FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml

     # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
     %YAML 1.2
     ---
     $id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml#
     $schema: http://devicetree.org/meta-schemas/core.yaml#
     
     title: Qualcomm Technologies, Inc. SM8350 TLMM block
     
     maintainers:
      - Vinod Koul <vkoul@kernel.org>
    
    description: |
      This binding describes the Top Level Mode Multiplexer (TLMM) block found
      in the SM8350 platform.
    
    allOf:
      - $ref: "pinctrl.yaml#"
      - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
    
    properties:
      compatible:
        const: qcom,sm8350-tlmm
    
      reg:
        maxItems: 1
    
      interrupts: true
      interrupt-controller: true
      '#interrupt-cells': true
      gpio-controller: true
      gpio-reserved-ranges: true
      '#gpio-cells': true
      gpio-ranges: true
      wakeup-parent: true
    
    required:
      - compatible
      - reg
    
    additionalProperties: false
    
    patternProperties:
      '-state$':
        oneOf:
          - $ref: "#/$defs/qcom-sm8350-tlmm-state"
          - patternProperties:
              ".*":
                $ref: "#/$defs/qcom-sm8350-tlmm-state"
    
    $defs:
      qcom-sm8350-tlmm-state:
        type: object
        description:
          Pinctrl node's client devices use subnodes for desired pin configuration.
          Client device subnodes use below standard properties.
        $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
    
        properties:
          pins:
            description:
              List of gpio pins affected by the properties specified in this
              subnode.
            items:
              oneOf:
                - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
                - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
            minItems: 1
            maxItems: 36
    
          function:
            description:
              Specify the alternative function to be configured for the specified
              pins.
    
            enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
                    cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
                    cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
                    ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
                    gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
                    mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
                    mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck,
                    mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
                    mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
                    mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
                    mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator,
                    pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk,
                    pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
                    qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
                    qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0,
                    qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10,
                    qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19,
                    qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5,
                    qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
                    sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
                    tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
                    uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
                    uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
    
    
         bias-disable: true
         bias-pull-down: true
         bias-pull-up: true
         drive-strength: true
         input-enable: true
         output-high: true
         output-low: true
   
       required:
         - pins
         - function
   
       additionalProperties: false
   
   examples:
     - |
           #include <dt-bindings/interrupt-controller/arm-gic.h>
           pinctrl@f100000 {
                   compatible = "qcom,sm8350-tlmm";
                   reg = <0x0f100000 0x300000>;
                   interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
                   gpio-controller;
                   #gpio-cells = <2>;
                   interrupt-controller;
                   #interrupt-cells = <2>;
                   gpio-ranges = <&tlmm 0 0 203>;
   
                   gpio-wo-subnode-state {
                           pins = "gpio1";
                           function = "gpio";
                   };
   
                   uart-w-subnodes-state {
                           rx {
                                   pins = "gpio18";
                                   function = "qup3";
                                   bias-pull-up;
                           };
   
                           tx {
                                   pins = "gpio19";
                                   function = "qup3";
                                   bias-disable;
                           };
                   };
           };
   ...

Cache object: f08285fb7a9c68ccbdb311205487a22b