| 
     1 * Oxford Semiconductor OXNAS DWMAC Ethernet controller
    2 
    3 The device inherits all the properties of the dwmac/stmmac devices
    4 described in the file stmmac.txt in the current directory with the
    5 following changes.
    6 
    7 Required properties on all platforms:
    8 
    9 - compatible:   For the OX820 SoC, it should be :
   10                 - "oxsemi,ox820-dwmac" to select glue
   11                 - "snps,dwmac-3.512" to select IP version.
   12                 For the OX810SE SoC, it should be :
   13                 - "oxsemi,ox810se-dwmac" to select glue
   14                 - "snps,dwmac-3.512" to select IP version.
   15 
   16 - clocks: Should contain phandles to the following clocks
   17 - clock-names:  Should contain the following:
   18                 - "stmmaceth" for the host clock - see stmmac.txt
   19                 - "gmac" for the peripheral gate clock
   20 
   21 - oxsemi,sys-ctrl: a phandle to the system controller syscon node
   22 
   23 Example :
   24 
   25 etha: ethernet@40400000 {
   26         compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512";
   27         reg = <0x40400000 0x2000>;
   28         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
   29                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
   30         interrupt-names = "macirq", "eth_wake_irq";
   31         mac-address = [000000000000]; /* Filled in by U-Boot */
   32         phy-mode = "rgmii";
   33 
   34         clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
   35         clock-names = "gmac", "stmmaceth";
   36         resets = <&reset RESET_MAC>;
   37 
   38         /* Regmap for sys registers */
   39         oxsemi,sys-ctrl = <&sys>;
   40 
   41 };
Cache object: caa8932adfbafd3cf51c1d641295fa87 
 
 |