The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/mfd/rohm,bd71828-pmic.yaml

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
    2 %YAML 1.2
    3 ---
    4 $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
    5 $schema: http://devicetree.org/meta-schemas/core.yaml#
    6 
    7 title: ROHM BD71828 Power Management Integrated Circuit bindings
    8 
    9 maintainers:
   10   - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
   11 
   12 description: |
   13   BD71828GW is a single-chip power management IC for battery-powered portable
   14   devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
   15   single-cell linear charger. Also included is a Coulomb counter, a real-time
   16   clock (RTC), and a 32.768 kHz clock gate.
   17 
   18 properties:
   19   compatible:
   20     const: rohm,bd71828
   21 
   22   reg:
   23     description:
   24       I2C slave address.
   25     maxItems: 1
   26 
   27   interrupts:
   28     maxItems: 1
   29 
   30   gpio-controller: true
   31 
   32   "#gpio-cells":
   33     const: 2
   34     description: |
   35       The first cell is the pin number and the second cell is used to specify
   36       flags. See ../gpio/gpio.txt for more information.
   37 
   38   clocks:
   39     maxItems: 1
   40 
   41   "#clock-cells":
   42     const: 0
   43 
   44   clock-output-names:
   45     const: bd71828-32k-out
   46 
   47   rohm,clkout-open-drain:
   48     description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
   49     $ref: "/schemas/types.yaml#/definitions/uint32"
   50     minimum: 0
   51     maximum: 1
   52 
   53   rohm,charger-sense-resistor-ohms:
   54     minimum: 10000000
   55     maximum: 50000000
   56     description: |
   57       BD71827 and BD71828 have SAR ADC for measuring charging currents.
   58       External sense resistor (RSENSE in data sheet) should be used. If some
   59       other but 30MOhm resistor is used the resistance value should be given
   60       here in Ohms.
   61 
   62   regulators:
   63     $ref: ../regulator/rohm,bd71828-regulator.yaml
   64     description:
   65       List of child nodes that specify the regulators.
   66 
   67   leds:
   68     $ref: ../leds/rohm,bd71828-leds.yaml
   69 
   70   gpio-reserved-ranges:
   71     description: |
   72       Usage of BD71828 GPIO pins can be changed via OTP. This property can be
   73       used to mark the pins which should not be configured for GPIO. Please see
   74       the ../gpio/gpio.txt for more information.
   75 
   76 required:
   77   - compatible
   78   - reg
   79   - interrupts
   80   - clocks
   81   - "#clock-cells"
   82   - regulators
   83   - gpio-controller
   84   - "#gpio-cells"
   85 
   86 additionalProperties: false
   87 
   88 examples:
   89   - |
   90     #include <dt-bindings/interrupt-controller/irq.h>
   91     #include <dt-bindings/leds/common.h>
   92     i2c {
   93         #address-cells = <1>;
   94         #size-cells = <0>;
   95         pmic: pmic@4b {
   96             compatible = "rohm,bd71828";
   97             reg = <0x4b>;
   98 
   99             interrupt-parent = <&gpio1>;
  100             interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
  101 
  102             clocks = <&osc 0>;
  103             #clock-cells = <0>;
  104             clock-output-names = "bd71828-32k-out";
  105 
  106             gpio-controller;
  107             #gpio-cells = <2>;
  108             gpio-reserved-ranges = <0 1>, <2 1>;
  109 
  110             rohm,charger-sense-resistor-ohms = <10000000>;
  111 
  112             regulators {
  113                 buck1: BUCK1 {
  114                     regulator-name = "buck1";
  115                     regulator-min-microvolt = <500000>;
  116                     regulator-max-microvolt = <2000000>;
  117                     regulator-ramp-delay = <2500>;
  118                 };
  119                 buck2: BUCK2 {
  120                     regulator-name = "buck2";
  121                     regulator-min-microvolt = <500000>;
  122                     regulator-max-microvolt = <2000000>;
  123                     regulator-ramp-delay = <2500>;
  124                 };
  125                 buck3: BUCK3 {
  126                     regulator-name = "buck3";
  127                     regulator-min-microvolt = <1200000>;
  128                     regulator-max-microvolt = <2000000>;
  129                 };
  130                 buck4: BUCK4 {
  131                     regulator-name = "buck4";
  132                     regulator-min-microvolt = <1000000>;
  133                     regulator-max-microvolt = <1800000>;
  134                 };
  135                 buck5: BUCK5 {
  136                     regulator-name = "buck5";
  137                     regulator-min-microvolt = <2500000>;
  138                     regulator-max-microvolt = <3300000>;
  139                 };
  140                 buck6: BUCK6 {
  141                     regulator-name = "buck6";
  142                     regulator-min-microvolt = <500000>;
  143                     regulator-max-microvolt = <2000000>;
  144                     regulator-ramp-delay = <2500>;
  145                 };
  146                 buck7: BUCK7 {
  147                     regulator-name = "buck7";
  148                     regulator-min-microvolt = <500000>;
  149                     regulator-max-microvolt = <2000000>;
  150                     regulator-ramp-delay = <2500>;
  151                 };
  152                 ldo1: LDO1 {
  153                     regulator-name = "ldo1";
  154                     regulator-min-microvolt = <800000>;
  155                     regulator-max-microvolt = <3300000>;
  156                 };
  157                 ldo2: LDO2 {
  158                     regulator-name = "ldo2";
  159                     regulator-min-microvolt = <800000>;
  160                     regulator-max-microvolt = <3300000>;
  161                 };
  162                 ldo3: LDO3 {
  163                     regulator-name = "ldo3";
  164                     regulator-min-microvolt = <800000>;
  165                     regulator-max-microvolt = <3300000>;
  166                 };
  167                 ldo4: LDO4 {
  168                     regulator-name = "ldo4";
  169                     regulator-min-microvolt = <800000>;
  170                     regulator-max-microvolt = <3300000>;
  171                 };
  172                 ldo5: LDO5 {
  173                     regulator-name = "ldo5";
  174                     regulator-min-microvolt = <800000>;
  175                     regulator-max-microvolt = <3300000>;
  176                 };
  177                 ldo6: LDO6 {
  178                     regulator-name = "ldo6";
  179                     regulator-min-microvolt = <1800000>;
  180                     regulator-max-microvolt = <1800000>;
  181                 };
  182                 ldo7_reg: LDO7 {
  183                     regulator-name = "ldo7";
  184                     regulator-min-microvolt = <800000>;
  185                     regulator-max-microvolt = <3300000>;
  186                 };
  187             };
  188 
  189             leds {
  190                 compatible = "rohm,bd71828-leds";
  191 
  192                 led-1 {
  193                     rohm,led-compatible = "bd71828-grnled";
  194                     function = LED_FUNCTION_INDICATOR;
  195                     color = <LED_COLOR_ID_GREEN>;
  196                 };
  197                 led-2 {
  198                     rohm,led-compatible = "bd71828-ambled";
  199                     function = LED_FUNCTION_CHARGING;
  200                     color = <LED_COLOR_ID_AMBER>;
  201                 };
  202             };
  203         };
  204     };

Cache object: 2422f6916c1931d7dff37a91244c6862


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.