FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml

     # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
     %YAML 1.2
     ---
     $id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
     $schema: http://devicetree.org/meta-schemas/core.yaml#
     title: Qualcomm Technologies, Inc. SM6125 TLMM block
     
     maintainers:
       - Martin Botka <martin.botka@somainline.org>
    
    description: |
      This binding describes the Top Level Mode Multiplexer (TLMM) block found
      in the SM6125 platform.
    
    allOf:
      - $ref: "pinctrl.yaml#"
      - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
    
    properties:
      compatible:
        const: qcom,sm6125-tlmm
    
      reg:
        minItems: 3
        maxItems: 3
    
      reg-names:
        items:
          - const: "west"
          - const: "south"
          - const: "east"
    
      interrupts: true
      interrupt-controller: true
      '#interrupt-cells': true
      gpio-controller: true
      gpio-reserved-ranges: true
      '#gpio-cells': true
      gpio-ranges: true
      wakeup-parent: true
    
    required:
      - compatible
      - reg
      - reg-names
    
    additionalProperties: false
    
    patternProperties:
      '-state$':
        oneOf:
          - $ref: "#/$defs/qcom-sm6125-tlmm-state"
          - patternProperties:
              ".*":
                $ref: "#/$defs/qcom-sm6125-tlmm-state"
    
    $defs:
      qcom-sm6125-tlmm-state:
        type: object
        description:
          Pinctrl node's client devices use subnodes for desired pin configuration.
          Client device subnodes use below standard properties.
        $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
    
        properties:
          pins:
            description:
              List of gpio pins affected by the properties specified in this
              subnode.
            items:
              oneOf:
                - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
                - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
            minItems: 1
            maxItems: 36
    
          function:
            description:
              Specify the alternative function to be configured for the specified
              pins.
    
            enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
                    atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
                    atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
                    atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
                    audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
                    cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
                    cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
                    ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
                    dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
                    gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
                    ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
                    mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
                    nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
                    pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
                    qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
                    qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
                    swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
                    uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
                   uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
                   wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
   
   
         bias-disable: true
         bias-pull-down: true
         bias-pull-up: true
         drive-strength: true
         input-enable: true
         output-high: true
         output-low: true
   
       required:
         - pins
         - function
   
       additionalProperties: false
   
   examples:
     - |
           #include <dt-bindings/interrupt-controller/arm-gic.h>
           pinctrl@500000 {
                   compatible = "qcom,sm6125-tlmm";
                   reg = <0x00500000 0x400000>,
                       <0x00900000 0x400000>,
                       <0x00d00000 0x400000>;
                   reg-names = "west", "south", "east";
                   interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
                   gpio-controller;
                   gpio-ranges = <&tlmm 0 0 134>;
                   #gpio-cells = <2>;
                   interrupt-controller;
                   #interrupt-cells = <2>;
           };

Cache object: 4a03115e240bd969646f7805a8e2bd77