sx9500.txt

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 Semtech's SX9500 capacitive proximity button device driver
    2 
    3 Required properties:
    4         - compatible: must be "semtech,sx9500"
    5         - reg: i2c address where to find the device
    6         - interrupts : the sole interrupt generated by the device
    7 
    8         Refer to interrupt-controller/interrupts.txt for generic
    9         interrupt client node bindings.
   10 
   11 Optional properties:
   12         - reset-gpios: Reference to the GPIO connected to the device's active
   13           low reset pin.
   14 
   15 Example:
   16 
   17 sx9500@28 {
   18         compatible = "semtech,sx9500";
   19         reg = <0x28>;
   20         interrupt-parent = <&gpio2>;
   21         interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
   22         reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
   23 };

Cache object: 6a974b2c189d72aa139454f1f6e110ba

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/iio/proximity/sx9500.txt

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/iio/proximity/sx9500.txt