cyttsp.txt

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 * Cypress cyttsp touchscreen controller
    2 
    3 Required properties:
    4  - compatible           : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
    5  - reg                  : Device I2C address or SPI chip select number
    6  - spi-max-frequency    : Maximum SPI clocking speed of the device (for cyttsp-spi)
    7  - interrupts           : (gpio) interrupt to which the chip is connected
    8                           (see interrupt binding[0]).
    9  - bootloader-key       : the 8-byte bootloader key that is required to switch
   10                           the chip from bootloader mode (default mode) to
   11                           application mode.
   12                           This property has to be specified as an array of 8
   13                           '/bits/ 8' values.
   14 
   15 Optional properties:
   16  - reset-gpios          : the reset gpio the chip is connected to
   17                           (see GPIO binding[1] for more details).
   18  - touchscreen-size-x   : horizontal resolution of touchscreen (in pixels)
   19  - touchscreen-size-y   : vertical resolution of touchscreen (in pixels)
   20  - touchscreen-fuzz-x   : horizontal noise value of the absolute input device
   21                           (in pixels)
   22  - touchscreen-fuzz-y   : vertical noise value of the absolute input device
   23                           (in pixels)
   24  - active-distance      : the distance in pixels beyond which a touch must move
   25                           before movement is detected and reported by the device.
   26                           Valid values: 0-15.
   27  - active-interval-ms   : the minimum period in ms between consecutive
   28                           scanning/processing cycles when the chip is in active mode.
   29                           Valid values: 0-255.
   30  - lowpower-interval-ms : the minimum period in ms between consecutive
   31                           scanning/processing cycles when the chip is in low-power mode.
   32                           Valid values: 0-2550
   33  - touch-timeout-ms     : minimum time in ms spent in the active power state while no
   34                           touches are detected before entering low-power mode.
   35                           Valid values: 0-2550
   36  - use-handshake        : enable register-based handshake (boolean). This should
   37                           only be used if the chip is configured to use 'blocking
   38                           communication with timeout' (in this case the device
   39                           generates an interrupt at the end of every
   40                           scanning/processing cycle).
   41 
   42 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
   43 [1]: Documentation/devicetree/bindings/gpio/gpio.txt
   44 
   45 Example:
   46         &i2c1 {
   47                 /* ... */
   48                 cyttsp@a {
   49                         compatible = "cypress,cyttsp-i2c";
   50                         reg = <0xa>;
   51                         interrupt-parent = <&gpio0>;
   52                         interrupts = <28 0>;
   53                         reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
   54 
   55                         touchscreen-size-x = <800>;
   56                         touchscreen-size-y = <480>;
   57                         touchscreen-fuzz-x = <4>;
   58                         touchscreen-fuzz-y = <7>;
   59 
   60                         bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
   61                         active-distance = <8>;
   62                         active-interval-ms = <0>;
   63                         lowpower-interval-ms = <200>;
   64                         touch-timeout-ms = <100>;
   65                 };
   66 
   67                 /* ... */
   68         };
   69 
   70         &mcspi1 {
   71                 /* ... */
   72                 cyttsp@0 {
   73                         compatible = "cypress,cyttsp-spi";
   74                         spi-max-frequency = <6000000>;
   75                         reg = <0>;
   76                         interrupt-parent = <&gpio0>;
   77                         interrupts = <28 0>;
   78                         reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
   79 
   80                         touchscreen-size-x = <800>;
   81                         touchscreen-size-y = <480>;
   82                         touchscreen-fuzz-x = <4>;
   83                         touchscreen-fuzz-y = <7>;
   84 
   85                         bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
   86                         active-distance = <8>;
   87                         active-interval-ms = <0>;
   88                         lowpower-interval-ms = <200>;
   89                         touch-timeout-ms = <100>;
   90                 };
   91 
   92                 /* ... */
   93         };

Cache object: 1f56a7beecd7625d4fdcd37fd61a9719

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/input/touchscreen/cyttsp.txt

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/input/touchscreen/cyttsp.txt