FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v111.txt

     * Aptina MT9V111 CMOS sensor
     ----------------------------
     
     The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
     based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
     
     The sensor has an active pixel array of 640x480 pixels and can output a number
     of image resolution and formats controllable through a simple two-wires
     interface.
    
    Required properties:
    --------------------
    
    - compatible: shall be "aptina,mt9v111".
    - clocks: reference to the system clock input provider.
    
    Optional properties:
    --------------------
    
    - enable-gpios: output enable signal, pin name "OE#". Active low.
    - standby-gpios: low power state control signal, pin name "STANDBY".
      Active high.
    - reset-gpios: chip reset signal, pin name "RESET#". Active low.
    
    The device node must contain one 'port' child node with one 'endpoint' child
    sub-node for its digital output video port, in accordance with the video
    interface bindings defined in:
    Documentation/devicetree/bindings/media/video-interfaces.txt
    
    Example:
    --------
    
            &i2c1 {
                    camera@48 {
                            compatible = "aptina,mt9v111";
                            reg = <0x48>;
    
                            clocks = <&camera_clk>;
    
                            port {
                                    mt9v111_out: endpoint {
                                            remote-endpoint = <&ceu_in>;
                                    };
                            };
                    };
            };

Cache object: b4529d35155e02555ef8fa6a0d8f2130