc-manager";
  138                 altr,sysmgr-syscon = <&sysmgr>;
  139                 #address-cells = <1>;
  140                 #size-cells = <1>;
  141                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
  142                              <0 0 IRQ_TYPE_LEVEL_HIGH>;
  143                 interrupt-controller;
  144                 #interrupt-cells = <2>;
  145                 ranges;
  146 
  147                 l2-ecc@ffd06010 {
  148                         compatible = "altr,socfpga-a10-l2-ecc";
  149                         reg = <0xffd06010 0x4>;
  150                         interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
  151                                      <32 IRQ_TYPE_LEVEL_HIGH>;
  152                 };
  153 
  154                 ocram-ecc@ff8c3000 {
  155                         compatible = "altr,socfpga-a10-ocram-ecc";
  156                         reg = <0xff8c3000 0x90>;
  157                         interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
  158                                      <33 IRQ_TYPE_LEVEL_HIGH> ;
  159                 };
  160 
  161                 emac0-rx-ecc@ff8c0800 {
  162                         compatible = "altr,socfpga-eth-mac-ecc";
  163                         reg = <0xff8c0800 0x400>;
  164                         altr,ecc-parent = <&gmac0>;
  165                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
  166                                      <36 IRQ_TYPE_LEVEL_HIGH>;
  167                 };
  168 
  169                 emac0-tx-ecc@ff8c0c00 {
  170                         compatible = "altr,socfpga-eth-mac-ecc";
  171                         reg = <0xff8c0c00 0x400>;
  172                         altr,ecc-parent = <&gmac0>;
  173                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
  174                                      <37 IRQ_TYPE_LEVEL_HIGH>;
  175                 };
  176 
  177                 nand-buf-ecc@ff8c2000 {
  178                         compatible = "altr,socfpga-nand-ecc";
  179                         reg = <0xff8c2000 0x400>;
  180                         altr,ecc-parent = <&nand>;
  181                         interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
  182                                      <43 IRQ_TYPE_LEVEL_HIGH>;
  183                 };
  184 
  185                 nand-rd-ecc@ff8c2400 {
  186                         compatible = "altr,socfpga-nand-ecc";
  187                         reg = <0xff8c2400 0x400>;
  188                         altr,ecc-parent = <&nand>;
  189                         interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
  190                                      <45 IRQ_TYPE_LEVEL_HIGH>;
  191                 };
  192 
  193                 nand-wr-ecc@ff8c2800 {
  194                         compatible = "altr,socfpga-nand-ecc";
  195                         reg = <0xff8c2800 0x400>;
  196                         altr,ecc-parent = <&nand>;
  197                         interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
  198                                      <44 IRQ_TYPE_LEVEL_HIGH>;
  199                 };
  200 
  201                 dma-ecc@ff8c8000 {
  202                         compatible = "altr,socfpga-dma-ecc";
  203                         reg = <0xff8c8000 0x400>;
  204                         altr,ecc-parent = <&pdma>;
  205                         interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
  206                                      <42 IRQ_TYPE_LEVEL_HIGH>;
  207 
  208                 usb0-ecc@ff8c8800 {
  209                         compatible = "altr,socfpga-usb-ecc";
  210                         reg = <0xff8c8800 0x400>;
  211                         altr,ecc-parent = <&usb0>;
  212                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
  213                                      <34 IRQ_TYPE_LEVEL_HIGH>;
  214                 };
  215 
  216                 qspi-ecc@ff8c8400 {
  217                         compatible = "altr,socfpga-qspi-ecc";
  218                         reg = <0xff8c8400 0x400>;
  219                         altr,ecc-parent = <&qspi>;
  220                         interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
  221                                      <46 IRQ_TYPE_LEVEL_HIGH>;
  222                 };
  223 
  224                 sdmmc-ecc@ff8c2c00 {
  225                         compatible = "altr,socfpga-sdmmc-ecc";
  226                         reg = <0xff8c2c00 0x400>;
  227                         altr,ecc-parent = <&mmc>;
  228                         interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
  229                                      <47 IRQ_TYPE_LEVEL_HIGH>,
  230                                      <16 IRQ_TYPE_LEVEL_HIGH>,
  231                                      <48 IRQ_TYPE_LEVEL_HIGH>;
  232                 };
  233         };
  234 
  235 Stratix10 SoCFPGA ECC Manager (ARM64)
  236 The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
  237 in a shared register similar to the Arria10. However, Stratix10 ECC
  238 requires access to registers that can only be read from Secure Monitor
  239 with SMC calls. Therefore the device tree is slightly different. Note
  240 that only 1 interrupt is sent in Stratix10 because the double bit errors
  241 are treated as SErrors in ARM64 instead of IRQs in ARM32.
  242 
  243 Required Properties:
  244 - compatible : Should be "altr,socfpga-s10-ecc-manager"
  245 - altr,sysgr-syscon : phandle to Stratix10 System Manager Block
  246                       containing the ECC manager registers.
  247 - interrupts : Should be single bit error interrupt.
  248 - interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
  249 - #interrupt-cells : must be set to 2.
  250 - #address-cells: must be 1
  251 - #size-cells: must be 1
  252 - ranges : standard definition, should translate from local addresses
  253 
  254 Subcomponents:
  255 
  256 SDRAM ECC
  257 Required Properties:
  258 - compatible : Should be "altr,sdram-edac-s10"
  259 - interrupts : Should be single bit error interrupt.
