1 * Texas Instruments LMP91000 series of potentiostats
2
3 LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
4 LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
5
6 Required properties:
7
8 - compatible: should be one of the following:
9 "ti,lmp91000"
10 "ti,lmp91002"
11 - reg: the I2C address of the device
12 - io-channels: the phandle of the iio provider
13
14 - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
15 needs to be set to signal that an external resistor value is being used.
16
17 Optional properties:
18
19 - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
20 amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
21
22 - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
23 sensor. Must be 10, 33, 50, or 100 (default) ohms.
24
25 Example:
26
27 lmp91000@48 {
28 compatible = "ti,lmp91000";
29 reg = <0x48>;
30 ti,tia-gain-ohm = <7500>;
31 ti,rload = <100>;
32 io-channels = <&adc>;
33 };
Cache object: 6c29695abb3827753ca86319e645ba26
|