opp-v2-kryo-cpu.yaml

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    2 %YAML 1.2
    3 ---
    4 $id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
    5 $schema: http://devicetree.org/meta-schemas/core.yaml#
    6 
    7 title: Qualcomm Technologies, Inc. NVMEM OPP bindings
    8 
    9 maintainers:
   10   - Ilia Lin <ilia.lin@kernel.org>
   11 
   12 allOf:
   13   - $ref: opp-v2-base.yaml#
   14 
   15 description: |
   16   In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
   17   the CPU frequencies subset and voltage value of each OPP varies based on
   18   the silicon variant in use.
   19   Qualcomm Technologies, Inc. Process Voltage Scaling Tables
   20   defines the voltage and frequency value based on the speedbin blown in
   21   the efuse combination.
   22   The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
   23   the OPP framework with required information (existing HW bitmap).
   24   This is used to determine the voltage and frequency value for each OPP of
   25   operating-points-v2 table when it is parsed by the OPP framework.
   26 
   27 properties:
   28   compatible:
   29     const: operating-points-v2-kryo-cpu
   30 
   31   nvmem-cells:
   32     description: |
   33       A phandle pointing to a nvmem-cells node representing the
   34       efuse registers that has information about the
   35       speedbin that is used to select the right frequency/voltage
   36       value pair.
   37 
   38   opp-shared: true
   39 
   40 patternProperties:
   41   '^opp-?[0-9]+$':
   42     type: object
   43     additionalProperties: false
   44 
   45     properties:
   46       opp-hz: true
   47 
   48       opp-microvolt: true
   49 
   50       opp-supported-hw:
   51         description: |
   52           A single 32 bit bitmap value, representing compatible HW.
   53           Bitmap:
   54           0:  MSM8996, speedbin 0
   55           1:  MSM8996, speedbin 1
   56           2:  MSM8996, speedbin 2
   57           3-31:  unused
   58         maximum: 0x7
   59 
   60       clock-latency-ns: true
   61 
   62       required-opps: true
   63 
   64     required:
   65       - opp-hz
   66 
   67 required:
   68   - compatible
   69 
   70 if:
   71   required:
   72     - nvmem-cells
   73 then:
   74   patternProperties:
   75     '^opp-?[0-9]+$':
   76       required:
   77         - opp-supported-hw
   78 
   79 additionalProperties: false
   80 
   81 examples:
   82   - |
   83     / {
   84         model = "Qualcomm Technologies, Inc. DB820c";
   85         compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
   86         #address-cells = <2>;
   87         #size-cells = <2>;
   88 
   89         cpus {
   90             #address-cells = <2>;
   91             #size-cells = <0>;
   92 
   93             CPU0: cpu@0 {
   94                 device_type = "cpu";
   95                 compatible = "qcom,kryo";
   96                 reg = <0x0 0x0>;
   97                 enable-method = "psci";
   98                 cpu-idle-states = <&CPU_SLEEP_0>;
   99                 capacity-dmips-mhz = <1024>;
  100                 clocks = <&kryocc 0>;
  101                 operating-points-v2 = <&cluster0_opp>;
  102                 power-domains = <&cpr>;
  103                 power-domain-names = "cpr";
  104                 #cooling-cells = <2>;
  105                 next-level-cache = <&L2_0>;
  106                 L2_0: l2-cache {
  107                     compatible = "cache";
  108                     cache-level = <2>;
  109                 };
  110             };
  111 
  112             CPU1: cpu@1 {
  113                 device_type = "cpu";
  114                 compatible = "qcom,kryo";
  115                 reg = <0x0 0x1>;
  116                 enable-method = "psci";
  117                 cpu-idle-states = <&CPU_SLEEP_0>;
  118                 capacity-dmips-mhz = <1024>;
  119                 clocks = <&kryocc 0>;
  120                 operating-points-v2 = <&cluster0_opp>;
  121                 power-domains = <&cpr>;
  122                 power-domain-names = "cpr";
  123                 #cooling-cells = <2>;
  124                 next-level-cache = <&L2_0>;
  125             };
  126 
  127             CPU2: cpu@100 {
  128                 device_type = "cpu";
  129                 compatible = "qcom,kryo";
  130                 reg = <0x0 0x100>;
  131                 enable-method = "psci";
  132                 cpu-idle-states = <&CPU_SLEEP_0>;
  133                 capacity-dmips-mhz = <1024>;
  134                 clocks = <&kryocc 1>;
  135                 operating-points-v2 = <&cluster1_opp>;
  136                 power-domains = <&cpr>;
  137                 power-domain-names = "cpr";
  138                 #cooling-cells = <2>;
  139                 next-level-cache = <&L2_1>;
  140                 L2_1: l2-cache {
  141                     compatible = "cache";
  142                     cache-level = <2>;