  260 
  261 On-Chip RAM ECC
  262 Required Properties:
  263 - compatible      : Should be "altr,socfpga-s10-ocram-ecc"
  264 - reg             : Address and size for ECC block registers.
  265 - altr,ecc-parent : phandle to parent OCRAM node.
  266 - interrupts      : Should be single bit error interrupt.
  267 
  268 Ethernet FIFO ECC
  269 Required Properties:
  270 - compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
  271 - reg             : Address and size for ECC block registers.
  272 - altr,ecc-parent : phandle to parent Ethernet node.
  273 - interrupts      : Should be single bit error interrupt.
  274 
  275 NAND FIFO ECC
  276 Required Properties:
  277 - compatible      : Should be "altr,socfpga-s10-nand-ecc"
  278 - reg             : Address and size for ECC block registers.
  279 - altr,ecc-parent : phandle to parent NAND node.
  280 - interrupts      : Should be single bit error interrupt.
  281 
  282 DMA FIFO ECC
  283 Required Properties:
  284 - compatible      : Should be "altr,socfpga-s10-dma-ecc"
  285 - reg             : Address and size for ECC block registers.
  286 - altr,ecc-parent : phandle to parent DMA node.
  287 - interrupts      : Should be single bit error interrupt.
  288 
  289 USB FIFO ECC
  290 Required Properties:
  291 - compatible      : Should be "altr,socfpga-s10-usb-ecc"
  292 - reg             : Address and size for ECC block registers.
  293 - altr,ecc-parent : phandle to parent USB node.
  294 - interrupts      : Should be single bit error interrupt.
  295 
  296 SDMMC FIFO ECC
  297 Required Properties:
  298 - compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
  299 - reg             : Address and size for ECC block registers.
  300 - altr,ecc-parent : phandle to parent SD/MMC node.
  301 - interrupts      : Should be single bit error interrupt for port A
  302                     and then single bit error interrupt for port B.
  303 
  304 Example:
  305 
  306         eccmgr {
  307                 compatible = "altr,socfpga-s10-ecc-manager";
  308                 altr,sysmgr-syscon = <&sysmgr>;
  309                 #address-cells = <1>;
  310                 #size-cells = <1>;
  311                 interrupts = <0 15 4>;
  312                 interrupt-controller;
  313                 #interrupt-cells = <2>;
  314                 ranges;
  315 
  316                 sdramedac {
  317                         compatible = "altr,sdram-edac-s10";
  318                         interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
  319                 };
  320 
  321                 ocram-ecc@ff8cc000 {
  322                         compatible = "altr,socfpga-s10-ocram-ecc";
  323                         reg = <ff8cc000 0x100>;
  324                         altr,ecc-parent = <&ocram>;
  325                         interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
  326                 };
  327 
  328                 emac0-rx-ecc@ff8c0000 {
  329                         compatible = "altr,socfpga-s10-eth-mac-ecc";
  330                         reg = <0xff8c0000 0x100>;
  331                         altr,ecc-parent = <&gmac0>;
  332                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
  333                 };
  334 
  335                 emac0-tx-ecc@ff8c0400 {
  336                         compatible = "altr,socfpga-s10-eth-mac-ecc";
  337                         reg = <0xff8c0400 0x100>;
  338                         altr,ecc-parent = <&gmac0>;
  339                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
  340                 };
  341 
  342                 nand-buf-ecc@ff8c8000 {
  343                         compatible = "altr,socfpga-s10-nand-ecc";
  344                         reg = <0xff8c8000 0x100>;
  345                         altr,ecc-parent = <&nand>;
  346                         interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
  347                 };
  348 
  349                 nand-rd-ecc@ff8c8400 {
  350                         compatible = "altr,socfpga-s10-nand-ecc";
  351                         reg = <0xff8c8400 0x100>;
  352                         altr,ecc-parent = <&nand>;
  353                         interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
  354                 };
  355 
  356                 nand-wr-ecc@ff8c8800 {
  357                         compatible = "altr,socfpga-s10-nand-ecc";
  358                         reg = <0xff8c8800 0x100>;
  359                         altr,ecc-parent = <&nand>;
  360                         interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
  361                 };
  362 
  363                 dma-ecc@ff8c9000 {
  364                         compatible = "altr,socfpga-s10-dma-ecc";
  365                         reg = <0xff8c9000 0x100>;
  366                         altr,ecc-parent = <&pdma>;
  367                         interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
  368 
  369                 usb0-ecc@ff8c4000 {
  370                         compatible = "altr,socfpga-s10-usb-ecc";
  371                         reg = <0xff8c4000 0x100>;
  372                         altr,ecc-parent = <&usb0>;
  373                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
  374                 };
  375 
  376                 sdmmc-ecc@ff8c8c00 {
  377                         compatible = "altr,socfpga-s10-sdmmc-ecc";
  378                         reg = <0xff8c8c00 0x100>;
  379                         altr,ecc-parent = <&mmc>;
  380                         interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
  381                                      <15 IRQ_TYPE_LEVEL_HIGH>;
  382                 };
  383         };
Cache object: d6d598bd04619d25f9167a0c8599f1c8
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/edac/socfpga-eccmgr.txt

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/edac/socfpga-eccmgr.txt
