ti,tcan104x-can.yaml

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    2 %YAML 1.2
    3 ---
    4 $id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
    5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
    6 
    7 title: TCAN104x CAN TRANSCEIVER PHY
    8 
    9 maintainers:
   10   - Aswath Govindraju <a-govindraju@ti.com>
   11 
   12 properties:
   13   $nodename:
   14     pattern: "^can-phy"
   15 
   16   compatible:
   17     enum:
   18       - ti,tcan1042
   19       - ti,tcan1043
   20 
   21   '#phy-cells':
   22     const: 0
   23 
   24   standby-gpios:
   25     description:
   26       gpio node to toggle standby signal on transceiver
   27     maxItems: 1
   28 
   29   enable-gpios:
   30     description:
   31       gpio node to toggle enable signal on transceiver
   32     maxItems: 1
   33 
   34   max-bitrate:
   35     $ref: /schemas/types.yaml#/definitions/uint32
   36     description:
   37       max bit rate supported in bps
   38     minimum: 1
   39 
   40   mux-states:
   41     description:
   42       mux controller node to route the signals from controller to
   43       transceiver.
   44     maxItems: 1
   45 
   46 required:
   47   - compatible
   48   - '#phy-cells'
   49 
   50 additionalProperties: false
   51 
   52 examples:
   53   - |
   54     #include <dt-bindings/gpio/gpio.h>
   55 
   56     transceiver1: can-phy {
   57       compatible = "ti,tcan1043";
   58       #phy-cells = <0>;
   59       max-bitrate = <5000000>;
   60       standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
   61       enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
   62       mux-states = <&mux0 1>;
   63     };

Cache object: 0be57ec1bb1a0adb38d8ca95d96cf93d

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/Bindings/phy/ti,tcan104x-can.yaml

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/phy/ti,tcan104x-can.yaml