brcm,bcm4329-fmac.yaml

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
    2 %YAML 1.2
    3 ---
    4 $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
    5 $schema: http://devicetree.org/meta-schemas/core.yaml#
    6 
    7 title: Broadcom BCM4329 family fullmac wireless SDIO devices
    8 
    9 maintainers:
   10   - Arend van Spriel <arend@broadcom.com>
   11 
   12 description:
   13   The Broadcom Single chip MAC part for the BCM4329 family and
   14   later Cypress chips in the same family named CYW4373 and similar.
   15   These chips also have a Bluetooth portion described in a separate
   16   binding.
   17 
   18 properties:
   19   compatible:
   20     oneOf:
   21       - items:
   22           - enum:
   23               - brcm,bcm43143-fmac
   24               - brcm,bcm4341b0-fmac
   25               - brcm,bcm4341b4-fmac
   26               - brcm,bcm4341b5-fmac
   27               - brcm,bcm4329-fmac
   28               - brcm,bcm4330-fmac
   29               - brcm,bcm4334-fmac
   30               - brcm,bcm43340-fmac
   31               - brcm,bcm4335-fmac
   32               - brcm,bcm43362-fmac
   33               - brcm,bcm4339-fmac
   34               - brcm,bcm43430a0-fmac
   35               - brcm,bcm43430a1-fmac
   36               - brcm,bcm43455-fmac
   37               - brcm,bcm43456-fmac
   38               - brcm,bcm4354-fmac
   39               - brcm,bcm4356-fmac
   40               - brcm,bcm4359-fmac
   41               - cypress,cyw4373-fmac
   42               - cypress,cyw43012-fmac
   43           - const: brcm,bcm4329-fmac
   44       - const: brcm,bcm4329-fmac
   45 
   46   reg:
   47     description: SDIO function number for the device, for most cases
   48       this will be 1.
   49 
   50   interrupts:
   51     maxItems: 1
   52     description: Out-of-band (OOB) IRQ line for waking up the host
   53       in response to WLAN activity. This corresponds to the HOST_WAKE
   54       line into the chip.
   55 
   56   interrupt-names:
   57     description: Name for the OOB IRQ, this must be set to "host-wake".
   58     const: host-wake
   59 
   60   brcm,drive-strength:
   61     $ref: /schemas/types.yaml#/definitions/uint32
   62     description: Drive strength used for the SDIO pins on the device in mA.
   63     minimum: 0
   64     maximum: 32
   65 
   66   reset-gpios:
   67     maxItems: 1
   68     description: A GPIO line connected to the WL_RST line, if present
   69       this shall be flagged as active low.
   70 
   71   brcm,ccode-map:
   72     $ref: /schemas/types.yaml#/definitions/string-array
   73     description: Multiple strings for translating ISO3166 country code to
   74       brcmfmac firmware country code and revision.
   75     items:
   76       pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
   77 
   78   brcm,ccode-map-trivial:
   79     description: |
   80       Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
   81       country code and revision: cc -> { cc, 0 }. In other words, assume that
   82       the CLM blob firmware uses ISO3166 country codes as well, and that all
   83       revisions are zero. This property is mutually exclusive with
   84       brcm,ccode-map. If both properties are specified, then brcm,ccode-map
   85       takes precedence.
   86     type: boolean
   87 
   88 required:
   89   - compatible
   90   - reg
   91 
   92 additionalProperties: false
   93 
   94 examples:
   95   - |
   96     #include <dt-bindings/interrupt-controller/irq.h>
   97     #include <dt-bindings/gpio/gpio.h>
   98     mmc@80118000 {
   99       compatible = "arm,pl18x", "arm,primecell";
  100       reg = <0x80118000 0x1000>;
  101       clocks = <&clk 0>, <&clk 1>;
  102       clock-names = "mclk", "apb_pclk";
  103       interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
  104       bus-width = <4>;
  105       non-removable;
  106       vmmc-supply = <&wl_bt_reg>;
  107       #address-cells = <1>;
  108       #size-cells = <0>;
  109 
  110       wifi@1 {
  111         compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
  112         reg = <1>;
  113         interrupt-parent = <&gpio>;
  114         interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
  115         interrupt-names = "host-wake";
  116         reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  117         brcm,ccode-map = "JP-JP-78", "US-Q2-86";
  118       };
  119     };

Cache object: 565e72d619c445924145e4b809ea33bf

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/net/wireless/brcm,bcm4329-fmac.yaml

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/net/wireless/brcm,bcm4329-fmac.yaml