FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml

     # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
     %YAML 1.2
     ---
     $id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml#
     $schema: http://devicetree.org/meta-schemas/core.yaml#
     
     title: Qualcomm Technologies, Inc. MDM9607 TLMM block
     
     maintainers:
      - Konrad Dybcio <konrad.dybcio@somainline.org>
    
    description: |
      This binding describes the Top Level Mode Multiplexer block found in the
      MDM9607 platform.
    
    allOf:
      - $ref: "pinctrl.yaml#"
      - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
    
    properties:
      compatible:
        const: qcom,mdm9607-tlmm
    
      reg:
        maxItems: 1
    
      interrupts: true
      interrupt-controller: true
      '#interrupt-cells': true
      gpio-controller: true
      gpio-reserved-ranges: true
      '#gpio-cells': true
      gpio-ranges: true
      wakeup-parent: true
    
    required:
      - compatible
      - reg
    
    additionalProperties: false
    
    patternProperties:
      '-state$':
        oneOf:
          - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
          - patternProperties:
              ".*":
                $ref: "#/$defs/qcom-mdm9607-tlmm-state"
    
    '$defs':
      qcom-mdm9607-tlmm-state:
        type: object
        description:
          Pinctrl node's client devices use subnodes for desired pin configuration.
          Client device subnodes use below standard properties.
        $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
    
        properties:
          pins:
            description:
              List of gpio pins affected by the properties specified in this
              subnode.
            items:
              oneOf:
                - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
                - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
                          sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
                          qdsd_data3 ]
            minItems: 1
            maxItems: 16
    
          function:
            description:
              Specify the alternative function to be configured for the specified
              pins.
    
            enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
                    atest_char1, atest_char2, atest_char3,
                    atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
                    atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
                    bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
                    blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
                    blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
                    blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
                    blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
                    codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
                    cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
                    ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
                    gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
                    gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
                    gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
                    nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
                    nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
                    pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
                    pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
                    ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
                    pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
                    pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
                    qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
                   qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
                   qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
                   qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
                   rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
                   sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
                   uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
                   uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
   
         bias-disable: true
         bias-pull-down: true
         bias-pull-up: true
         drive-strength: true
         input-enable: true
         output-high: true
         output-low: true
   
       required:
         - pins
         - function
   
       additionalProperties: false
   
   examples:
     - |
           #include <dt-bindings/interrupt-controller/arm-gic.h>
           tlmm: pinctrl@1000000 {
             compatible = "qcom,mdm9607-tlmm";
             reg = <0x01000000 0x300000>;
             interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
             gpio-controller;
             gpio-ranges = <&msmgpio 0 0 80>;
             #gpio-cells = <2>;
             interrupt-controller;
             #interrupt-cells = <2>;
           };

Cache object: 93d44eb01d05516e8ff2acaa3ddc890b