ovti,ov5693.yaml

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    2 # Copyright (c) 2022 Amarulasolutions
    3 %YAML 1.2
    4 ---
    5 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
    6 $schema: http://devicetree.org/meta-schemas/core.yaml#
    7 
    8 title: Omnivision OV5693 CMOS Sensor
    9 
   10 maintainers:
   11   - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
   12 
   13 description: |
   14   The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
   15   image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
   16   sub-sampled, and windowed 10-bit MIPI images in various formats via the
   17   Serial Camera Control Bus (SCCB) interface.
   18 
   19   OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
   20   The sensor output is available via CSI-2 serial data output (up to 2-lane).
   21 
   22 allOf:
   23   - $ref: /schemas/media/video-interface-devices.yaml#
   24 
   25 properties:
   26   compatible:
   27     const: ovti,ov5693
   28 
   29   reg:
   30     maxItems: 1
   31 
   32   clocks:
   33     description:
   34       System input clock (aka XVCLK). From 6 to 27 MHz.
   35     maxItems: 1
   36 
   37   dovdd-supply:
   38     description:
   39       Digital I/O voltage supply, 1.8V.
   40 
   41   avdd-supply:
   42     description:
   43       Analog voltage supply, 2.8V.
   44 
   45   dvdd-supply:
   46     description:
   47       Digital core voltage supply, 1.2V.
   48 
   49   reset-gpios:
   50     description:
   51       The phandle and specifier for the GPIO that controls sensor reset.
   52       This corresponds to the hardware pin XSHUTDN which is physically
   53       active low.
   54     maxItems: 1
   55 
   56   port:
   57     description: MIPI CSI-2 transmitter port
   58     $ref: /schemas/graph.yaml#/$defs/port-base
   59     additionalProperties: false
   60 
   61     properties:
   62       endpoint:
   63         $ref: /schemas/media/video-interfaces.yaml#
   64         unevaluatedProperties: false
   65 
   66         properties:
   67           link-frequencies: true
   68 
   69           data-lanes:
   70             minItems: 1
   71             maxItems: 2
   72 
   73         required:
   74           - data-lanes
   75           - link-frequencies
   76 
   77 required:
   78   - compatible
   79   - reg
   80   - clocks
   81   - port
   82 
   83 unevaluatedProperties: false
   84 
   85 examples:
   86   - |
   87     #include <dt-bindings/clock/px30-cru.h>
   88     #include <dt-bindings/gpio/gpio.h>
   89     #include <dt-bindings/pinctrl/rockchip.h>
   90 
   91     i2c {
   92         #address-cells = <1>;
   93         #size-cells = <0>;
   94 
   95         ov5693: camera@36 {
   96             compatible = "ovti,ov5693";
   97             reg = <0x36>;
   98 
   99             reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
  100             pinctrl-names = "default";
  101             pinctrl-0 = <&cif_clkout_m0>;
  102 
  103             clocks = <&cru SCLK_CIF_OUT>;
  104             assigned-clocks = <&cru SCLK_CIF_OUT>;
  105             assigned-clock-rates = <19200000>;
  106 
  107             avdd-supply = <&vcc_1v8>;
  108             dvdd-supply = <&vcc_1v2>;
  109             dovdd-supply = <&vcc_2v8>;
  110 
  111             rotation = <90>;
  112             orientation = <0>;
  113 
  114             port {
  115                 ucam_out: endpoint {
  116                     remote-endpoint = <&mipi_in_ucam>;
  117                     data-lanes = <1 2>;
  118                     link-frequencies = /bits/ 64 <450000000>;
  119                 };
  120             };
  121         };
  122     };
  123 
  124 ...

Cache object: 09700f4c967cb128ddc1dd2c5e424dda

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5693.yaml