| 
     1 * Neonode infrared touchscreen controller
    2 
    3 Required properties:
    4 - compatible: must be "neonode,zforce"
    5 - reg: I2C address of the chip
    6 - interrupts: interrupt to which the chip is connected
    7 - reset-gpios: reset gpio the chip is connected to
    8 - x-size: horizontal resolution of touchscreen
    9 - y-size: vertical resolution of touchscreen
   10 
   11 Optional properties:
   12 - irq-gpios : interrupt gpio the chip is connected to
   13 - vdd-supply: Regulator controlling the controller supply
   14 
   15 Example:
   16 
   17         i2c@00000000 {
   18                 /* ... */
   19 
   20                 zforce_ts@50 {
   21                         compatible = "neonode,zforce";
   22                         reg = <0x50>;
   23                         interrupts = <2 0>;
   24                         vdd-supply = <®_zforce_vdd>;
   25 
   26                         reset-gpios = <&gpio5 9 0>; /* RST */
   27                         irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
   28 
   29                         x-size = <800>;
   30                         y-size = <600>;
   31                 };
   32 
   33                 /* ... */
   34         };
Cache object: 65e5fecd66920b71c722c6bce35ab192 
 
 |