keystone-usb-phy.txt

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 TI Keystone USB PHY
    2 
    3 Required properties:
    4  - compatible: should be "ti,keystone-usbphy".
    5  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
    6    with 'reg' property.
    7  - reg : Address and length of the usb phy control register set.
    8 
    9 The main purpose of this PHY driver is to enable the USB PHY reference clock
   10 gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
   11 an NOP PHY driver.  Hence this node is referenced as both the usb2 and usb3
   12 phy node in the USB Glue layer driver node.
   13 
   14 usb_phy: usb_phy@2620738 {
   15         compatible = "ti,keystone-usbphy";
   16         #address-cells = <1>;
   17         #size-cells = <1>;
   18         reg = <0x2620738 32>;
   19 };

Cache object: fbf1fef435b6e833b8b67bd28460d606

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/phy/keystone-usb-phy.txt

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/phy/keystone-usb-phy.txt