The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/iio/pressure/hp03.txt

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10  
    1 HopeRF HP03 digital pressure/temperature sensors
    2 
    3 Required properties:
    4 - compatible: must be "hoperf,hp03"
    5 - xclr-gpio: must be device tree identifier of the XCLR pin.
    6              The XCLR pin is a reset of the ADC in the chip,
    7              it must be pulled HI before the conversion and
    8              readout of the value from the ADC registers and
    9              pulled LO afterward.
   10 
   11 Example:
   12 
   13 hp03@77 {
   14         compatible = "hoperf,hp03";
   15         reg = <0x77>;
   16         xclr-gpio = <&portc 0 0x0>;
   17 };

Cache object: 620fb7e0a85cc1db62c2fd374a1eecdc

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.