The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/mmc/synopsys-dw-mshc-common.yaml

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 # SPDX-License-Identifier: GPL-2.0
    2 %YAML 1.2
    3 ---
    4 $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
    5 $schema: http://devicetree.org/meta-schemas/core.yaml#
    6 
    7 title: Synopsys Designware Mobile Storage Host Controller Common Properties
    8 
    9 allOf:
   10   - $ref: "mmc-controller.yaml#"
   11 
   12 maintainers:
   13   - Ulf Hansson <ulf.hansson@linaro.org>
   14 
   15 # Everything else is described in the common file
   16 properties:
   17   resets:
   18     maxItems: 1
   19 
   20   reset-names:
   21     const: reset
   22 
   23   clock-frequency:
   24     description:
   25       Should be the frequency (in Hz) of the ciu clock.  If this
   26       is specified and the ciu clock is specified then we'll try to set the ciu
   27       clock to this at probe time.
   28 
   29   fifo-depth:
   30     description:
   31       The maximum size of the tx/rx fifo's. If this property is not
   32       specified, the default value of the fifo size is determined from the
   33       controller registers.
   34     $ref: /schemas/types.yaml#/definitions/uint32
   35 
   36   card-detect-delay:
   37     description:
   38       Delay in milli-seconds before detecting card after card
   39       insert event. The default value is 0.
   40     $ref: /schemas/types.yaml#/definitions/uint32
   41     default: 0
   42 
   43   data-addr:
   44     description:
   45       Override fifo address with value provided by DT. The default FIFO reg
   46       offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
   47       by driver. If the controller does not follow this rule, please use
   48       this property to set fifo address in device tree.
   49     $ref: /schemas/types.yaml#/definitions/uint32
   50 
   51   fifo-watermark-aligned:
   52     description:
   53       Data done irq is expected if data length is less than
   54       watermark in PIO mode. But fifo watermark is requested to be aligned
   55       with data length in some SoC so that TX/RX irq can be generated with
   56       data done irq. Add this watermark quirk to mark this requirement and
   57       force fifo watermark setting accordingly.
   58     $ref: /schemas/types.yaml#/definitions/flag
   59 
   60   dmas:
   61     maxItems: 1
   62 
   63   dma-names:
   64     const: rx-tx
   65 
   66 additionalProperties: true

Cache object: 8644ff82288e04194352a1f692ef81b1


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.