  143                 };
  144             };
  145 
  146             CPU3: cpu@101 {
  147                 device_type = "cpu";
  148                 compatible = "qcom,kryo";
  149                 reg = <0x0 0x101>;
  150                 enable-method = "psci";
  151                 cpu-idle-states = <&CPU_SLEEP_0>;
  152                 capacity-dmips-mhz = <1024>;
  153                 clocks = <&kryocc 1>;
  154                 operating-points-v2 = <&cluster1_opp>;
  155                 power-domains = <&cpr>;
  156                 power-domain-names = "cpr";
  157                 #cooling-cells = <2>;
  158                 next-level-cache = <&L2_1>;
  159             };
  160 
  161             cpu-map {
  162                 cluster0 {
  163                     core0 {
  164                         cpu = <&CPU0>;
  165                     };
  166 
  167                     core1 {
  168                         cpu = <&CPU1>;
  169                     };
  170                 };
  171 
  172                 cluster1 {
  173                     core0 {
  174                         cpu = <&CPU2>;
  175                     };
  176 
  177                     core1 {
  178                         cpu = <&CPU3>;
  179                     };
  180                 };
  181             };
  182         };
  183 
  184         cluster0_opp: opp-table-0 {
  185             compatible = "operating-points-v2-kryo-cpu";
  186             nvmem-cells = <&speedbin_efuse>;
  187             opp-shared;
  188 
  189             opp-307200000 {
  190                 opp-hz = /bits/ 64 <307200000>;
  191                 opp-microvolt = <905000 905000 1140000>;
  192                 opp-supported-hw = <0x7>;
  193                 clock-latency-ns = <200000>;
  194                 required-opps = <&cpr_opp1>;
  195             };
  196             opp-1401600000 {
  197                 opp-hz = /bits/ 64 <1401600000>;
  198                 opp-microvolt = <1140000 905000 1140000>;
  199                 opp-supported-hw = <0x5>;
  200                 clock-latency-ns = <200000>;
  201                 required-opps = <&cpr_opp2>;
  202             };
  203             opp-1593600000 {
  204                 opp-hz = /bits/ 64 <1593600000>;
  205                 opp-microvolt = <1140000 905000 1140000>;
  206                 opp-supported-hw = <0x1>;
  207                 clock-latency-ns = <200000>;
  208                 required-opps = <&cpr_opp3>;
  209             };
  210         };
  211 
  212         cluster1_opp: opp-table-1 {
  213             compatible = "operating-points-v2-kryo-cpu";
  214             nvmem-cells = <&speedbin_efuse>;
  215             opp-shared;
  216 
  217             opp-307200000 {
  218                 opp-hz = /bits/ 64 <307200000>;
  219                 opp-microvolt = <905000 905000 1140000>;
  220                 opp-supported-hw = <0x7>;
  221                 clock-latency-ns = <200000>;
  222                 required-opps = <&cpr_opp1>;
  223             };
  224             opp-1804800000 {
  225                 opp-hz = /bits/ 64 <1804800000>;
  226                 opp-microvolt = <1140000 905000 1140000>;
  227                 opp-supported-hw = <0x6>;
  228                 clock-latency-ns = <200000>;
  229                 required-opps = <&cpr_opp4>;
  230             };
  231             opp-1900800000 {
  232                 opp-hz = /bits/ 64 <1900800000>;
  233                 opp-microvolt = <1140000 905000 1140000>;
  234                 opp-supported-hw = <0x4>;
  235                 clock-latency-ns = <200000>;
  236                 required-opps = <&cpr_opp5>;
  237             };
  238             opp-2150400000 {
  239                 opp-hz = /bits/ 64 <2150400000>;
  240                 opp-microvolt = <1140000 905000 1140000>;
  241                 opp-supported-hw = <0x1>;
  242                 clock-latency-ns = <200000>;
  243                 required-opps = <&cpr_opp6>;
  244             };
  245         };
  246 
  247         smem {
  248             compatible = "qcom,smem";
  249             memory-region = <&smem_mem>;
  250             hwlocks = <&tcsr_mutex 3>;
  251         };
  252 
  253         soc {
  254             #address-cells = <1>;
  255             #size-cells = <1>;
  256 
  257             qfprom: qfprom@74000 {
  258                 compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
  259                 reg = <0x00074000 0x8ff>;
  260                 #address-cells = <1>;
  261                 #size-cells = <1>;
  262 
  263                 speedbin_efuse: speedbin@133 {
  264                     reg = <0x133 0x1>;
  265                     bits = <5 3>;
  266                 };
  267             };
  268         };
  269     };

Cache object: a08a183f4de2aa9917deabd758733128

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/opp/opp-v2-kryo-cpu.yaml

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/opp/opp-v2-kryo-cpu.yaml