| 
     1 MT9M001: 1/2-Inch Megapixel Digital Image Sensor
    2 
    3 The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
    4 image sensor. It is programmable through I2C interface.
    5 
    6 Required Properties:
    7 
    8 - compatible: shall be "onnn,mt9m001".
    9 - clocks: reference to the master clock into sensor
   10 
   11 Optional Properties:
   12 
   13 - reset-gpios: GPIO handle which is connected to the reset pin of the chip.
   14   Active low.
   15 - standby-gpios: GPIO handle which is connected to the standby pin of the chip.
   16   Active high.
   17 
   18 The device node must contain one 'port' child node with one 'endpoint' child
   19 sub-node for its digital output video port, in accordance with the video
   20 interface bindings defined in:
   21 Documentation/devicetree/bindings/media/video-interfaces.txt
   22 
   23 Example:
   24 
   25         &i2c1 {
   26                 camera-sensor@5d {
   27                         compatible = "onnn,mt9m001";
   28                         reg = <0x5d>;
   29                         reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
   30                         standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
   31                         clocks = <&camera_clk>;
   32                         port {
   33                                 mt9m001_out: endpoint {
   34                                         remote-endpoint = <&vcap_in>;
   35                                 };
   36                         };
   37                 };
   38         };
Cache object: 59fb1b4d1cbfb9be46b03719f8d50cc9 
 
 |