aptina,mt9v111.yaml

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    2 %YAML 1.2
    3 ---
    4 $id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
    5 $schema: http://devicetree.org/meta-schemas/core.yaml#
    6 
    7 title: Aptina MT9V111 CMOS sensor
    8 
    9 maintainers:
   10   - Jacopo Mondi <jacopo@jmondi.org>
   11 
   12 description: |
   13   The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
   14   based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
   15 
   16   The sensor has an active pixel array of 640x480 pixels and can output a number
   17   of image resolutions and formats controllable through a simple two-wires
   18   interface.
   19 
   20 properties:
   21   compatible:
   22     const: aptina,mt9v111
   23 
   24   reg:
   25     maxItems: 1
   26 
   27   clocks:
   28     maxItems: 1
   29 
   30   enable-gpios:
   31     description: Enable signal, pin name "OE#". Active low.
   32     maxItems: 1
   33 
   34   standby-gpios:
   35     description: |
   36       Low power state control signal, pin name "STANDBY". Active high.
   37     maxItems: 1
   38 
   39   reset-gpios:
   40     description: Chip reset signal, pin name "RESET#". Active low.
   41     maxItems: 1
   42 
   43   port:
   44     $ref: /schemas/graph.yaml#/properties/port
   45     description: |
   46       Output video port.
   47 
   48 required:
   49   - compatible
   50   - reg
   51   - clocks
   52   - port
   53 
   54 additionalProperties: false
   55 
   56 examples:
   57   - |
   58     i2c0 {
   59         #address-cells = <1>;
   60         #size-cells = <0>;
   61 
   62         camera@48 {
   63             compatible = "aptina,mt9v111";
   64             reg = <0x48>;
   65             clocks = <&camera_clk>;
   66 
   67             port {
   68                 mt9v111_out: endpoint {
   69                     remote-endpoint = <&ceu_in>;
   70                 };
   71             };
   72         };
   73     };
   74 
   75 ...

Cache object: 18592f8dcc522bad84d310b2f2962232

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v111.yaml

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v111.yaml