i2c-mux-pca954x.txt

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 * NXP PCA954x I2C bus switch
    2 
    3 The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
    4 
    5 Required Properties:
    6 
    7   - compatible: Must contain one of the following.
    8     "nxp,pca9540",
    9     "nxp,pca9542",
   10     "nxp,pca9543",
   11     "nxp,pca9544",
   12     "nxp,pca9545",
   13     "nxp,pca9546", "nxp,pca9846",
   14     "nxp,pca9547", "nxp,pca9847",
   15     "nxp,pca9548", "nxp,pca9848",
   16     "nxp,pca9849"
   17 
   18   - reg: The I2C address of the device.
   19 
   20   The following required properties are defined externally:
   21 
   22   - Standard I2C mux properties. See i2c-mux.txt in this directory.
   23   - I2C child bus nodes. See i2c-mux.txt in this directory.
   24 
   25 Optional Properties:
   26 
   27   - reset-gpios: Reference to the GPIO connected to the reset input.
   28   - idle-state: if present, overrides i2c-mux-idle-disconnect,
   29     Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
   30   - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
   31     children in idle state. This is necessary for example, if there are several
   32     multiplexers on the bus and the devices behind them use same I2C addresses.
   33   - interrupts: Interrupt mapping for IRQ.
   34   - interrupt-controller: Marks the device node as an interrupt controller.
   35   - #interrupt-cells : Should be two.
   36     - first cell is the pin number
   37     - second cell is used to specify flags.
   38     See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
   39 
   40 Example:
   41 
   42         i2c-switch@74 {
   43                 compatible = "nxp,pca9548";
   44                 #address-cells = <1>;
   45                 #size-cells = <0>;
   46                 reg = <0x74>;
   47 
   48                 interrupt-parent = <&ipic>;
   49                 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
   50                 interrupt-controller;
   51                 #interrupt-cells = <2>;
   52 
   53                 i2c@2 {
   54                         #address-cells = <1>;
   55                         #size-cells = <0>;
   56                         reg = <2>;
   57 
   58                         eeprom@54 {
   59                                 compatible = "atmel,24c08";
   60                                 reg = <0x54>;
   61                         };
   62                 };
   63 
   64                 i2c@4 {
   65                         #address-cells = <1>;
   66                         #size-cells = <0>;
   67                         reg = <4>;
   68 
   69                         rtc@51 {
   70                                 compatible = "nxp,pcf8563";
   71                                 reg = <0x51>;
   72                         };
   73                 };
   74         };

Cache object: c4bc2b4a81b729285dc4ba0632c8cc7f

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/i2c/i2c-mux-pca954x.txt

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/i2c/i2c-mux-pca954x.txt