The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/media/samsung-s5k6a3.txt

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 Samsung S5K6A3(YX) raw image sensor
    2 ---------------------------------
    3 
    4 S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
    5 and CCI (I2C compatible) control bus.
    6 
    7 Required properties:
    8 
    9 - compatible    : "samsung,s5k6a3";
   10 - reg           : I2C slave address of the sensor;
   11 - svdda-supply  : core voltage supply;
   12 - svddio-supply : I/O voltage supply;
   13 - afvdd-supply  : AF (actuator) voltage supply;
   14 - gpios         : specifier of a GPIO connected to the RESET pin;
   15 - clocks        : should contain list of phandle and clock specifier pairs
   16                   according to common clock bindings for the clocks described
   17                   in the clock-names property;
   18 - clock-names   : should contain "extclk" entry for the sensor's EXTCLK clock;
   19 
   20 Optional properties:
   21 
   22 - clock-frequency : the frequency at which the "extclk" clock should be
   23                     configured to operate, in Hz; if this property is not
   24                     specified default 24 MHz value will be used.
   25 
   26 The common video interfaces bindings (see video-interfaces.txt) should be
   27 used to specify link to the image data receiver. The S5K6A3(YX) device
   28 node should contain one 'port' child node with an 'endpoint' subnode.
   29 
   30 Following properties are valid for the endpoint node:
   31 
   32 - data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
   33   video-interfaces.txt.  The sensor supports only one data lane.

Cache object: 26519cca10b1f8742d6ccba87fbeb4ca


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.