| 
     1 Device-Tree bindings for ST IRB IP
    2 
    3 Required properties:
    4         - compatible: Should contain "st,comms-irb".
    5         - reg: Base physical address of the controller and length of memory
    6           mapped region.
    7         - interrupts: interrupt-specifier for the sole interrupt generated by
    8           the device. The interrupt specifier format depends on the interrupt
    9           controller parent.
   10         - rx-mode: can be "infrared" or "uhf". This property specifies the L1
   11           protocol used for receiving remote control signals. rx-mode should
   12           be present iff the rx pins are wired up.
   13         - tx-mode: should be "infrared". This property specifies the L1
   14           protocol used for transmitting remote control signals. tx-mode should
   15           be present iff the tx pins are wired up.
   16 
   17 Optional properties:
   18         - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
   19           properly for IRB pins.
   20         - clocks : phandle with clock-specifier pair for IRB.
   21 
   22 Example node:
   23 
   24         rc: rc@fe518000 {
   25                 compatible      = "st,comms-irb";
   26                 reg             = <0xfe518000 0x234>;
   27                 interrupts      = <0 203 0>;
   28                 rx-mode         = "infrared";
   29         };
Cache object: dbbefdfb4e6227e42f3d4567bb0f554f 
 
 |